提交 96d7ca5e 编写于 作者: A Antti Palosaari 提交者: Mauro Carvalho Chehab

[media] dvb_usb_v2: rework USB streaming logic

Control flow order changed a little bit. HW PID filter is now
disabled also when streaming is stopped - earlier it was just
set only when streaming was started.
Control flow is now:
* set streaming status bit
* submit USB streaming packets
* enable HW PID filter
* ask device to start streaming
* N x add PID to device HW PID filter
... streaming video ...
* N x remove PID from device HW PID filter
* ask device to stop streaming
* disable HW PID filter
* kill USB streaming packets
* clear streaming status bit
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 61356eea
......@@ -260,135 +260,152 @@ static int wait_schedule(void *ptr)
return 0;
}
static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed,
int count)
static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
struct dvb_usb_device *d = adap_to_d(adap);
int ret;
dev_dbg(&d->udev->dev, "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d '%s'\n",
int ret = 0;
struct usb_data_stream_properties stream_props;
dev_dbg(&d->udev->dev,
"%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n",
__func__, adap->id, adap->active_fe, dvbdmxfeed->type,
adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid,
dvbdmxfeed->pid, dvbdmxfeed->index,
(count == 1) ? "on" : "off");
dvbdmxfeed->pid, dvbdmxfeed->index);
/* wait init is done */
wait_on_bit(&adap->state_bits, ADAP_INIT, wait_schedule,
TASK_UNINTERRUPTIBLE);
if (adap->active_fe == -1)
return -EINVAL;
adap->feed_count += count;
/* stop feeding if it is last pid */
if (adap->feed_count == 0) {
dev_dbg(&d->udev->dev, "%s: stop feeding\n", __func__);
if (d->props->streaming_ctrl) {
ret = d->props->streaming_ctrl(
adap->fe[adap->active_fe], 0);
if (ret < 0) {
dev_err(&d->udev->dev,
"%s: streaming_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
usb_urb_killv2(&adap->stream);
goto err_clear_wait;
}
}
usb_urb_killv2(&adap->stream);
/* skip feed setup if we are already feeding */
if (adap->feed_count++ > 0)
goto skip_feed_start;
clear_bit(ADAP_STREAMING, &adap->state_bits);
smp_mb__after_clear_bit();
wake_up_bit(&adap->state_bits, ADAP_STREAMING);
/* set 'streaming' status bit */
set_bit(ADAP_STREAMING, &adap->state_bits);
/* resolve input and output streaming parameters */
if (d->props->get_stream_config) {
memcpy(&stream_props, &adap->props->stream,
sizeof(struct usb_data_stream_properties));
ret = d->props->get_stream_config(adap->fe[adap->active_fe],
&adap->ts_type, &stream_props);
if (ret)
dev_err(&d->udev->dev,
"%s: get_stream_config() failed=%d\n",
KBUILD_MODNAME, ret);
} else {
stream_props = adap->props->stream;
}
switch (adap->ts_type) {
case DVB_USB_FE_TS_TYPE_204:
adap->stream.complete = dvb_usb_data_complete_204;
break;
case DVB_USB_FE_TS_TYPE_RAW:
adap->stream.complete = dvb_usb_data_complete_raw;
break;
case DVB_USB_FE_TS_TYPE_188:
default:
adap->stream.complete = dvb_usb_data_complete;
break;
}
/* submit USB streaming packets */
usb_urb_submitv2(&adap->stream, &stream_props);
/* enable HW PID filter */
if (adap->pid_filtering && adap->props->pid_filter_ctrl) {
ret = adap->props->pid_filter_ctrl(adap, 1);
if (ret)
dev_err(&d->udev->dev,
"%s: pid_filter_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
}
/* activate the pid on the device pid filter */
if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER &&
adap->pid_filtering && adap->props->pid_filter) {
/* ask device to start streaming */
if (d->props->streaming_ctrl) {
ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 1);
if (ret)
dev_err(&d->udev->dev,
"%s: streaming_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
