提交 952fa954 编写于 作者: R Rodolfo Giometti 提交者: Ralf Baechle

[MIPS] APM emu support

Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 aa9772e3
......@@ -1890,6 +1890,32 @@ config PM
bool "Power Management support (EXPERIMENTAL)"
depends on EXPERIMENTAL && SOC_AU1X00
config APM
tristate "Advanced Power Management Emulation"
depends on PM
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered systems with
APM compliant BIOSes. If you say Y here, the system time will be
reset after a RESUME operation, the /proc/apm device will provide
battery status information, and user-space programs will receive
notification of APM "events" (e.g. battery status change).
In order to use APM, you will need supporting software. For location
and more information, read <file:Documentation/pm.txt> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver does not spin down disk drives (see the hdparm(8)
manpage ("man 8 hdparm") for that), and it doesn't turn off
VESA-compliant "green" monitors.
Generally, if you don't have a battery in your machine, there isn't
much point in using this driver and you should say N. If you get
random kernel OOPSes or reboots that don't seem to be related to
anything, try disabling/enabling this option (or disabling/enabling
APM in your BIOS).
endmenu
source "net/Kconfig"
......
......@@ -13,6 +13,8 @@ binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o
......
/*
* bios-less APM driver for MIPS Linux
* Jamey Hicks <jamey@crl.dec.com>
* adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
*
* APM 1.2 Reference:
* Intel Corporation, Microsoft Corporation. Advanced Power Management
* (APM) BIOS Interface Specification, Revision 1.2, February 1996.
*
* [This document is available from Microsoft at:
* http://www.microsoft.com/hwdev/busbios/amp_12.htm]
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/miscdevice.h>
#include <linux/apm_bios.h>
#include <linux/capability.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <asm/apm.h> /* apm_power_info */
#include <asm/system.h>
/*
* The apm_bios device is one of the misc char devices.
* This is its minor number.
*/
#define APM_MINOR_DEV 134
/*
* See Documentation/Config.help for the configuration options.
*
* Various options can be changed at boot time as follows:
* (We allow underscores for compatibility with the modules code)
* apm=on/off enable/disable APM
*/
/*
* Maximum number of events stored
*/
#define APM_MAX_EVENTS 16
struct apm_queue {
unsigned int event_head;
unsigned int event_tail;
apm_event_t events[APM_MAX_EVENTS];
};
/*
* The per-file APM data
*/
struct apm_user {
struct list_head list;
unsigned int suser: 1;
unsigned int writer: 1;
unsigned int reader: 1;
int suspend_result;
unsigned int suspend_state;
#define SUSPEND_NONE 0 /* no suspend pending */
#define SUSPEND_PENDING 1 /* suspend pending read */
#define SUSPEND_READ 2 /* suspend read, pending ack */
#define SUSPEND_ACKED 3 /* suspend acked */
#define SUSPEND_DONE 4 /* suspend completed */
struct apm_queue queue;
};
/*
* Local variables
*/
static int suspends_pending;
static int apm_disabled;
static int mips_apm_active;
static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
/*
* This is a list of everyone who has opened /dev/apm_bios
*/
static DECLARE_RWSEM(user_list_lock);
static LIST_HEAD(apm_user_list);
/*
* kapmd info. kapmd provides us a process context to handle
* "APM" events within - specifically necessary if we're going
* to be suspending the system.
*/
static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
static DECLARE_COMPLETION(kapmd_exit);
static DEFINE_SPINLOCK(kapmd_queue_lock);
static struct apm_queue kapmd_queue;
static const char driver_version[] = "1.13"; /* no spaces */
/*
* Compatibility cruft until the IPAQ people move over to the new
* interface.
*/
static void __apm_get_power_status(struct apm_power_info *info)
{
}
/*
* This allows machines to provide their own "apm get power status" function.
*/
void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
EXPORT_SYMBOL(apm_get_power_status);
/*
* APM event queue management.
*/
static inline int queue_empty(struct apm_queue *q)
{
return q->event_head == q->event_tail;
}
static inline apm_event_t queue_get_event(struct apm_queue *q)
{
q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
return q->events[q->event_tail];
}
static void queue_add_event(struct apm_queue *q, apm_event_t event)
{
q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
if (q->event_head == q->event_tail) {
static int notified;
if (notified++ == 0)
printk(KERN_ERR "apm: an event queue overflowed\n");
q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
}
q->events[q->event_head] = event;
}
static void queue_event_one_user(struct apm_user *as, apm_event_t event)
{
if (as->suser && as->writer) {
switch (event) {
case APM_SYS_SUSPEND:
case APM_USER_SUSPEND:
/*
* If this user already has a suspend pending,
* don't queue another one.
