[PATCH] x86: sutomatically enable bigsmp when we have more than 8 CPUs

i386 generic subarchitecture requires explicit dmi strings or command line
to enable bigsmp mode.  The patch below removes that restriction, and uses
bigsmp as soon as it finds more than 8 logical CPUs, Intel processors and
xAPIC support.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/i386/kernel/acpi/boot.c

@@ -833,6 +833,9 @@ acpi_process_madt(void)
 		if (!error) {
 			acpi_lapic = 1;
 
+#ifdef CONFIG_X86_GENERICARCH
+			generic_bigsmp_probe();
+#endif
 			/*
 			 * Parse MADT IO-APIC entries
 			 */

arch/i386/kernel/mpparse.c

@@ -65,6 +65,8 @@ int nr_ioapics;
 int pic_mode;
 unsigned long mp_lapic_addr;
 
+unsigned int def_to_bigsmp = 0;
+
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
 /* Internal processor count */
@@ -213,6 +215,13 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		ver = 0x10;
 	}
 	apic_version[m->mpc_apicid] = ver;
+	if ((num_processors > 8) &&
+	    APIC_XAPIC(ver) &&
+	    (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
+		def_to_bigsmp = 1;
+	else
+		def_to_bigsmp = 0;
+
 	bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
 }
 

arch/i386/kernel/setup.c

@@ -1585,8 +1585,14 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	acpi_boot_table_init();
 	acpi_boot_init();
-#endif
 
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+	if (def_to_bigsmp)
+		printk(KERN_WARNING "More than 8 CPUs detected and "
+			"CONFIG_X86_PC cannot handle it.\nUse "
+			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+#endif
+#endif
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (smp_found_config)
 		get_smp_config();

arch/i386/mach-generic/bigsmp.c

@@ -47,7 +47,10 @@ static struct dmi_system_id __initdata bigsmp_dmi_table[] = {
 
 static __init int probe_bigsmp(void)
 { 
-	dmi_check_system(bigsmp_dmi_table);
+	if (def_to_bigsmp)
+        	dmi_bigsmp = 1;
+	else
+		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp; 
 } 
 

arch/i386/mach-generic/probe.c

@@ -30,6 +30,25 @@ struct genapic *apic_probe[] __initdata = {
 	NULL,
 };
 
+static int cmdline_apic;
+
+void __init generic_bigsmp_probe(void)
+{
+	/*
+	 * This routine is used to switch to bigsmp mode when
+	 * - There is no apic= option specified by the user
+	 * - generic_apic_probe() has choosen apic_default as the sub_arch
+	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
+	 */
+
+	if (!cmdline_apic && genapic == &apic_default)
+		if (apic_bigsmp.probe()) {
+			genapic = &apic_bigsmp;
+			printk(KERN_INFO "Overriding APIC driver with %s\n",
+			       genapic->name);
+		}
+}
+
 void __init generic_apic_probe(char *command_line) 
 { 
 	char *s;
@@ -52,6 +71,7 @@ void __init generic_apic_probe(char *command_line)
 		if (!changed)
 			printk(KERN_ERR "Unknown genapic `%s' specified.\n", s);
 		*p = old;
+		cmdline_apic = changed;
 	} 
 	for (i = 0; !changed && apic_probe[i]; i++) { 
 		if (apic_probe[i]->probe()) {

include/asm-i386/apicdef.h

@@ -16,6 +16,7 @@
 #define			GET_APIC_VERSION(x)	((x)&0xFF)
 #define			GET_APIC_MAXLVT(x)	(((x)>>16)&0xFF)
 #define			APIC_INTEGRATED(x)	((x)&0xF0)
+#define			APIC_XAPIC(x)		((x) >= 0x14)
 #define		APIC_TASKPRI	0x80
 #define			APIC_TPRI_MASK		0xFF
 #define		APIC_ARBPRI	0x90

include/asm-i386/mach-generic/mach_apic.h

@@ -28,4 +28,6 @@
 #define enable_apic_mode (genapic->enable_apic_mode)
 #define phys_pkg_id (genapic->phys_pkg_id)
 
+extern void generic_bigsmp_probe(void);
+
 #endif /* __ASM_MACH_APIC_H */

include/asm-i386/mpspec.h

@@ -11,6 +11,7 @@ extern int mp_bus_id_to_local [MAX_MP_BUSSES];
 extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES];
 
+extern unsigned int def_to_bigsmp;
 extern unsigned int boot_cpu_physical_apicid;
 extern int smp_found_config;
 extern void find_smp_config (void);