}
skip_feed_start:
/* add PID to device HW PID filter */
if (adap->pid_filtering && adap->props->pid_filter) {
ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
dvbdmxfeed->pid, (count == 1) ? 1 : 0);
if (ret < 0)
dvbdmxfeed->pid, 1);
if (ret)
dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
KBUILD_MODNAME, ret);
}
/* start feeding if it is first pid */
if (adap->feed_count == 1 && count == 1) {
struct usb_data_stream_properties stream_props;
set_bit(ADAP_STREAMING, &adap->state_bits);
dev_dbg(&d->udev->dev, "%s: start feeding\n", __func__);
if (ret)
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
/* resolve input and output streaming paramters */
if (d->props->get_stream_config) {
memcpy(&stream_props, &adap->props->stream,
sizeof(struct usb_data_stream_properties));
ret = d->props->get_stream_config(
adap->fe[adap->active_fe],
&adap->ts_type, &stream_props);
if (ret < 0)
goto err_clear_wait;
} else {
stream_props = adap->props->stream;
}
static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
struct dvb_usb_device *d = adap_to_d(adap);
int ret = 0;
dev_dbg(&d->udev->dev,
"%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n",
__func__, adap->id, adap->active_fe, dvbdmxfeed->type,
adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid,
dvbdmxfeed->pid, dvbdmxfeed->index);
switch (adap->ts_type) {
case DVB_USB_FE_TS_TYPE_204:
adap->stream.complete = dvb_usb_data_complete_204;
break;
case DVB_USB_FE_TS_TYPE_RAW:
adap->stream.complete = dvb_usb_data_complete_raw;
break;
case DVB_USB_FE_TS_TYPE_188:
default:
adap->stream.complete = dvb_usb_data_complete;
break;
}
if (adap->active_fe == -1)
return -EINVAL;
usb_urb_submitv2(&adap->stream, &stream_props);
if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER &&
adap->props->caps &
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF &&
adap->props->pid_filter_ctrl) {
ret = adap->props->pid_filter_ctrl(adap,
adap->pid_filtering);
if (ret < 0) {
dev_err(&d->udev->dev,
"%s: pid_filter_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
goto err_clear_wait;
}
}
/* remove PID from device HW PID filter */
if (adap->pid_filtering && adap->props->pid_filter) {
ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
dvbdmxfeed->pid, 0);
if (ret)
dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
KBUILD_MODNAME, ret);
}
if (d->props->streaming_ctrl) {
ret = d->props->streaming_ctrl(
adap->fe[adap->active_fe], 1);
if (ret < 0) {
dev_err(&d->udev->dev,
"%s: streaming_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
goto err_clear_wait;
}
}
/* we cannot stop streaming until last PID is removed */
if (--adap->feed_count > 0)
goto skip_feed_stop;
/* ask device to stop streaming */
if (d->props->streaming_ctrl) {
ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 0);
if (ret)
dev_err(&d->udev->dev,
"%s: streaming_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
}
return 0;
err_clear_wait:
/* disable HW PID filter */
if (adap->pid_filtering && adap->props->pid_filter_ctrl) {
ret = adap->props->pid_filter_ctrl(adap, 0);
if (ret)
dev_err(&d->udev->dev,
"%s: pid_filter_ctrl() failed=%d\n",
KBUILD_MODNAME, ret);
}
/* kill USB streaming packets */
usb_urb_killv2(&adap->stream);
/* clear 'streaming' status bit */
clear_bit(ADAP_STREAMING, &adap->state_bits);
smp_mb__after_clear_bit();
wake_up_bit(&adap->state_bits, ADAP_STREAMING);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
return dvb_usb_ctrl_feed(dvbdmxfeed, 1);
}
skip_feed_stop:
static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
return dvb_usb_ctrl_feed(dvbdmxfeed, -1);
if (ret)
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册