提交 9117c6dc 编写于 作者: S Stefan Richter

ieee1394: sbp2: remove unused struct members

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
上级 28b06679
......@@ -1288,16 +1288,13 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
struct csr1212_keyval *kv;
struct csr1212_dentry *dentry;
u64 management_agent_addr;
u32 command_set_spec_id, command_set, unit_characteristics,
firmware_revision;
u32 unit_characteristics, firmware_revision;
unsigned workarounds;
int i;
management_agent_addr = 0x0;
command_set_spec_id = 0x0;
command_set = 0x0;
unit_characteristics = 0x0;
firmware_revision = 0x0;
management_agent_addr = 0;
unit_characteristics = 0;
firmware_revision = 0;
csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
switch (kv->key.id) {
......@@ -1312,14 +1309,6 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
ORB_SET_LUN(kv->value.immediate);
break;
case SBP2_COMMAND_SET_SPEC_ID_KEY:
command_set_spec_id = kv->value.immediate;
break;
case SBP2_COMMAND_SET_KEY:
command_set = kv->value.immediate;
break;
case SBP2_UNIT_CHARACTERISTICS_KEY:
/* FIXME: This is ignored so far.
* See SBP-2 clause 7.4.8. */
......@@ -1380,10 +1369,6 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
sbp2_parse_unit_directory(scsi_id, parent_ud);
} else {
scsi_id->management_agent_addr = management_agent_addr;
scsi_id->command_set_spec_id = command_set_spec_id;
scsi_id->command_set = command_set;
scsi_id->unit_characteristics = unit_characteristics;
scsi_id->firmware_revision = firmware_revision;
scsi_id->workarounds = workarounds;
if (ud->flags & UNIT_DIRECTORY_HAS_LUN)
scsi_id->lun = ORB_SET_LUN(ud->lun);
......
......@@ -295,12 +295,6 @@ struct scsi_id_instance_data {
u64 command_block_agent_addr;
u32 speed_code;
u32 max_payload_size;
/* Pulled from the device's unit directory */
u32 command_set_spec_id;
u32 command_set;
u32 unit_characteristics;
u32 firmware_revision;
u16 lun;
/* Address for the unit to write status blocks to */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册