bonding: cleanup module option descriptions

Weiping Pan noticed that the module option description for
xmit_hash_policy was incorrect and was nice enough to post a patch to
fix it.  The text was correct, but created a line over 80 characters and
I would rather not add those.  I realized I could take a few minutes and
clean up all the descriptions and things would look much better.  This
is the result.

Based on patch from Weiping Pan <panweiping3@gmail.com>.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
CC: Weiping Pan <panweiping3@gmail.com>
Reviewed-by: NWeiping Pan <panweiping3@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_main.c

@@ -113,9 +113,11 @@ MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
 module_param(tx_queues, int, 0);
 MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
 module_param_named(num_grat_arp, num_peer_notif, int, 0644);
-MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on failover event (alias of num_unsol_na)");
+MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
+			       "failover event (alias of num_unsol_na)");
 module_param_named(num_unsol_na, num_peer_notif, int, 0644);
-MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on failover event (alias of num_grat_arp)");
+MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
+			       "failover event (alias of num_grat_arp)");
 module_param(miimon, int, 0);
 MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
 module_param(updelay, int, 0);
@@ -127,7 +129,7 @@ module_param(use_carrier, int, 0);
 MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
 			      "0 for off, 1 for on (default)");
 module_param(mode, charp, 0);
-MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
+MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
 		       "1 for active-backup, 2 for balance-xor, "
 		       "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
 		       "6 for balance-alb");
@@ -142,27 +144,35 @@ MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
 				   "2 for only on active slave "
 				   "failure");
 module_param(lacp_rate, charp, 0);
-MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
-			    "(slow/fast)");
+MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
+			    "0 for slow, 1 for fast");
 module_param(ad_select, charp, 0);
-MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)");
+MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; "
+			    "0 for stable (default), 1 for bandwidth, "
+			    "2 for count");
 module_param(xmit_hash_policy, charp, 0);
-MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)"
-				   ", 1 for layer 3+4");
+MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; "
+				   "0 for layer 2 (default), 1 for layer 3+4, "
+				   "2 for layer 2+3");
 module_param(arp_interval, int, 0);
 MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
 module_param_array(arp_ip_target, charp, NULL, 0);
 MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
 module_param(arp_validate, charp, 0);
-MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all");
+MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
+			       "0 for none (default), 1 for active, "
+			       "2 for backup, 3 for all");
 module_param(fail_over_mac, charp, 0);
-MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC.  none (default), active or follow");
+MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
+				"the same MAC; 0 for none (default), "
+				"1 for active, 2 for follow");
 module_param(all_slaves_active, int, 0);
 MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface"
-				     "by setting active flag for all slaves.  "
+				     "by setting active flag for all slaves; "
 				     "0 for never (default), 1 for always.");
 module_param(resend_igmp, int, 0);
-MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on link failure");
+MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
+			      "link failure");
 
 /*----------------------------- Global variables ----------------------------*/