提交 9830c62a 编写于 作者: A Alexander Aring 提交者: Marcel Holtmann

ieee820154: add short_addr setting support

This patch adds support for setting short address via nl802154 framework.
Also added a comment because a 0xffff seems to be valid address that we
don't have a short address. This is a valid setting but we need
more checks in upper layers to don't allow this address as source address.
Also the current netlink interface doesn't allow to set the short_addr
to 0xffff. Same for the 0xfffe short address which describes a not
allocated short address.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
上级 702bf371
......@@ -31,6 +31,8 @@
#define IEEE802154_MIN_PSDU_LEN 5
#define IEEE802154_PAN_ID_BROADCAST 0xffff
#define IEEE802154_ADDR_SHORT_BROADCAST 0xffff
#define IEEE802154_ADDR_SHORT_UNSPEC 0xfffe
#define IEEE802154_EXTENDED_ADDR_LEN 8
......
......@@ -40,6 +40,8 @@ struct cfg802154_ops {
int (*set_channel)(struct wpan_phy *wpan_phy, u8 page, u8 channel);
int (*set_pan_id)(struct wpan_phy *wpan_phy,
struct wpan_dev *wpan_dev, u16 pan_id);
int (*set_short_addr)(struct wpan_phy *wpan_phy,
struct wpan_dev *wpan_dev, u16 short_addr);
};
struct wpan_phy {
......
......@@ -593,6 +593,29 @@ static int nl802154_set_pan_id(struct sk_buff *skb, struct genl_info *info)
return rdev_set_pan_id(rdev, wpan_dev, pan_id);
}
static int nl802154_set_short_addr(struct sk_buff *skb, struct genl_info *info)
{
struct cfg802154_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
u16 short_addr;
/* conflict here while tx/rx calls */
if (netif_running(dev))
return -EBUSY;
/* don't change address fields on monitor */
if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
return -EINVAL;
if (!info->attrs[NL802154_ATTR_SHORT_ADDR])
return -EINVAL;
short_addr = nla_get_u16(info->attrs[NL802154_ATTR_SHORT_ADDR]);
return rdev_set_short_addr(rdev, wpan_dev, short_addr);
}
#define NL802154_FLAG_NEED_WPAN_PHY 0x01
#define NL802154_FLAG_NEED_NETDEV 0x02
#define NL802154_FLAG_NEED_RTNL 0x04
......@@ -719,6 +742,14 @@ static const struct genl_ops nl802154_ops[] = {
.internal_flags = NL802154_FLAG_NEED_NETDEV |
NL802154_FLAG_NEED_RTNL,
},
{
.cmd = NL802154_CMD_SET_SHORT_ADDR,
.doit = nl802154_set_short_addr,
.policy = nl802154_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL802154_FLAG_NEED_NETDEV |
NL802154_FLAG_NEED_RTNL,
},
};
/* initialisation/exit functions */
......
......@@ -34,4 +34,11 @@ rdev_set_pan_id(struct cfg802154_registered_device *rdev,
return rdev->ops->set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id);
}
static inline int
rdev_set_short_addr(struct cfg802154_registered_device *rdev,
struct wpan_dev *wpan_dev, u16 short_addr)
{
return rdev->ops->set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr);
}
#endif /* __CFG802154_RDEV_OPS */
......@@ -83,9 +83,35 @@ static int ieee802154_set_pan_id(struct wpan_phy *wpan_phy,
return 0;
}
static int
ieee802154_set_short_addr(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev,
const u16 short_addr)
{
ASSERT_RTNL();
/* TODO
* I am not sure about to check here on broadcast short_addr.
* Broadcast is a valid setting, comment from 802.15.4:
* A value of 0xfffe indicates that the device has
* associated but has not been allocated an address. A
* value of 0xffff indicates that the device does not
* have a short address.
*
* I think we should allow to set these settings but
* don't allow to allow socket communication with it.
*/
if (short_addr == IEEE802154_ADDR_SHORT_UNSPEC ||
short_addr == IEEE802154_ADDR_SHORT_BROADCAST)
return -EINVAL;
wpan_dev->short_addr = cpu_to_le16(short_addr);
return 0;
}
const struct cfg802154_ops mac802154_config_ops = {
.add_virtual_intf_deprecated = ieee802154_add_iface_deprecated,
.del_virtual_intf_deprecated = ieee802154_del_iface_deprecated,
.set_channel = ieee802154_set_channel,
.set_pan_id = ieee802154_set_pan_id,
.set_short_addr = ieee802154_set_short_addr,
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册