*/
if (as->suspend_state != SUSPEND_NONE)
return;
as->suspend_state = SUSPEND_PENDING;
suspends_pending++;
break;
}
}
queue_add_event(&as->queue, event);
}
static void queue_event(apm_event_t event, struct apm_user *sender)
{
struct apm_user *as;
down_read(&user_list_lock);
list_for_each_entry(as, &apm_user_list, list) {
if (as != sender && as->reader)
queue_event_one_user(as, event);
}
up_read(&user_list_lock);
wake_up_interruptible(&apm_waitqueue);
}
static void apm_suspend(void)
{
struct apm_user *as;
int err = pm_suspend(PM_SUSPEND_MEM);
/*
* Anyone on the APM queues will think we're still suspended.
* Send a message so everyone knows we're now awake again.
*/
queue_event(APM_NORMAL_RESUME, NULL);
/*
* Finally, wake up anyone who is sleeping on the suspend.
*/
down_read(&user_list_lock);
list_for_each_entry(as, &apm_user_list, list) {
as->suspend_result = err;
as->suspend_state = SUSPEND_DONE;
}
up_read(&user_list_lock);
wake_up(&apm_suspend_waitqueue);
}
static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
{
struct apm_user *as = fp->private_data;
apm_event_t event;
int i = count, ret = 0;
if (count < sizeof(apm_event_t))
return -EINVAL;
if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
return -EAGAIN;
wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
event = queue_get_event(&as->queue);
ret = -EFAULT;
if (copy_to_user(buf, &event, sizeof(event)))
break;
if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
as->suspend_state = SUSPEND_READ;
buf += sizeof(event);
i -= sizeof(event);
}
if (i < count)
ret = count - i;
return ret;
}
static unsigned int apm_poll(struct file *fp, poll_table * wait)
{
struct apm_user *as = fp->private_data;
poll_wait(fp, &apm_waitqueue, wait);
return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
}
/*
* apm_ioctl - handle APM ioctl
*
* APM_IOC_SUSPEND
* This IOCTL is overloaded, and performs two functions. It is used to:
* - initiate a suspend
* - acknowledge a suspend read from /dev/apm_bios.
* Only when everyone who has opened /dev/apm_bios with write permission
* has acknowledge does the actual suspend happen.
*/
static int
apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
{
struct apm_user *as = filp->private_data;
unsigned long flags;
int err = -EINVAL;
if (!as->suser || !as->writer)
return -EPERM;
switch (cmd) {
case APM_IOC_SUSPEND:
as->suspend_result = -EINTR;
if (as->suspend_state == SUSPEND_READ) {
/*
* If we read a suspend command from /dev/apm_bios,
* then the corresponding APM_IOC_SUSPEND ioctl is
* interpreted as an acknowledge.
*/
as->suspend_state = SUSPEND_ACKED;
suspends_pending--;
} else {
/*
* Otherwise it is a request to suspend the system.
* Queue an event for all readers, and expect an
* acknowledge from all writers who haven't already
* acknowledged.
*/
queue_event(APM_USER_SUSPEND, as);
}
/*
* If there are no further acknowledges required, suspend
* the system.
*/
if (suspends_pending == 0)
apm_suspend();
/*
* Wait for the suspend/resume to complete. If there are
* pending acknowledges, we wait here for them.
*
* Note that we need to ensure that the PM subsystem does
* not kick us out of the wait when it suspends the threads.
*/
flags = current->flags;
current->flags |= PF_NOFREEZE;
/*
* Note: do not allow a thread which is acking the suspend
* to escape until the resume is complete.
*/
if (as->suspend_state == SUSPEND_ACKED)
wait_event(apm_suspend_waitqueue,
as->suspend_state == SUSPEND_DONE);
else
wait_event_interruptible(apm_suspend_waitqueue,
as->suspend_state == SUSPEND_DONE);
current->flags = flags;
err = as->suspend_result;
as->suspend_state = SUSPEND_NONE;
break;
}
return err;
}
static int apm_release(struct inode * inode, struct file * filp)
{
struct apm_user *as = filp->private_data;
filp->private_data = NULL;
down_write(&user_list_lock);
list_del(&as->list);
up_write(&user_list_lock);
/*
* We are now unhooked from the chain. As far as new
* events are concerned, we no longer exist. However, we
* need to balance suspends_pending, which means the
* possibility of sleeping.
*/
if (as->suspend_state != SUSPEND_NONE) {
suspends_pending -= 1;
if (suspends_pending == 0)
apm_suspend();
}
kfree(as);
return 0;
}
static int apm_open(struct inode * inode, struct file * filp)
{
struct apm_user *as;
as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
if (as) {
/*
* XXX - this is a tiny bit broken, when we consider BSD
* process accounting. If the device is opened by root, we
* instantly flag that we used superuser privs. Who knows,
* we might close the device immediately without doing a
* privileged operation -- cevans
*/
as->suser = capable(CAP_SYS_ADMIN);
as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
down_write(&user_list_lock);
list_add(&as->list, &apm_user_list);
up_write(&user_list_lock);
filp->private_data = as;
}
return as ? 0 : -ENOMEM;
}
static struct file_operations apm_bios_fops = {
.owner = THIS_MODULE,
.read = apm_read,
.poll = apm_poll,
.ioctl = apm_ioctl,
.open = apm_open,
.release = apm_release,
};
static struct miscdevice apm_device = {
.minor = APM_MINOR_DEV,
.name = "apm_bios",
.fops = &apm_bios_fops
};
#ifdef CONFIG_PROC_FS
/*
* Arguments, with symbols from linux/apm_bios.h.
*
* 0) Linux driver version (this will change if format changes)
* 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
* 2) APM flags from APM Installation Check (0x00):
* bit 0: APM_16_BIT_SUPPORT
* bit 1: APM_32_BIT_SUPPORT
* bit 2: APM_IDLE_SLOWS_CLOCK
* bit 3: APM_BIOS_DISABLED
* bit 4: APM_BIOS_DISENGAGED
* 3) AC line status
* 0x00: Off-line
* 0x01: On-line
* 0x02: On backup power (BIOS >= 1.1 only)
* 0xff: Unknown
* 4) Battery status
* 0x00: High
* 0x01: Low
* 0x02: Critical
* 0x03: Charging
* 0x04: Selected battery not present (BIOS >= 1.2 only)
* 0xff: Unknown
* 5) Battery flag
* bit 0: High
* bit 1: Low
* bit 2: Critical
* bit 3: Charging
* bit 7: No system battery
* 0xff: Unknown
* 6) Remaining battery life (percentage of charge):
* 0-100: valid
* -1: Unknown
* 7) Remaining battery life (time units):
* Number of remaining minutes or seconds
* -1: Unknown
* 8) min = minutes; sec = seconds
*/
static int apm_get_info(char *buf, char **start, off_t fpos, int length)
{
struct apm_power_info info;
char *units;
int ret;
info.ac_line_status = 0xff;
info.battery_status = 0xff;
info.battery_flag = 0xff;
info.battery_life = -1;
info.time = -1;
info.units = -1;
if (apm_get_power_status)
apm_get_power_status(&info);
switch (info.units) {
default: units = "?"; break;
case 0: units = "min"; break;
case 1: units = "sec"; break;
}
ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
driver_version, APM_32_BIT_SUPPORT,
info.ac_line_status, info.battery_status,
info.battery_flag, info.battery_life,
info.time, units);
return ret;
}
#endif
static int kapmd(void *arg)
{
daemonize("kapmd");
current->flags |= PF_NOFREEZE;
do {
apm_event_t event;
wait_event_interruptible(kapmd_wait,
!queue_empty(&kapmd_queue) || !mips_apm_active);
if (!mips_apm_active)
break;
spin_lock_irq(&kapmd_queue_lock);
event = 0;
if (!queue_empty(&kapmd_queue))
event = queue_get_event(&kapmd_queue);
spin_unlock_irq(&kapmd_queue_lock);
switch (event) {
case 0:
break;
case APM_LOW_BATTERY:
case APM_POWER_STATUS_CHANGE:
queue_event(event, NULL);
break;
case APM_USER_SUSPEND:
case APM_SYS_SUSPEND:
queue_event(event, NULL);
if (suspends_pending == 0)
apm_suspend();
break;
case APM_CRITICAL_SUSPEND:
apm_suspend();
break;
}
} while (1);
complete_and_exit(&kapmd_exit, 0);
}
static int __init apm_init(void)
{
int ret;
if (apm_disabled) {
printk(KERN_NOTICE "apm: disabled on user request.\n");
return -ENODEV;
}
mips_apm_active = 1;
ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
if (ret < 0) {
mips_apm_active = 0;
return ret;
}
#ifdef CONFIG_PROC_FS
create_proc_info_entry("apm", 0, NULL, apm_get_info);
#endif
ret = misc_register(&apm_device);
if (ret != 0) {
remove_proc_entry("apm", NULL);
mips_apm_active = 0;
wake_up(&kapmd_wait);
wait_for_completion(&kapmd_exit);
}
return ret;
}
static void __exit apm_exit(void)
{
misc_deregister(&apm_device);
remove_proc_entry("apm", NULL);
mips_apm_active = 0;
wake_up(&kapmd_wait);
wait_for_completion(&kapmd_exit);
}
module_init(apm_init);
module_exit(apm_exit);
MODULE_AUTHOR("Stephen Rothwell");
MODULE_DESCRIPTION("Advanced Power Management");
MODULE_LICENSE("GPL");
#ifndef MODULE
static int __init apm_setup(char *str)
{
while ((str != NULL) && (*str != '\0')) {
if (strncmp(str, "off", 3) == 0)
apm_disabled = 1;
if (strncmp(str, "on", 2) == 0)
apm_disabled = 0;
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");
}
return 1;
}
__setup("apm=", apm_setup);
#endif
/**
* apm_queue_event - queue an APM event for kapmd
* @event: APM event
*
* Queue an APM event for kapmd to process and ultimately take the
* appropriate action. Only a subset of events are handled:
* %APM_LOW_BATTERY
* %APM_POWER_STATUS_CHANGE
* %APM_USER_SUSPEND
* %APM_SYS_SUSPEND
* %APM_CRITICAL_SUSPEND
*/
void apm_queue_event(apm_event_t event)
{
unsigned long flags;
spin_lock_irqsave(&kapmd_queue_lock, flags);
queue_add_event(&kapmd_queue, event);
spin_unlock_irqrestore(&kapmd_queue_lock, flags);
wake_up_interruptible(&kapmd_wait);
}
EXPORT_SYMBOL(apm_queue_event);
/* -*- linux-c -*-
*
* (C) 2003 zecke@handhelds.org
*
* GPL version 2
*
* based on arch/arm/kernel/apm.c
* factor out the information needed by architectures to provide
* apm status
*
*
*/
#ifndef MIPS_ASM_SA1100_APM_H
#define MIPS_ASM_SA1100_APM_H
#include <linux/config.h>
#include <linux/apm_bios.h>
/*
* This structure gets filled in by the machine specific 'get_power_status'
* implementation. Any fields which are not set default to a safe value.
*/
struct apm_power_info {
unsigned char ac_line_status;
#define APM_AC_OFFLINE 0
#define APM_AC_ONLINE 1
#define APM_AC_BACKUP 2
#define APM_AC_UNKNOWN 0xff
unsigned char battery_status;
#define APM_BATTERY_STATUS_HIGH 0
#define APM_BATTERY_STATUS_LOW 1
#define APM_BATTERY_STATUS_CRITICAL 2
#define APM_BATTERY_STATUS_CHARGING 3
#define APM_BATTERY_STATUS_NOT_PRESENT 4
#define APM_BATTERY_STATUS_UNKNOWN 0xff
unsigned char battery_flag;
#define APM_BATTERY_FLAG_HIGH (1 << 0)
#define APM_BATTERY_FLAG_LOW (1 << 1)
#define APM_BATTERY_FLAG_CRITICAL (1 << 2)
#define APM_BATTERY_FLAG_CHARGING (1 << 3)
#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7)
#define APM_BATTERY_FLAG_UNKNOWN 0xff
int battery_life;
int time;
int units;
#define APM_UNITS_MINS 0
#define APM_UNITS_SECS 1
#define APM_UNITS_UNKNOWN -1
};
/*
* This allows machines to provide their own "apm get power status" function.
*/
extern void (*apm_get_power_status)(struct apm_power_info *);
/*
* Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND)
*/
void apm_queue_event(apm_event_t event);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册