bnx2x: Separated FW from the source.

>From now on FW will be downloaded from the binary file using request_firmware.

There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).

File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.

Each binary file has a header in the following format:


struct bnx2x_fw_file_section {
	__be32 len;
	__be32 offset;
}

struct bnx2x_fw_file_hdr {
	struct bnx2x_fw_file_section init_ops;
	struct bnx2x_fw_file_section init_ops_offsets;
	struct bnx2x_fw_file_section init_data;
	struct bnx2x_fw_file_section tsem_int_table_data;
	struct bnx2x_fw_file_section tsem_pram_data;
	struct bnx2x_fw_file_section usem_int_table_data;
	struct bnx2x_fw_file_section usem_pram_data;
	struct bnx2x_fw_file_section csem_int_table_data;
	struct bnx2x_fw_file_section csem_pram_data;
	struct bnx2x_fw_file_section xsem_int_table_data;
	struct bnx2x_fw_file_section xsem_pram_data;
	struct bnx2x_fw_file_section fw_version;
}

Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.

Data types of arrays:

init_data            __be32
init_ops_offsets     __be16
XXsem_pram_data         u8
XXsem_int_table_data    u8
init_ops             struct raw_op {
                          u8   op;
			__be24 offset;
                        __be32 data;
		     }
fw_version              u8

>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index 
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:

#define BLOCK_OPS_IDX(block, stage, end) \
       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))

Security:

In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/Kconfig

@@ -2676,6 +2676,7 @@ config TEHUTI
 config BNX2X
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
+	select FW_LOADER
 	select ZLIB_INFLATE
 	select LIBCRC32C
 	help

drivers/net/bnx2x.h

@@ -965,6 +965,21 @@ struct bnx2x {
 	int			gunzip_outlen;
 #define FW_BUF_SIZE			0x8000
 
+	struct raw_op          *init_ops;
+	/* Init blocks offsets inside init_ops */
+	u16                    *init_ops_offsets;
+	/* Data blob - has 32 bit granularity */
+	u32                    *init_data;
+	/* Zipped PRAM blobs - raw data */
+	const u8               *tsem_int_table_data;
+	const u8               *tsem_pram_data;
+	const u8               *usem_int_table_data;
+	const u8               *usem_pram_data;
+	const u8               *xsem_int_table_data;
+	const u8               *xsem_pram_data;
+	const u8               *csem_int_table_data;
+	const u8               *csem_pram_data;
+        const struct firmware  *firmware;
 };
 
 

drivers/net/bnx2x_fw_file_hdr.h

+/* bnx2x_fw_file_hdr.h: FW binary file header structure.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ * Based on the original idea of John Wright <john.wright@hp.com>.
+ */
+
+#ifndef BNX2X_INIT_FILE_HDR_H
+#define BNX2X_INIT_FILE_HDR_H
+
+struct bnx2x_fw_file_section {
+	__be32 len;
+	__be32 offset;
+};
+
+struct bnx2x_fw_file_hdr {
+	struct bnx2x_fw_file_section init_ops;
+	struct bnx2x_fw_file_section init_ops_offsets;
+	struct bnx2x_fw_file_section init_data;
+	struct bnx2x_fw_file_section tsem_int_table_data;
+	struct bnx2x_fw_file_section tsem_pram_data;
+	struct bnx2x_fw_file_section usem_int_table_data;
+	struct bnx2x_fw_file_section usem_pram_data;
+	struct bnx2x_fw_file_section csem_int_table_data;
+	struct bnx2x_fw_file_section csem_pram_data;
+	struct bnx2x_fw_file_section xsem_int_table_data;
+	struct bnx2x_fw_file_section xsem_pram_data;
+	struct bnx2x_fw_file_section fw_version;
+};
+
+#endif /* BNX2X_INIT_FILE_HDR_H */

