提交 93c06cbb 编写于 作者: S Serge E. Hallyn 提交者: James Morris

selinux: add support for installing a dummy policy (v2)

In August 2006 I posted a patch generating a minimal SELinux policy.  This
week, David P. Quigley posted an updated version of that as a patch against
the kernel.  It also had nice logic for auto-installing the policy.

Following is David's original patch intro (preserved especially
bc it has stats on the generated policies):

se interested in the changes there were only two significant
changes. The first is that the iteration through the list of classes
used NULL as a sentinel value. The problem with this is that the
class_to_string array actually has NULL entries in its table as place
holders for the user space object classes.

The second change was that it would seem at some point the initial sids
table was NULL terminated. This is no longer the case so that iteration
has to be done on array length instead of looking for NULL.

Some statistics on the policy that it generates:

The policy consists of 523 lines which contain no blank lines. Of those
523 lines 453 of them are class, permission, and initial sid
definitions. These lines are usually little to no concern to the policy
developer since they will not be adding object classes or permissions.
Of the remaining 70 lines there is one type, one role, and one user
statement. The remaining lines are broken into three portions. The first
group are TE allow rules which make up 29 of the remaining lines, the
second is assignment of labels to the initial sids which consist of 27
lines, and file system labeling statements which are the remaining 11.

In addition to the policy.conf generated there is a single file_contexts
file containing two lines which labels the entire system with base_t.

This policy generates a policy.23 binary that is 7920 bytes.

(then a few versions later...):

The new policy is 587 lines (stripped of blank lines) with 476 of those
lines being the boilerplate that I mentioned last time. The remaining
111 lines have the 3 lines for type, user, and role, 70 lines for the
allow rules (one for each object class including user space object
classes), 27 lines to assign types to the initial sids, and 11 lines for
file system labeling. The policy binary is 9194 bytes.

Changelog:

