提交 96651a07 编写于 作者: M Maxime Ripard 提交者: Daniel Lezcano

clocksource: sun4i: Factor out some timer code

The set_next_event and set_mode callbacks share a lot of common code we
can easily factor to avoid duplication and mistakes.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
上级 63d88f1a
......@@ -52,24 +52,46 @@ static void sun4i_clkevt_sync(void)
cpu_relax();
}
static void sun4i_clkevt_time_stop(u8 timer)
{
u32 val = readl(timer_base + TIMER_CTL_REG(timer));
writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
sun4i_clkevt_sync();
}
static void sun4i_clkevt_time_setup(u8 timer, unsigned long delay)
{
writel(delay, timer_base + TIMER_INTVAL_REG(timer));
}
static void sun4i_clkevt_time_start(u8 timer, bool periodic)
{
u32 val = readl(timer_base + TIMER_CTL_REG(timer));
if (periodic)
val &= ~TIMER_CTL_ONESHOT;
else
val |= TIMER_CTL_ONESHOT;
writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
}
static void sun4i_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
u32 u = readl(timer_base + TIMER_CTL_REG(0));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
u &= ~(TIMER_CTL_ONESHOT);
writel(u | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0));
sun4i_clkevt_time_stop(0);
sun4i_clkevt_time_start(0, true);
break;
case CLOCK_EVT_MODE_ONESHOT:
writel(u | TIMER_CTL_ONESHOT, timer_base + TIMER_CTL_REG(0));
sun4i_clkevt_time_stop(0);
sun4i_clkevt_time_start(0, false);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
writel(u & ~(TIMER_CTL_ENABLE), timer_base + TIMER_CTL_REG(0));
sun4i_clkevt_time_stop(0);
break;
}
}
......@@ -77,15 +99,9 @@ static void sun4i_clkevt_mode(enum clock_event_mode mode,
static int sun4i_clkevt_next_event(unsigned long evt,
struct clock_event_device *unused)
{
u32 val = readl(timer_base + TIMER_CTL_REG(0));
writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0));
sun4i_clkevt_sync();
writel(evt, timer_base + TIMER_INTVAL_REG(0));
val = readl(timer_base + TIMER_CTL_REG(0));
writel(val | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD,
timer_base + TIMER_CTL_REG(0));
sun4i_clkevt_time_stop(0);
sun4i_clkevt_time_setup(0, evt);
sun4i_clkevt_time_start(0, false);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册