提交 91c0719c 编写于 作者: D Dave Airlie

Merge tag 'drm-misc-fixes-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes

Driver Changes:
- dw-hdmi: Fix compilation error if REGMAP_MMIO not selected (Laurent)
- host1x: Fix incorrect return value (Christophe)
- tegra: Shore up idr API usage in tegra staging code (Dmitry)
- mgag200: Always use HiPri mode for G200e4v2 and limit max bandwidth (Mathieu)
- mxsfb: Ensure display can be lit up without bootloader initialization (Fabio)

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mathieu Larouche <mathieu.larouche@matrox.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>

* tag 'drm-misc-fixes-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc:
  drm: mxsfb_crtc: Reset the eLCDIF controller
  drm/mgag200: Fix to always set HiPri for G200e4 V2
  drm/tegra: Correct idr_alloc() minimum id
  drm/tegra: Fix lockup on a use of staging API
  gpu: host1x: Fix error handling
  drm: dw-hdmi: Fix compilation breakage by selecting REGMAP_MMIO
config DRM_DW_HDMI
tristate
select DRM_KMS_HELPER
select REGMAP_MMIO
config DRM_DW_HDMI_AHB_AUDIO
tristate "Synopsys Designware AHB Audio interface"
......
......@@ -1173,7 +1173,10 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
if (IS_G200_SE(mdev)) {
if (mdev->unique_rev_id >= 0x02) {
if (mdev->unique_rev_id >= 0x04) {
WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
WREG8(MGAREG_CRTCEXT_DATA, 0);
} else if (mdev->unique_rev_id >= 0x02) {
u8 hi_pri_lvl;
u32 bpp;
u32 mb;
......@@ -1639,6 +1642,10 @@ static int mga_vga_mode_valid(struct drm_connector *connector,
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (30100 * 1024))
return MODE_BANDWIDTH;
} else {
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (55000 * 1024))
return MODE_BANDWIDTH;
}
} else if (mdev->type == G200_WB) {
if (mode->hdisplay > 1280)
......
......@@ -35,6 +35,13 @@
#include "mxsfb_drv.h"
#include "mxsfb_regs.h"
#define MXS_SET_ADDR 0x4
#define MXS_CLR_ADDR 0x8
#define MODULE_CLKGATE BIT(30)
#define MODULE_SFTRST BIT(31)
/* 1 second delay should be plenty of time for block reset */
#define RESET_TIMEOUT 1000000
static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val)
{
return (val & mxsfb->devdata->hs_wdth_mask) <<
......@@ -159,6 +166,36 @@ static void mxsfb_disable_controller(struct mxsfb_drm_private *mxsfb)
clk_disable_unprepare(mxsfb->clk_disp_axi);
}
/*
* Clear the bit and poll it cleared. This is usually called with
* a reset address and mask being either SFTRST(bit 31) or CLKGATE
* (bit 30).
*/
static int clear_poll_bit(void __iomem *addr, u32 mask)
{
u32 reg;
writel(mask, addr + MXS_CLR_ADDR);
return readl_poll_timeout(addr, reg, !(reg & mask), 0, RESET_TIMEOUT);
}
static int mxsfb_reset_block(void __iomem *reset_addr)
{
int ret;
ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
if (ret)
return ret;
writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
if (ret)
return ret;
return clear_poll_bit(reset_addr, MODULE_CLKGATE);
}
static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
{
struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
......@@ -173,6 +210,11 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
*/
mxsfb_enable_axi_clk(mxsfb);
/* Mandatory eLCDIF reset as per the Reference Manual */
err = mxsfb_reset_block(mxsfb->base);
if (err)
return;
/* Clear the FIFOs */
writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
......
......@@ -451,18 +451,6 @@ int tegra_drm_submit(struct tegra_drm_context *context,
#ifdef CONFIG_DRM_TEGRA_STAGING
static struct tegra_drm_context *
tegra_drm_file_get_context(struct tegra_drm_file *file, u32 id)
{
struct tegra_drm_context *context;
mutex_lock(&file->lock);
context = idr_find(&file->contexts, id);
mutex_unlock(&file->lock);
return context;
}
static int tegra_gem_create(struct drm_device *drm, void *data,
struct drm_file *file)
{
......@@ -551,7 +539,7 @@ static int tegra_client_open(struct tegra_drm_file *fpriv,
if (err < 0)
return err;
err = idr_alloc(&fpriv->contexts, context, 0, 0, GFP_KERNEL);
err = idr_alloc(&fpriv->contexts, context, 1, 0, GFP_KERNEL);
if (err < 0) {
client->ops->close_channel(context);
return err;
......@@ -606,7 +594,7 @@ static int tegra_close_channel(struct drm_device *drm, void *data,
mutex_lock(&fpriv->lock);
context = tegra_drm_file_get_context(fpriv, args->context);
context = idr_find(&fpriv->contexts, args->context);
if (!context) {
err = -EINVAL;
goto unlock;
......@@ -631,7 +619,7 @@ static int tegra_get_syncpt(struct drm_device *drm, void *data,
mutex_lock(&fpriv->lock);
context = tegra_drm_file_get_context(fpriv, args->context);
context = idr_find(&fpriv->contexts, args->context);
if (!context) {
err = -ENODEV;
goto unlock;
......@@ -660,7 +648,7 @@ static int tegra_submit(struct drm_device *drm, void *data,
mutex_lock(&fpriv->lock);
context = tegra_drm_file_get_context(fpriv, args->context);
context = idr_find(&fpriv->contexts, args->context);
if (!context) {
err = -ENODEV;
goto unlock;
......@@ -685,7 +673,7 @@ static int tegra_get_syncpt_base(struct drm_device *drm, void *data,
mutex_lock(&fpriv->lock);
context = tegra_drm_file_get_context(fpriv, args->context);
context = idr_find(&fpriv->contexts, args->context);
if (!context) {
err = -ENODEV;
goto unlock;
......
......@@ -172,7 +172,7 @@ static int host1x_probe(struct platform_device *pdev)
host->rst = devm_reset_control_get(&pdev->dev, "host1x");
if (IS_ERR(host->rst)) {
err = PTR_ERR(host->clk);
err = PTR_ERR(host->rst);
dev_err(&pdev->dev, "failed to get reset: %d\n", err);
return err;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册