	Aug 26: Added Documentation/SELinux.txt
	Aug 26: Incorporated a set of comments by Stephen Smalley:
		1. auto-setup SELINUXTYPE=dummy
		2. don't auto-install if selinux is enabled with
			non-dummy policy
		3. don't re-compute policy version
		4. /sbin/setfiles not /usr/sbin/setfiles
	Aug 22: As per JMorris comments, made sure make distclean
		cleans up the mdp directory.
		Removed a check for file_contexts which is now
		created in the same file as the check, making it
		superfluous.
Signed-off-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NDavid Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>
上级 3f23d815
If you want to use SELinux, chances are you will want
to use the distro-provided policies, or install the
latest reference policy release from
http://oss.tresys.com/projects/refpolicy
However, if you want to install a dummy policy for
testing, you can do using 'mdp' provided under
scripts/selinux. Note that this requires the selinux
userspace to be installed - in particular you will
need checkpolicy to compile a kernel, and setfiles and
fixfiles to label the filesystem.
1. Compile the kernel with selinux enabled.
2. Type 'make' to compile mdp.
3. Make sure that you are not running with
SELinux enabled and a real policy. If
you are, reboot with selinux disabled
before continuing.
4. Run install_policy.sh:
cd scripts/selinux
sh install_policy.sh
Step 4 will create a new dummy policy valid for your
kernel, with a single selinux user, role, and type.
It will compile the policy, will set your SELINUXTYPE to
dummy in /etc/selinux/config, install the compiled policy
as 'dummy', and relabel your filesystem.
......@@ -20,6 +20,7 @@ hostprogs-y += unifdef
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
# Let clean descend into subdirs
subdir- += basic kconfig package
subdir- += basic kconfig package selinux
subdir-y := mdp
subdir- += mdp
Please see Documentation/SELinux.txt for information on
installing a dummy SELinux policy.
#!/bin/sh
if [ `id -u` -ne 0 ]; then
echo "$0: must be root to install the selinux policy"
exit 1
fi
SF=`which setfiles`
if [ $? -eq 1 ]; then
if [ -f /sbin/setfiles ]; then
SF="/usr/setfiles"
else
echo "no selinux tools installed: setfiles"
exit 1
fi
fi
cd mdp
CP=`which checkpolicy`
VERS=`$CP -V | awk '{print $1}'`
./mdp policy.conf file_contexts
$CP -o policy.$VERS policy.conf
mkdir -p /etc/selinux/dummy/policy
mkdir -p /etc/selinux/dummy/contexts/files
cp file_contexts /etc/selinux/dummy/contexts/files
cp dbus_contexts /etc/selinux/dummy/contexts
cp policy.$VERS /etc/selinux/dummy/policy
FC_FILE=/etc/selinux/dummy/contexts/files/file_contexts
if [ ! -d /etc/selinux ]; then
mkdir -p /etc/selinux
fi
if [ ! -f /etc/selinux/config ]; then
cat > /etc/selinux/config << EOF
SELINUX=enforcing
SELINUXTYPE=dummy
EOF
else
TYPE=`cat /etc/selinux/config | grep "^SELINUXTYPE" | tail -1 | awk -F= '{ print $2 '}`
if [ "eq$TYPE" != "eqdummy" ]; then
selinuxenabled
if [ $? -eq 0 ]; then
echo "SELinux already enabled with a non-dummy policy."
echo "Exiting. Please install policy by hand if that"
echo "is what you REALLY want."
exit 1
fi
mv /etc/selinux/config /etc/selinux/config.mdpbak
grep -v "^SELINUXTYPE" /etc/selinux/config.mdpbak >> /etc/selinux/config
echo "SELINUXTYPE=dummy" >> /etc/selinux/config
fi
fi
cd /etc/selinux/dummy/contexts/files
$SF file_contexts /
mounts=`cat /proc/$$/mounts | egrep "ext2|ext3|xfs|jfs|ext4|ext4dev|gfs2" | awk '{ print $2 '}`
$SF file_contexts $mounts
dodev=`cat /proc/$$/mounts | grep "/dev "`
if [ "eq$dodev" != "eq" ]; then
mount --move /dev /mnt
$SF file_contexts /dev
mount --move /mnt /dev
fi
hostprogs-y := mdp
HOST_EXTRACFLAGS += -Isecurity/selinux/include
always := $(hostprogs-y)
clean-files := $(hostprogs-y) policy.* file_contexts
<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
<selinux>
</selinux>
</busconfig>
/*
*
* mdp - make dummy policy
*
* When pointed at a kernel tree, builds a dummy policy for that kernel
* with exactly one type with full rights to itself.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2006
*
* Authors: Serge E. Hallyn <serue@us.ibm.com>
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include "flask.h"
void usage(char *name)
{
printf("usage: %s [-m] policy_file context_file\n", name);
exit(1);
}
void find_common_name(char *cname, char *dest, int len)
{
char *start, *end;
start = strchr(cname, '_')+1;
end = strchr(start, '_');
if (!start || !end || start-cname > len || end-start > len) {
