wifi: rtw89: 8852be: add 8852BE PCI entry

8852BE has two variants with different ID. One is 10ec:b852 that is a main
model with 2x2 antenna, and the other is 10ec:b85b that is a 1x1 model.
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220928084336.34981-10-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/rtw8852b.h

@@ -85,4 +85,6 @@ struct rtw8852b_efuse {
 	};
 } __packed;
 
+extern const struct rtw89_chip_info rtw8852b_chip_info;
+
 #endif

drivers/net/wireless/realtek/rtw89/rtw8852be.c

@@ -7,18 +7,82 @@
 
 #include "pci.h"
 #include "reg.h"
+#include "rtw8852b.h"
 
 static const struct rtw89_pci_info rtw8852b_pci_info = {
+	.txbd_trunc_mode	= MAC_AX_BD_TRUNC,
+	.rxbd_trunc_mode	= MAC_AX_BD_TRUNC,
+	.rxbd_mode		= MAC_AX_RXBD_PKT,
+	.tag_mode		= MAC_AX_TAG_MULTI,
+	.tx_burst		= MAC_AX_TX_BURST_2048B,
+	.rx_burst		= MAC_AX_RX_BURST_128B,
+	.wd_dma_idle_intvl	= MAC_AX_WD_DMA_INTVL_256NS,
+	.wd_dma_act_intvl	= MAC_AX_WD_DMA_INTVL_256NS,
+	.multi_tag_num		= MAC_AX_TAG_NUM_8,
+	.lbc_en			= MAC_AX_PCIE_ENABLE,
+	.lbc_tmr		= MAC_AX_LBC_TMR_2MS,
+	.autok_en		= MAC_AX_PCIE_DISABLE,
+	.io_rcy_en		= MAC_AX_PCIE_DISABLE,
+	.io_rcy_tmr		= MAC_AX_IO_RCY_ANA_TMR_6MS,
+
+	.init_cfg_reg		= R_AX_PCIE_INIT_CFG1,
+	.txhci_en_bit		= B_AX_TXHCI_EN,
+	.rxhci_en_bit		= B_AX_RXHCI_EN,
+	.rxbd_mode_bit		= B_AX_RXBD_MODE,
+	.exp_ctrl_reg		= R_AX_PCIE_EXP_CTRL,
+	.max_tag_num_mask	= B_AX_MAX_TAG_NUM,
+	.rxbd_rwptr_clr_reg	= R_AX_RXBD_RWPTR_CLR,
+	.txbd_rwptr_clr2_reg	= 0,
 	.dma_stop1		= {R_AX_PCIE_DMA_STOP1, B_AX_TX_STOP1_MASK_V1},
 	.dma_stop2		= {0},
 	.dma_busy1		= {R_AX_PCIE_DMA_BUSY1, DMA_BUSY1_CHECK_V1},
 	.dma_busy2_reg		= 0,
 	.dma_busy3_reg		= R_AX_PCIE_DMA_BUSY1,
 
+	.rpwm_addr		= R_AX_PCIE_HRPWM,
+	.cpwm_addr		= R_AX_CPWM,
 	.tx_dma_ch_mask		= BIT(RTW89_TXCH_ACH4) | BIT(RTW89_TXCH_ACH5) |
 				  BIT(RTW89_TXCH_ACH6) | BIT(RTW89_TXCH_ACH7) |
 				  BIT(RTW89_TXCH_CH10) | BIT(RTW89_TXCH_CH11),
+	.bd_idx_addr_low_power	= NULL,
+	.dma_addr_set		= &rtw89_pci_ch_dma_addr_set,
+
+	.ltr_set		= rtw89_pci_ltr_set,
+	.fill_txaddr_info	= rtw89_pci_fill_txaddr_info,
+	.config_intr_mask	= rtw89_pci_config_intr_mask,
+	.enable_intr		= rtw89_pci_enable_intr,
+	.disable_intr		= rtw89_pci_disable_intr,
+	.recognize_intrs	= rtw89_pci_recognize_intrs,
+};
+
+static const struct rtw89_driver_info rtw89_8852be_info = {
+	.chip = &rtw8852b_chip_info,
+	.bus = {
+		.pci = &rtw8852b_pci_info,
+	},
+};
+
+static const struct pci_device_id rtw89_8852be_id_table[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xb852),
+		.driver_data = (kernel_ulong_t)&rtw89_8852be_info,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xb85b),
+		.driver_data = (kernel_ulong_t)&rtw89_8852be_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(pci, rtw89_8852be_id_table);
+
+static struct pci_driver rtw89_8852be_driver = {
+	.name		= "rtw89_8852be",
+	.id_table	= rtw89_8852be_id_table,
+	.probe		= rtw89_pci_probe,
+	.remove		= rtw89_pci_remove,
+	.driver.pm	= &rtw89_pm_ops,
 };
+module_pci_driver(rtw89_8852be_driver);
 
 MODULE_AUTHOR("Realtek Corporation");
 MODULE_DESCRIPTION("Realtek 802.11ax wireless 8852BE driver");