提交 9697f1cd 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: dsa: propagate error code from dsa_slave_phy_setup

In case we cannot attach to our slave netdevice PHY, error out and
propagate that error up to the caller: dsa_slave_create().

Fixes: 0d8bcdd3 ("net: dsa: allow for more complex PHY setups")
Signed-off-by: NAndrey Volkov <andrey.volkov@nexvision.fr>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 53013c77
......@@ -512,7 +512,7 @@ static int dsa_slave_fixed_link_update(struct net_device *dev,
}
/* slave device setup *******************************************************/
static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
struct net_device *slave_dev)
{
struct dsa_switch *ds = p->parent;
......@@ -533,7 +533,7 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
ret = of_phy_register_fixed_link(port_dn);
if (ret) {
netdev_err(slave_dev, "failed to register fixed PHY\n");
return;
return ret;
}
phy_is_fixed = true;
phy_dn = port_dn;
......@@ -556,7 +556,7 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
if (!p->phy) {
p->phy = ds->slave_mii_bus->phy_map[p->port];
if (!p->phy)
return;
return -ENODEV;
phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
p->phy_interface);
......@@ -564,6 +564,8 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
netdev_info(slave_dev, "attached PHY at address %d [%s]\n",
p->phy->addr, p->phy->drv->name);
}
return 0;
}
int dsa_slave_suspend(struct net_device *slave_dev)
......@@ -656,12 +658,17 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent,
p->old_link = -1;
p->old_duplex = -1;
dsa_slave_phy_setup(p, slave_dev);
ret = dsa_slave_phy_setup(p, slave_dev);
if (ret) {
free_netdev(slave_dev);
return NULL;
}
ret = register_netdev(slave_dev);
if (ret) {
netdev_err(master, "error %d registering interface %s\n",
ret, slave_dev->name);
phy_disconnect(p->phy);
free_netdev(slave_dev);
return NULL;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册