drivers/net/bnx2x_init_ops.h

+/* bnx2x_init_ops.h: Broadcom Everest network driver.
+ *               Static functions needed during the initialization.
+ *               This file is "included" in bnx2x_main.c.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ */
+#ifndef BNX2X_INIT_OPS_H
+#define BNX2X_INIT_OPS_H
+
+static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
+
+static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u32 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u16 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR_IND(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+{
+	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
+	u32 buf_len32 = buf_len / 4;
+	int i;
+
+	memset(bp->gunzip_buf, fill, buf_len);
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len64)
+{
+	u32 buf_len32 = FW_BUF_SIZE / 4;
+	u32 len = len64 * 2;
+	u64 data64 = 0;
+	int i;
+
+	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
+	data64 = HILO_U64((*(data + 1)), (*data));
+	len64 = min((u32)(FW_BUF_SIZE/8), len64);
+	for (i = 0; i < len64; i++) {
+		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
+
+		*pdata = data64;
+	}
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+/*********************************************************
+   There are different blobs for each PRAM section.
+   In addition, each blob write operation is divided into a few operations
+   in order to decrease the amount of phys. contiguous buffer needed.
+   Thus, when we select a blob the address may be with some offset
+   from the beginning of PRAM section.
+   The same holds for the INT_TABLE sections.
+**********************************************************/
+#define IF_IS_INT_TABLE_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
+
+#define IF_IS_PRAM_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
+
+static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data)
+{
+	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
+		data = bp->tsem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
+		data = bp->csem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
+		data = bp->usem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
+		data = bp->xsem_int_table_data;
+	else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
+		data = bp->tsem_pram_data;
+	else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
+		data = bp->csem_pram_data;
+	else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
+		data = bp->usem_pram_data;
+	else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
+		data = bp->xsem_pram_data;
+
+	return data;
+}
+
+static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len)
+{
+	/* This is needed for NO_ZIP mode, currently supported
+	   in little endian mode only */
+	data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data);
+
+	if ((len * 4) > FW_BUF_SIZE) {
+		BNX2X_ERR("LARGE DMAE OPERATION ! "
+			  "addr 0x%x  len 0x%x\n", addr, len*4);
+		return;
+	}
+	memcpy(bp->gunzip_buf, data, len * 4);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr,
+			     u32 len, u32 blob_off)
+{
+	int rc, i;
+        const u8 *data = NULL;
+
+	data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off;
+
+	if (data == NULL) {
+		panic("Blob not found for addr 0x%x\n", addr);
+		return;
+	}
+
+	rc = bnx2x_gunzip(bp, data, len);
+	if (rc) {
+		BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc);
+		BNX2X_ERR("blob_offset=0x%x\n", blob_off);
+		return;
+	}
+
+	/* gunzip_outlen is in dwords */
+	len = bp->gunzip_outlen;
+	for (i = 0; i < len; i++)
+		((u32 *)bp->gunzip_buf)[i] =
+			cpu_to_le32(((u32 *)bp->gunzip_buf)[i]);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage)
+{
+	int hw_wr, i;
+	u16 op_start =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)];
+	u16 op_end =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)];
+	union init_op *op;
+	u32 op_type, addr, len;
+	const u32 *data, *data_base;
+
+	/* If empty block */
+	if (op_start == op_end)
+		return;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		hw_wr = OP_WR_FPGA;
+	else if (CHIP_REV_IS_EMUL(bp))
+		hw_wr = OP_WR_EMUL;
+	else
+		hw_wr = OP_WR_ASIC;
+
+	data_base = bp->init_data;
+
+	for (i = op_start; i < op_end; i++) {
+
+		op = (union init_op *)&(bp->init_ops[i]);
+
+		op_type = op->str_wr.op;
+		addr = op->str_wr.offset;
+		len = op->str_wr.data_len;
+		data = data_base + op->str_wr.data_off;
+
+		/* HW/EMUL specific */
+		if (unlikely((op_type > OP_WB) && (op_type == hw_wr)))
+			op_type = OP_WR;
+
+		switch (op_type) {
+		case OP_RD:
+			REG_RD(bp, addr);
+			break;
+		case OP_WR:
+			REG_WR(bp, addr, op->write.val);
+			break;
+		case OP_SW:
+			bnx2x_init_str_wr(bp, addr, data, len);
+			break;
+		case OP_WB:
+			bnx2x_init_wr_wb(bp, addr, data, len);
+			break;
+		case OP_SI:
+			bnx2x_init_ind_wr(bp, addr, data, len);
+			break;
+		case OP_ZR:
+			bnx2x_init_fill(bp, addr, 0, op->zero.len);
+			break;
+		case OP_ZP:
+			bnx2x_init_wr_zp(bp, addr, len,
+					 op->str_wr.data_off);
+			break;
+		case OP_WR_64:
+			bnx2x_init_wr_64(bp, addr, data, len);
