提交 93e71695 编写于 作者: G Georgi Djakov 提交者: Stephen Boyd

clk: qcom: Add MSM8916 iommu clocks

Add support for the msm8916 TCU (Translation Control Unit) clocks that
are needed for IOMMU.
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
上级 ab5c3429
......@@ -2347,6 +2347,51 @@ static struct clk_branch gcc_sdcc2_apps_clk = {
},
};
static struct clk_rcg2 bimc_ddr_clk_src = {
.cmd_rcgr = 0x32004,
.hid_width = 5,
.parent_map = gcc_xo_gpll0_bimc_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "bimc_ddr_clk_src",
.parent_names = gcc_xo_gpll0_bimc,
.num_parents = 3,
.ops = &clk_rcg2_ops,
.flags = CLK_GET_RATE_NOCACHE,
},
};
static struct clk_branch gcc_apss_tcu_clk = {
.halt_reg = 0x12018,
.clkr = {
.enable_reg = 0x4500c,
.enable_mask = BIT(1),
.hw.init = &(struct clk_init_data){
.name = "gcc_apss_tcu_clk",
.parent_names = (const char *[]){
"bimc_ddr_clk_src",
},
.num_parents = 1,
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gcc_gfx_tcu_clk = {
.halt_reg = 0x12020,
.clkr = {
.enable_reg = 0x4500c,
.enable_mask = BIT(2),
.hw.init = &(struct clk_init_data){
.name = "gcc_gfx_tcu_clk",
.parent_names = (const char *[]){
"bimc_ddr_clk_src",
},
.num_parents = 1,
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gcc_gtcu_ahb_clk = {
.halt_reg = 0x12044,
.clkr = {
......@@ -2730,6 +2775,9 @@ static struct clk_regmap *gcc_msm8916_clocks[] = {
[GCC_VENUS0_AHB_CLK] = &gcc_venus0_ahb_clk.clkr,
[GCC_VENUS0_AXI_CLK] = &gcc_venus0_axi_clk.clkr,
[GCC_VENUS0_VCODEC0_CLK] = &gcc_venus0_vcodec0_clk.clkr,
[BIMC_DDR_CLK_SRC] = &bimc_ddr_clk_src.clkr,
[GCC_APSS_TCU_CLK] = &gcc_apss_tcu_clk.clkr,
[GCC_GFX_TCU_CLK] = &gcc_gfx_tcu_clk.clkr,
};
static struct gdsc *gcc_msm8916_gdscs[] = {
......
......@@ -152,6 +152,9 @@
#define GCC_VENUS0_AHB_CLK 135
#define GCC_VENUS0_AXI_CLK 136
#define GCC_VENUS0_VCODEC0_CLK 137
#define BIMC_DDR_CLK_SRC 138
#define GCC_APSS_TCU_CLK 139
#define GCC_GFX_TCU_CLK 140
/* Indexes for GDSCs */
#define BIMC_GDSC 0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册