ath9k: Check allowed PCIE powersave configuration

When assigning the initvals for PCIE sleep/awake
registers, check the configuration that has been
assigned to pll_pwrsave during initialization. Also,
display a warning if we don't have valid arrays.
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath9k/ar9003_hw.c

@@ -231,10 +231,20 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 			       ar9462_2p1_modes_fast_clock);
 		INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
 			       ar9462_2p1_baseband_core_txfir_coeff_japan_2484);
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			       ar9462_2p1_pciephy_clkreq_disable_L1);
-		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-			       ar9462_2p1_pciephy_clkreq_disable_L1);
+
+		/* Awake -> Sleep Setting */
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D3)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdes,
+				       ar9462_2p1_pciephy_clkreq_disable_L1);
+		}
+
+		/* Sleep -> Awake Setting */
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D0)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+				       ar9462_2p1_pciephy_clkreq_disable_L1);
+		}
 	} else if (AR_SREV_9462_20(ah)) {
 
 		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], ar9462_2p0_mac_core);
@@ -262,11 +272,18 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 				ar9462_2p0_common_rx_gain);
 
 		/* Awake -> Sleep Setting */
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			       ar9462_2p0_pciephy_clkreq_disable_L1);
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D3)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdes,
+				       ar9462_2p0_pciephy_clkreq_disable_L1);
+		}
+
 		/* Sleep -> Awake Setting */
-		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-			       ar9462_2p0_pciephy_clkreq_disable_L1);
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D0)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+				       ar9462_2p0_pciephy_clkreq_disable_L1);
+		}
 
 		/* Fast clock modal settings */
 		INIT_INI_ARRAY(&ah->iniModesFastClock,
@@ -456,10 +473,19 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 		INIT_INI_ARRAY(&ah->iniModesTxGain,
 			       ar9565_1p1_Modes_lowest_ob_db_tx_gain_table);
 
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			       ar9565_1p1_pciephy_clkreq_disable_L1);
-		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-			       ar9565_1p1_pciephy_clkreq_disable_L1);
+		/* Awake -> Sleep Setting */
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D3)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdes,
+				       ar9565_1p1_pciephy_clkreq_disable_L1);
+		}
+
+		/* Sleep -> Awake Setting */
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D0)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+				       ar9565_1p1_pciephy_clkreq_disable_L1);
+		}
 
 		INIT_INI_ARRAY(&ah->iniModesFastClock,
 				ar9565_1p1_modes_fast_clock);
@@ -491,10 +517,19 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 		INIT_INI_ARRAY(&ah->iniModesTxGain,
 			       ar9565_1p0_Modes_lowest_ob_db_tx_gain_table);
 
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			       ar9565_1p0_pciephy_clkreq_disable_L1);
-		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-			       ar9565_1p0_pciephy_clkreq_disable_L1);
+		/* Awake -> Sleep Setting */
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D3)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdes,
+				       ar9565_1p0_pciephy_clkreq_disable_L1);
+		}
+
+		/* Sleep -> Awake Setting */
+		if ((ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) &&
+		    (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_ON_D0)) {
+			INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+				       ar9565_1p0_pciephy_clkreq_disable_L1);
+		}
 
 		INIT_INI_ARRAY(&ah->iniModesFastClock,
 				ar9565_1p0_modes_fast_clock);
@@ -1130,6 +1165,12 @@ void ar9003_hw_attach_ops(struct ath_hw *ah)
 	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
 
 	ar9003_hw_init_mode_regs(ah);
+
+	if (AR_SREV_9003_PCOEM(ah)) {
+		WARN_ON(!ah->iniPcieSerdes.ia_array);
+		WARN_ON(!ah->iniPcieSerdesLowPower.ia_array);
+	}
+
 	priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs;
 	priv_ops->init_hang_checks = ar9003_hw_init_hang_checks;
 	priv_ops->detect_mac_hang = ar9003_hw_detect_mac_hang;