drm/i915/chv: Try to program the PHY used clock channel overrides

These should make it possible to feed port C from pipe A or port B from
pipe B. Didn't quite seem to work though.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -771,6 +771,8 @@ enum punit_power_well {
 
 #define _VLV_PCS_DW8_CH0		0x8220
 #define _VLV_PCS_DW8_CH1		0x8420
+#define   CHV_PCS_USEDCLKCHANNEL_OVRRIDE	(1 << 20)
+#define   CHV_PCS_USEDCLKCHANNEL		(1 << 21)
 #define VLV_PCS_DW8(ch) _PORT(ch, _VLV_PCS_DW8_CH0, _VLV_PCS_DW8_CH1)
 
 #define _VLV_PCS01_DW8_CH0		0x0220
@@ -895,6 +897,11 @@ enum punit_power_well {
 #define   DPIO_DCLKP_EN			(1 << 13)
 #define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1)
 
+#define _CHV_CMN_DW19_CH0		0x814c
+#define _CHV_CMN_DW6_CH1		0x8098
+#define   CHV_CMN_USEDCLKCHANNEL	(1 << 13)
+#define CHV_CMN_DW19(ch) _PIPE(ch, _CHV_CMN_DW19_CH0, _CHV_CMN_DW6_CH1)
+
 #define CHV_CMN_DW30			0x8178
 #define   DPIO_LRC_BYPASS		(1 << 3)
 

drivers/gpu/drm/i915/intel_dp.c

@@ -2119,6 +2119,51 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
 	vlv_wait_port_ready(dev_priv, dport);
 }
 
+static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
+{
+	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(encoder->base.crtc);
+	enum dpio_channel ch = vlv_dport_to_channel(dport);
+	enum pipe pipe = intel_crtc->pipe;
+	u32 val;
+
+	mutex_lock(&dev_priv->dpio_lock);
+
+	/* program clock channel usage */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
+	val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+	if (pipe != PIPE_B)
+		val &= ~CHV_PCS_USEDCLKCHANNEL;
+	else
+		val |= CHV_PCS_USEDCLKCHANNEL;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
+	val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+	if (pipe != PIPE_B)
+		val &= ~CHV_PCS_USEDCLKCHANNEL;
+	else
+		val |= CHV_PCS_USEDCLKCHANNEL;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
+
+	/*
+	 * This a a bit weird since generally CL
+	 * matches the pipe, but here we need to
+	 * pick the CL based on the port.
+	 */
+	val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
+	if (pipe != PIPE_B)
+		val &= ~CHV_CMN_USEDCLKCHANNEL;
+	else
+		val |= CHV_CMN_USEDCLKCHANNEL;
+	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
+
+	mutex_unlock(&dev_priv->dpio_lock);
+}
+
 /*
  * Native read with retry for link status and receiver capability reads for
  * cases where the sink may still be asleep.
@@ -4335,6 +4380,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 	intel_encoder->get_hw_state = intel_dp_get_hw_state;
 	intel_encoder->get_config = intel_dp_get_config;
 	if (IS_CHERRYVIEW(dev)) {
+		intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable;
 		intel_encoder->pre_enable = chv_pre_enable_dp;
 		intel_encoder->enable = vlv_enable_dp;
 		intel_encoder->post_disable = chv_post_disable_dp;

drivers/gpu/drm/i915/intel_hdmi.c

@@ -1229,6 +1229,51 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
 	mutex_unlock(&dev_priv->dpio_lock);
 }
 
+static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
+{
+	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(encoder->base.crtc);
+	enum dpio_channel ch = vlv_dport_to_channel(dport);
+	enum pipe pipe = intel_crtc->pipe;
+	u32 val;
+
+	mutex_lock(&dev_priv->dpio_lock);
+
+	/* program clock channel usage */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
+	val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+	if (pipe != PIPE_B)
+		val &= ~CHV_PCS_USEDCLKCHANNEL;
+	else
+		val |= CHV_PCS_USEDCLKCHANNEL;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
+	val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+	if (pipe != PIPE_B)
+		val &= ~CHV_PCS_USEDCLKCHANNEL;
+	else
+		val |= CHV_PCS_USEDCLKCHANNEL;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
+
+	/*
+	 * This a a bit weird since generally CL
+	 * matches the pipe, but here we need to
+	 * pick the CL based on the port.
+	 */
+	val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
+	if (pipe != PIPE_B)
+		val &= ~CHV_CMN_USEDCLKCHANNEL;
+	else
+		val |= CHV_CMN_USEDCLKCHANNEL;
+	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
+
+	mutex_unlock(&dev_priv->dpio_lock);
+}
+
 static void vlv_hdmi_post_disable(struct intel_encoder *encoder)
 {
 	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
@@ -1528,6 +1573,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
 	intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
 	intel_encoder->get_config = intel_hdmi_get_config;
 	if (IS_CHERRYVIEW(dev)) {
+		intel_encoder->pre_pll_enable = chv_hdmi_pre_pll_enable;
 		intel_encoder->pre_enable = chv_hdmi_pre_enable;
 		intel_encoder->enable = vlv_enable_hdmi;
 		intel_encoder->post_disable = chv_hdmi_post_disable;