[ARM] Orion: fix ->map_irq() PCIe bus number check

The current orion5x board ->map_irq() routines check whether a
given bus number lives on the PCIe controller by comparing it with
the PCIe controller's primary bus number.  This doesn't work in
case there are multiple buses in the PCIe domain, i.e. if there
exists a PCIe bridge on the primary PCIe bus.

This patch adds a helper function (orion5x_pci_map_irq()) that
returns the IRQ number for the given PCI device if that device has
a hard-wired IRQ, or -1 otherwise, and makes each board's
->map_irq() function use this helper function.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

arch/arm/mach-orion5x/common.h

@@ -33,10 +33,9 @@ struct pci_sys_data;
 struct pci_bus;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
-int orion5x_pcie_local_bus_nr(void);
-int orion5x_pci_local_bus_nr(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
 /*
  * Valid GPIO pins according to MPP setup, used by machine-setup.

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -241,14 +241,17 @@ void __init db88f5281_pci_preinit(void)
 
 static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
 	/*
-	 * PCIE IRQ is connected internally (not GPIO)
+	 * Check for devices with hard-wired IRQs.
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
 
 	/*
-	 * PCI IRQs are connected via GPIOs
+	 * PCI IRQs are connected via GPIOs.
 	 */
 	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
 	case 0:

arch/arm/mach-orion5x/dns323-setup.c

@@ -43,11 +43,16 @@
 
 static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	/* PCI-E */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	int irq;
 
-	pr_err("%s: requested mapping for unknown bus\n", __func__);
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	pr_err("%s: requested mapping for unknown device\n", __func__);
 
 	return -1;
 }

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -120,13 +120,19 @@ static struct platform_device kurobox_pro_nor_flash = {
 
 static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
 	/*
 	 * PCI isn't used on the Kuro
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
-	else
-		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+	printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
 
 	return -1;
 }

arch/arm/mach-orion5x/pci.c

@@ -41,11 +41,6 @@ void __init orion5x_pcie_id(u32 *dev, u32 *rev)
 	*rev = orion_pcie_rev(PCIE_BASE);
 }
 
-int __init orion5x_pcie_local_bus_nr(void)
-{
-	return orion_pcie_get_local_bus_nr(PCIE_BASE);
-}
-
 static int pcie_valid_config(int bus, int dev)
 {
 	/*
@@ -269,7 +264,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
  */
 static DEFINE_SPINLOCK(orion5x_pci_lock);
 
-int orion5x_pci_local_bus_nr(void)
+static int orion5x_pci_local_bus_nr(void)
 {
 	u32 conf = orion5x_read(PCI_P2P_CONF);
 	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
@@ -557,3 +552,16 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
 
 	return bus;
 }
+
+int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int bus = dev->bus->number;
+
+	/*
+	 * PCIe endpoint?
+	 */
+	if (bus < orion5x_pci_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
+
+	return -1;
+}

arch/arm/mach-orion5x/rd88f5182-setup.c

@@ -172,11 +172,14 @@ void __init rd88f5182_pci_preinit(void)
 
 static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
 	/*
-	 * PCI-E isn't used on the RD2
+	 * Check for devices with hard-wired IRQs.
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
 
 	/*
 	 * PCI IRQs are connected via GPIOs

arch/arm/mach-orion5x/ts209-setup.c

@@ -141,14 +141,17 @@ void __init qnap_ts209_pci_preinit(void)
 
 static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
 	/*
-	 * PCIE IRQ is connected internally (not GPIO)
+	 * Check for devices with hard-wired IRQs.
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
 
 	/*
-	 * PCI IRQs are connected via GPIOs
+	 * PCI IRQs are connected via GPIOs.
 	 */
 	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
 	case 0: