提交 95283563 编写于 作者: Y Yoichi Yuasa 提交者: Ralf Baechle

[MIPS] MTX-1 flash partition setup move to platform devices registration

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-By: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 7b226094
......@@ -24,6 +24,9 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <mtd/mtd-abi.h>
static struct gpio_keys_button mtx1_gpio_button[] = {
{
......@@ -85,10 +88,56 @@ static struct platform_device mtx1_gpio_leds = {
}
};
static struct mtd_partition mtx1_mtd_partitions[] = {
{
.name = "filesystem",
.size = 0x01C00000,
.offset = 0,
},
{
.name = "yamon",
.size = 0x00100000,
.offset = MTDPART_OFS_APPEND,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel",
.size = 0x002c0000,
.offset = MTDPART_OFS_APPEND,
},
{
.name = "yamon env",
.size = 0x00040000,
.offset = MTDPART_OFS_APPEND,
},
};
static struct physmap_flash_data mtx1_flash_data = {
.width = 4,
.nr_parts = 4,
.parts = mtx1_mtd_partitions,
};
static struct resource mtx1_mtd_resource = {
.start = 0x1e000000,
.end = 0x1fffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device mtx1_mtd = {
.name = "physmap-flash",
.dev = {
.platform_data = &mtx1_flash_data,
},
.num_resources = 1,
.resource = &mtx1_mtd_resource,
};
static struct __initdata platform_device * mtx1_devs[] = {
&mtx1_gpio_leds,
&mtx1_wdt,
&mtx1_button
&mtx1_button,
&mtx1_mtd,
};
static int __init mtx1_register_devices(void)
......
......@@ -258,13 +258,6 @@ config MTD_ALCHEMY
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
config MTD_MTX1
tristate "4G Systems MTX-1 Flash device"
depends on MIPS_MTX1 && MTD_CFI
help
Flash memory access on 4G Systems MTX-1 Board. If you have one of
these boards and would like to use the flash chips on it, say 'Y'.
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
......
......@@ -65,5 +65,4 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o
obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
/*
* Flash memory access on 4G Systems MTX-1 boards
*
* $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $
*
* (C) 2005 Bruno Randolf <bruno.randolf@4g-systems.biz>
* (C) 2005 Joern Engel <joern@wohnheim.fh-wedel.de>
*
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
static struct map_info mtx1_map = {
.name = "MTX-1 flash",
.bankwidth = 4,
.size = 0x2000000,
.phys = 0x1E000000,
};
static struct mtd_partition mtx1_partitions[] = {
{
.name = "filesystem",
.size = 0x01C00000,
.offset = 0,
},{
.name = "yamon",
.size = 0x00100000,
.offset = MTDPART_OFS_APPEND,
.mask_flags = MTD_WRITEABLE,
},{
.name = "kernel",
.size = 0x002c0000,
.offset = MTDPART_OFS_APPEND,
},{
.name = "yamon env",
.size = 0x00040000,
.offset = MTDPART_OFS_APPEND,
}
};
static struct mtd_info *mtx1_mtd;
int __init mtx1_mtd_init(void)
{
int ret = -ENXIO;
simple_map_init(&mtx1_map);
mtx1_map.virt = ioremap(mtx1_map.phys, mtx1_map.size);
if (!mtx1_map.virt)
return -EIO;
mtx1_mtd = do_map_probe("cfi_probe", &mtx1_map);
if (!mtx1_mtd)
goto err;
mtx1_mtd->owner = THIS_MODULE;
ret = add_mtd_partitions(mtx1_mtd, mtx1_partitions,
ARRAY_SIZE(mtx1_partitions));
if (ret)
goto err;
return 0;
err:
iounmap(mtx1_map.virt);
return ret;
}
static void __exit mtx1_mtd_cleanup(void)
{
if (mtx1_mtd) {
del_mtd_partitions(mtx1_mtd);
map_destroy(mtx1_mtd);
}
if (mtx1_map.virt)
iounmap(mtx1_map.virt);
}
module_init(mtx1_mtd_init);
module_exit(mtx1_mtd_cleanup);
MODULE_AUTHOR("Bruno Randolf <bruno.randolf@4g-systems.biz>");
MODULE_DESCRIPTION("MTX-1 flash map");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册