提交 93e0272a 编写于 作者: L Linus Walleij

Merge tag 'gpio-fixes-for-v5.8-rc3' of...

Merge tag 'gpio-fixes-for-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

gpio fixes for v5.8-rc3

- several fixes for gpio-pca953x
......@@ -107,6 +107,84 @@ static const struct i2c_device_id pca953x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
#ifdef CONFIG_GPIO_PCA953X_IRQ
#include <linux/dmi.h>
#include <linux/gpio.h>
#include <linux/list.h>
static const struct dmi_system_id pca953x_dmi_acpi_irq_info[] = {
{
/*
* On Intel Galileo Gen 2 board the IRQ pin of one of
* the I²C GPIO expanders, which has GpioInt() resource,
* is provided as an absolute number instead of being
* relative. Since first controller (gpio-sch.c) and
* second (gpio-dwapb.c) are at the fixed bases, we may
* safely refer to the number in the global space to get
* an IRQ out of it.
*/
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
},
},
{}
};
#ifdef CONFIG_ACPI
static int pca953x_acpi_get_pin(struct acpi_resource *ares, void *data)
{
struct acpi_resource_gpio *agpio;
int *pin = data;
if (acpi_gpio_get_irq_resource(ares, &agpio))
*pin = agpio->pin_table[0];
return 1;
}
static int pca953x_acpi_find_pin(struct device *dev)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
int pin = -ENOENT, ret;
LIST_HEAD(r);
ret = acpi_dev_get_resources(adev, &r, pca953x_acpi_get_pin, &pin);
acpi_dev_free_resource_list(&r);
if (ret < 0)
return ret;
return pin;
}
#else
static inline int pca953x_acpi_find_pin(struct device *dev) { return -ENXIO; }
#endif
static int pca953x_acpi_get_irq(struct device *dev)
{
int pin, ret;
pin = pca953x_acpi_find_pin(dev);
if (pin < 0)
return pin;
dev_info(dev, "Applying ACPI interrupt quirk (GPIO %d)\n", pin);
if (!gpio_is_valid(pin))
return -EINVAL;
ret = gpio_request(pin, "pca953x interrupt");
if (ret)
return ret;
ret = gpio_to_irq(pin);
/* When pin is used as an IRQ, no need to keep it requested */
gpio_free(pin);
return ret;
}
#endif
static const struct acpi_device_id pca953x_acpi_ids[] = {
{ "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ }
......@@ -322,6 +400,7 @@ static const struct regmap_config pca953x_ai_i2c_regmap = {
.writeable_reg = pca953x_writeable_register,
.volatile_reg = pca953x_volatile_register,
.disable_locking = true,
.cache_type = REGCACHE_RBTREE,
.max_register = 0x7f,
};
......@@ -623,8 +702,6 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
DECLARE_BITMAP(reg_direction, MAX_LINE);
int level;
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
if (chip->driver_data & PCA_PCAL) {
/* Enable latch on interrupt-enabled inputs */
pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
......@@ -635,7 +712,11 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
}
/* Switch direction to input if needed */
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio);
bitmap_complement(reg_direction, reg_direction, gc->ngpio);
bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
/* Look for any newly setup interrupt */
......@@ -734,14 +815,16 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid)
struct gpio_chip *gc = &chip->gpio_chip;
DECLARE_BITMAP(pending, MAX_LINE);
int level;
bool ret;
if (!pca953x_irq_pending(chip, pending))
return IRQ_NONE;
mutex_lock(&chip->i2c_lock);
ret = pca953x_irq_pending(chip, pending);
mutex_unlock(&chip->i2c_lock);
for_each_set_bit(level, pending, gc->ngpio)
handle_nested_irq(irq_find_mapping(gc->irq.domain, level));
return IRQ_HANDLED;
return IRQ_RETVAL(ret);
}
static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
......@@ -752,6 +835,12 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
DECLARE_BITMAP(irq_stat, MAX_LINE);
int ret;
if (dmi_first_match(pca953x_dmi_acpi_irq_info)) {
ret = pca953x_acpi_get_irq(&client->dev);
if (ret > 0)
client->irq = ret;
}
if (!client->irq)
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册