+			break;
+		default:
+			/* happens whenever an op is of a diff HW */
+#if 0
+			DP(NETIF_MSG_HW, "skipping init operation  "
+			   "index %d[%d:%d]: type %d  addr 0x%x  "
+			   "len %d(0x%x)\n",
+			   i, op_start, op_end, op_type, addr, len, len);
+#endif
+			break;
+		}
+	}
+}
+
+/* PXP */
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+	u16 devctl;
+	int r_order, w_order;
+	u32 val, i;
+
+	pci_read_config_word(bp->pdev,
+			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+	if (bp->mrrs == -1)
+		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+	else {
+		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+		r_order = bp->mrrs;
+	}
+
+	if (r_order > MAX_RD_ORD) {
+		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
+		   r_order, MAX_RD_ORD);
+		r_order = MAX_RD_ORD;
+	}
+	if (w_order > MAX_WR_ORD) {
+		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
+		   w_order, MAX_WR_ORD);
+		w_order = MAX_WR_ORD;
+	}
+	if (CHIP_REV_IS_FPGA(bp)) {
+		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
+		w_order = 0;
+	}
+	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
+
+	for (i = 0; i < NUM_RD_Q-1; i++) {
+		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
+		REG_WR(bp, read_arb_addr[i].add,
+		       read_arb_data[i][r_order].add);
+		REG_WR(bp, read_arb_addr[i].ubound,
+		       read_arb_data[i][r_order].ubound);
+	}
+
+	for (i = 0; i < NUM_WR_Q-1; i++) {
+		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
+		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
+
+			REG_WR(bp, write_arb_addr[i].l,
+			       write_arb_data[i][w_order].l);
+
+			REG_WR(bp, write_arb_addr[i].add,
+			       write_arb_data[i][w_order].add);
+
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       write_arb_data[i][w_order].ubound);
+		} else {
+
+			val = REG_RD(bp, write_arb_addr[i].l);
+			REG_WR(bp, write_arb_addr[i].l,
+			       val | (write_arb_data[i][w_order].l << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].add);
+			REG_WR(bp, write_arb_addr[i].add,
+			       val | (write_arb_data[i][w_order].add << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].ubound);
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       val | (write_arb_data[i][w_order].ubound << 7));
+		}
+	}
+
+	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
+	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
+	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
+
+	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
+	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
+	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
+
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
+
+	if (r_order == MAX_RD_ORD)
+		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
+
+	if (CHIP_IS_E1H(bp)) {
+		val = ((w_order == 0) ? 2 : 3);
+		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
+		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
+	}
+}
+
+/*****************************************************************************
+ * Description:
+ *         Calculates crc 8 on a word value: polynomial 0-1-2-8
+ *         Code was translated from Verilog.
+ ****************************************************************************/
+static u8 calc_crc8(u32 data, u8 crc)
+{
+	u8 D[32];
+	u8 NewCRC[8];
+	u8 C[8];
+	u8 crc_res;
+	u8 i;
+
+	/* split the data into 31 bits */
+	for (i = 0; i < 32; i++) {
+		D[i] = data & 1;
+		data = data >> 1;
+	}
+
+	/* split the crc into 8 bits */
+	for (i = 0; i < 8; i++) {
+		C[i] = crc & 1;
+		crc = crc >> 1;
+	}
+
+	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+		C[6] ^ C[7];
+	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
+	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+		C[0] ^ C[1] ^ C[4] ^ C[5];
+	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+		C[1] ^ C[2] ^ C[5] ^ C[6];
+	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+		C[3] ^ C[4] ^ C[7];
+	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+		C[5];
+	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+		C[6];
+
+	crc_res = 0;
+	for (i = 0; i < 8; i++)
+		crc_res |= (NewCRC[i] << i);
+
+	return crc_res;
+}
+
+#endif /* BNX2X_INIT_OPS_H */

firmware/Makefile

@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
 			     bnx2/bnx2-rv2p-09-4.6.15.fw \
 			     bnx2/bnx2-mips-06-4.6.16.fw \

firmware/WHENCE

@@ -614,6 +614,26 @@ File: myricom/lanai.bin
 
 Licence: Unknown
 
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
+Driver: bnx2x: Broadcom Everest
+
+File: bnx2x-e1-4.8.53.0.fw.ihex
+File: bnx2x-e1h-4.8.53.0.fw.ihex
+
+License:
+  Copyright (c) 2007-2009 Broadcom Corporation
+
+  This file contains firmware data derived from proprietary unpublished
+  source code, Copyright (c) 2007-2009 Broadcom Corporation.
+
+  Permission is hereby granted for the distribution of this firmware data
+  in hexadecimal or equivalent format, provided this copyright notice is
+  accompanying it.
+
+
 Found in hex form in kernel source.
 
 --------------------------------------------------------------------------