提交 9637f30e 编写于 作者: T Tomasz Figa 提交者: Olof Johansson

ARM: EXYNOS: Fix core ID used by platsmp and hotplug code

When CPU topology is specified in device tree, cpu_logical_map() does
not return core ID anymore, but rather full MPIDR value. This breaks
existing calculation of PMU register offsets on Exynos SoCs.

This patch fixes the problem by adjusting the code to use only core ID
bits of the value returned by cpu_logical_map() to allow CPU topology to
be specified in device tree on Exynos SoCs.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>
上级 e5c6cac6
...@@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void) ...@@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious) static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{ {
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
for (;;) { for (;;) {
/* make cpu1 to be turned off at next WFI command */ /* Turn the CPU off on next WFI instruction. */
if (cpu == 1) exynos_cpu_power_down(core_id);
exynos_cpu_power_down(cpu);
wfi(); wfi();
if (pen_release == cpu_logical_map(cpu)) { if (pen_release == core_id) {
/* /*
* OK, proper wakeup, we're done * OK, proper wakeup, we're done
*/ */
......
...@@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu) ...@@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu)
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{ {
unsigned long timeout; unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu); u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
int ret = -ENOSYS; int ret = -ENOSYS;
/* /*
...@@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* the holding pen - release it, then wait for it to flag * the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release. * that it has been released by resetting pen_release.
* *
* Note that "pen_release" is the hardware CPU ID, whereas * Note that "pen_release" is the hardware CPU core ID, whereas
* "cpu" is Linux's internal ID. * "cpu" is Linux's internal ID.
*/ */
write_pen_release(phys_cpu); write_pen_release(core_id);
if (!exynos_cpu_power_state(cpu)) { if (!exynos_cpu_power_state(core_id)) {
exynos_cpu_power_up(cpu); exynos_cpu_power_up(core_id);
timeout = 10; timeout = 10;
/* wait max 10 ms until cpu1 is on */ /* wait max 10 ms until cpu1 is on */
while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) { while (exynos_cpu_power_state(core_id)
!= S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0) if (timeout-- == 0)
break; break;
...@@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Try to set boot address using firmware first * Try to set boot address using firmware first
* and fall back to boot register if it fails. * and fall back to boot register if it fails.
*/ */
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS) if (ret && ret != -ENOSYS)
goto fail; goto fail;
if (ret == -ENOSYS) { if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu); void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) { if (IS_ERR(boot_reg)) {
ret = PTR_ERR(boot_reg); ret = PTR_ERR(boot_reg);
goto fail; goto fail;
} }
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); __raw_writel(boot_addr, cpu_boot_reg(core_id));
} }
call_firmware_op(cpu_boot, phys_cpu); call_firmware_op(cpu_boot, core_id);
arch_send_wakeup_ipi_mask(cpumask_of(cpu)); arch_send_wakeup_ipi_mask(cpumask_of(cpu));
...@@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) ...@@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
* boot register if it fails. * boot register if it fails.
*/ */
for (i = 1; i < max_cpus; ++i) { for (i = 1; i < max_cpus; ++i) {
unsigned long phys_cpu;
unsigned long boot_addr; unsigned long boot_addr;
u32 mpidr;
u32 core_id;
int ret; int ret;
phys_cpu = cpu_logical_map(i); mpidr = cpu_logical_map(i);
core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup); boot_addr = virt_to_phys(exynos4_secondary_startup);
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS) if (ret && ret != -ENOSYS)
break; break;
if (ret == -ENOSYS) { if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu); void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) if (IS_ERR(boot_reg))
break; break;
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); __raw_writel(boot_addr, cpu_boot_reg(core_id));
} }
} }
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册