drivers: pinctrl: add driver for Allwinner A64 SoC

Based on the Allwinner A64 user manual and on the previous sunxi
pinctrl drivers this introduces the pin multiplex assignments for
the ARMv8 Allwinner A64 SoC.
Port A is apparently used for the fixed function DRAM controller, so
the ports start at B here (the manual mentions "n from 1 to 7", so
not starting at 0).
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt

@@ -22,6 +22,7 @@ Required properties:
   "allwinner,sun8i-a83t-pinctrl"
   "allwinner,sun8i-h3-pinctrl"
   "allwinner,sun8i-h3-r-pinctrl"
+  "allwinner,sun50i-a64-pinctrl"
 
 - reg: Should contain the register physical address and length for the
   pin controller.

drivers/pinctrl/sunxi/Kconfig

@@ -68,4 +68,8 @@ config PINCTRL_SUN9I_A80_R
 	depends on RESET_CONTROLLER
 	select PINCTRL_SUNXI
 
+config PINCTRL_SUN50I_A64
+	bool
+	select PINCTRL_SUNXI
+
 endif

drivers/pinctrl/sunxi/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_PINCTRL_SUN7I_A20)		+= pinctrl-sun7i-a20.o
 obj-$(CONFIG_PINCTRL_SUN8I_A23)		+= pinctrl-sun8i-a23.o
 obj-$(CONFIG_PINCTRL_SUN8I_A23_R)	+= pinctrl-sun8i-a23-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_A33)		+= pinctrl-sun8i-a33.o
+obj-$(CONFIG_PINCTRL_SUN50I_A64)	+= pinctrl-sun50i-a64.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T)	+= pinctrl-sun8i-a83t.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3_R)	+= pinctrl-sun8i-h3-r.o