tools/bootconfig: Suppress non-error messages

Suppress non-error messages when applying new bootconfig
to initrd image. To enable it, replace printf for error
message with pr_err() macro.
This also adds a testcase for this fix.

Link: http://lkml.kernel.org/r/158125351377.16911.13283712972275131160.stgit@devnote2Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

tools/bootconfig/main.c

@@ -140,7 +140,7 @@ int load_xbc_from_initrd(int fd, char **buf)
 		return 0;
 
 	if (lseek(fd, -8, SEEK_END) < 0) {
-		printf("Failed to lseek: %d\n", -errno);
+		pr_err("Failed to lseek: %d\n", -errno);
 		return -errno;
 	}
 
@@ -155,7 +155,7 @@ int load_xbc_from_initrd(int fd, char **buf)
 		return 0;
 
 	if (lseek(fd, stat.st_size - 8 - size, SEEK_SET) < 0) {
-		printf("Failed to lseek: %d\n", -errno);
+		pr_err("Failed to lseek: %d\n", -errno);
 		return -errno;
 	}
 
@@ -166,7 +166,7 @@ int load_xbc_from_initrd(int fd, char **buf)
 	/* Wrong Checksum, maybe no boot config here */
 	rcsum = checksum((unsigned char *)*buf, size);
 	if (csum != rcsum) {
-		printf("checksum error: %d != %d\n", csum, rcsum);
+		pr_err("checksum error: %d != %d\n", csum, rcsum);
 		return 0;
 	}
 
@@ -185,13 +185,13 @@ int show_xbc(const char *path)
 
 	fd = open(path, O_RDONLY);
 	if (fd < 0) {
-		printf("Failed to open initrd %s: %d\n", path, fd);
+		pr_err("Failed to open initrd %s: %d\n", path, fd);
 		return -errno;
 	}
 
 	ret = load_xbc_from_initrd(fd, &buf);
 	if (ret < 0)
-		printf("Failed to load a boot config from initrd: %d\n", ret);
+		pr_err("Failed to load a boot config from initrd: %d\n", ret);
 	else
 		xbc_show_compact_tree();
 
@@ -209,7 +209,7 @@ int delete_xbc(const char *path)
 
 	fd = open(path, O_RDWR);
 	if (fd < 0) {
-		printf("Failed to open initrd %s: %d\n", path, fd);
+		pr_err("Failed to open initrd %s: %d\n", path, fd);
 		return -errno;
 	}
 
@@ -222,7 +222,7 @@ int delete_xbc(const char *path)
 	pr_output = 1;
 	if (size < 0) {
 		ret = size;
-		printf("Failed to load a boot config from initrd: %d\n", ret);
+		pr_err("Failed to load a boot config from initrd: %d\n", ret);
 	} else if (size > 0) {
 		ret = fstat(fd, &stat);
 		if (!ret)
@@ -245,7 +245,7 @@ int apply_xbc(const char *path, const char *xbc_path)
 
 	ret = load_xbc_file(xbc_path, &buf);
 	if (ret < 0) {
-		printf("Failed to load %s : %d\n", xbc_path, ret);
+		pr_err("Failed to load %s : %d\n", xbc_path, ret);
 		return ret;
 	}
 	size = strlen(buf) + 1;
@@ -262,7 +262,7 @@ int apply_xbc(const char *path, const char *xbc_path)
 	/* Check the data format */
 	ret = xbc_init(buf);
 	if (ret < 0) {
-		printf("Failed to parse %s: %d\n", xbc_path, ret);
+		pr_err("Failed to parse %s: %d\n", xbc_path, ret);
 		free(data);
 		free(buf);
 		return ret;
@@ -279,20 +279,20 @@ int apply_xbc(const char *path, const char *xbc_path)
 	/* Remove old boot config if exists */
 	ret = delete_xbc(path);
 	if (ret < 0) {
-		printf("Failed to delete previous boot config: %d\n", ret);
+		pr_err("Failed to delete previous boot config: %d\n", ret);
 		return ret;
 	}
 
 	/* Apply new one */
 	fd = open(path, O_RDWR | O_APPEND);
 	if (fd < 0) {
-		printf("Failed to open %s: %d\n", path, fd);
+		pr_err("Failed to open %s: %d\n", path, fd);
 		return fd;
 	}
 	/* TODO: Ensure the @path is initramfs/initrd image */
 	ret = write(fd, data, size + 8);
 	if (ret < 0) {
-		printf("Failed to apply a boot config: %d\n", ret);
+		pr_err("Failed to apply a boot config: %d\n", ret);
 		return ret;
 	}
 	close(fd);
@@ -334,12 +334,12 @@ int main(int argc, char **argv)
 	}
 
 	if (apply && delete) {
-		printf("Error: You can not specify both -a and -d at once.\n");
+		pr_err("Error: You can not specify both -a and -d at once.\n");
 		return usage();
 	}
 
 	if (optind >= argc) {
-		printf("Error: No initrd is specified.\n");
+		pr_err("Error: No initrd is specified.\n");
 		return usage();
 	}
 

tools/bootconfig/test-bootconfig.sh

@@ -64,6 +64,15 @@ echo "File size check"
 new_size=$(stat -c %s $INITRD)
 xpass test $new_size -eq $initrd_size
 
+echo "No error messge while applying"
+OUTFILE=`mktemp tempout-XXXX`
+dd if=/dev/zero of=$INITRD bs=4096 count=1
+printf " \0\0\0 \0\0\0" >> $INITRD
+$BOOTCONF -a $TEMPCONF $INITRD > $OUTFILE 2>&1
+xfail grep -i "failed" $OUTFILE
+xfail grep -i "error" $OUTFILE
+rm $OUTFILE
+
 echo "Max node number check"
 
 echo -n > $TEMPCONF