printf("Error with commons defines\n");
exit(1);
}
strncpy(dest, start, end-start);
dest[end-start] = '\0';
}
#define S_(x) x,
static char *classlist[] = {
#include "class_to_string.h"
NULL
};
#undef S_
#include "initial_sid_to_string.h"
#define TB_(x) char *x[] = {
#define TE_(x) NULL };
#define S_(x) x,
#include "common_perm_to_string.h"
#undef TB_
#undef TE_
#undef S_
struct common {
char *cname;
char **perms;
};
struct common common[] = {
#define TB_(x) { #x, x },
#define S_(x)
#define TE_(x)
#include "common_perm_to_string.h"
#undef TB_
#undef TE_
#undef S_
};
#define S_(x, y, z) {x, #y},
struct av_inherit {
int class;
char *common;
};
struct av_inherit av_inherit[] = {
#include "av_inherit.h"
};
#undef S_
#include "av_permissions.h"
#define S_(x, y, z) {x, y, z},
struct av_perms {
int class;
int perm_i;
char *perm_s;
};
struct av_perms av_perms[] = {
#include "av_perm_to_string.h"
};
#undef S_
int main(int argc, char *argv[])
{
int i, j, mls = 0;
char **arg, *polout, *ctxout;
int classlist_len, initial_sid_to_string_len;
FILE *fout;
if (argc < 3)
usage(argv[0]);
arg = argv+1;
if (argc==4 && strcmp(argv[1], "-m") == 0) {
mls = 1;
arg++;
}
polout = *arg++;
ctxout = *arg;
fout = fopen(polout, "w");
if (!fout) {
printf("Could not open %s for writing\n", polout);
usage(argv[0]);
}
classlist_len = sizeof(classlist) / sizeof(char *);
/* print out the classes */
for (i=1; i < classlist_len; i++) {
if(classlist[i])
fprintf(fout, "class %s\n", classlist[i]);
else
fprintf(fout, "class user%d\n", i);
}
fprintf(fout, "\n");
initial_sid_to_string_len = sizeof(initial_sid_to_string) / sizeof (char *);
/* print out the sids */
for (i=1; i < initial_sid_to_string_len; i++)
fprintf(fout, "sid %s\n", initial_sid_to_string[i]);
fprintf(fout, "\n");
/* print out the commons */
for (i=0; i< sizeof(common)/sizeof(struct common); i++) {
char cname[101];
find_common_name(common[i].cname, cname, 100);
cname[100] = '\0';
fprintf(fout, "common %s\n{\n", cname);
for (j=0; common[i].perms[j]; j++)
fprintf(fout, "\t%s\n", common[i].perms[j]);
fprintf(fout, "}\n\n");
}
fprintf(fout, "\n");
/* print out the class permissions */
for (i=1; i < classlist_len; i++) {
if (classlist[i]) {
int firstperm = -1, numperms = 0;
fprintf(fout, "class %s\n", classlist[i]);
/* does it inherit from a common? */
for (j=0; j < sizeof(av_inherit)/sizeof(struct av_inherit); j++)
if (av_inherit[j].class == i)
fprintf(fout, "inherits %s\n", av_inherit[j].common);
for (j=0; j < sizeof(av_perms)/sizeof(struct av_perms); j++) {
if (av_perms[j].class == i) {
if (firstperm == -1)
firstperm = j;
numperms++;
}
}
if (!numperms) {
fprintf(fout, "\n");
continue;
}
fprintf(fout, "{\n");
/* print out the av_perms */
for (j=0; j < numperms; j++) {
fprintf(fout, "\t%s\n", av_perms[firstperm+j].perm_s);
}
fprintf(fout, "}\n\n");
}
}
fprintf(fout, "\n");
/* NOW PRINT OUT MLS STUFF */
if (mls) {
printf("MLS not yet implemented\n");
exit(1);
}
/* types, roles, and allows */
fprintf(fout, "type base_t;\n");
fprintf(fout, "role base_r types { base_t };\n");
for (i=1; i < classlist_len; i++) {
if (classlist[i])
fprintf(fout, "allow base_t base_t:%s *;\n", classlist[i]);
else
fprintf(fout, "allow base_t base_t:user%d *;\n", i);
}
fprintf(fout, "user user_u roles { base_r };\n");
fprintf(fout, "\n");
/* default sids */
for (i=1; i < initial_sid_to_string_len; i++)
fprintf(fout, "sid %s user_u:base_r:base_t\n", initial_sid_to_string[i]);
fprintf(fout, "\n");
fprintf(fout, "fs_use_xattr ext2 user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_xattr ext3 user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_xattr jfs user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_xattr xfs user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_xattr reiserfs user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_task pipefs user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_task sockfs user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_trans devpts user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_trans tmpfs user_u:base_r:base_t;\n");
fprintf(fout, "fs_use_trans shm user_u:base_r:base_t;\n");
fprintf(fout, "genfscon proc / user_u:base_r:base_t\n");
fclose(fout);
fout = fopen(ctxout, "w");
if (!fout) {
printf("Wrote policy, but cannot open %s for writing\n", ctxout);
usage(argv[0]);
}
fprintf(fout, "/ user_u:base_r:base_t\n");
fprintf(fout, "/.* user_u:base_r:base_t\n");
fclose(fout);
return 0;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册