提交 9065bc38 编写于 作者: C Christian Lamparter 提交者: David S. Miller

net: emac: fix and unify emac_mdio functions

emac_mdio_read_link() was not copying the requested phy settings
back into the emac driver's own phy api. This has caused a link
speed mismatch issue for the AR8035 as the emac driver kept
trying to connect with 10/100MBps on a 1GBit/s link.

This patch also unifies shared code between emac_setup_aneg()
and emac_mdio_setup_forced(). And furthermore it removes
a chunk of emac_mdio_init_phy(), that was copying the same
data into itself.
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 19d90ece
......@@ -2478,20 +2478,24 @@ static int emac_mii_bus_reset(struct mii_bus *bus)
return emac_reset(dev);
}
static int emac_mdio_phy_start_aneg(struct mii_phy *phy,
struct phy_device *phy_dev)
{
phy_dev->autoneg = phy->autoneg;
phy_dev->speed = phy->speed;
phy_dev->duplex = phy->duplex;
phy_dev->advertising = phy->advertising;
return phy_start_aneg(phy_dev);
}
static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
{
struct net_device *ndev = phy->dev;
struct emac_instance *dev = netdev_priv(ndev);
dev->phy.autoneg = AUTONEG_ENABLE;
dev->phy.speed = SPEED_1000;
dev->phy.duplex = DUPLEX_FULL;
dev->phy.advertising = advertise;
phy->autoneg = AUTONEG_ENABLE;
phy->speed = dev->phy.speed;
phy->duplex = dev->phy.duplex;
phy->advertising = advertise;
return phy_start_aneg(dev->phy_dev);
return emac_mdio_phy_start_aneg(phy, dev->phy_dev);
}
static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
......@@ -2499,13 +2503,10 @@ static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
struct net_device *ndev = phy->dev;
struct emac_instance *dev = netdev_priv(ndev);
dev->phy.autoneg = AUTONEG_DISABLE;
dev->phy.speed = speed;
dev->phy.duplex = fd;
phy->autoneg = AUTONEG_DISABLE;
phy->speed = speed;
phy->duplex = fd;
return phy_start_aneg(dev->phy_dev);
return emac_mdio_phy_start_aneg(phy, dev->phy_dev);
}
static int emac_mdio_poll_link(struct mii_phy *phy)
......@@ -2527,16 +2528,17 @@ static int emac_mdio_read_link(struct mii_phy *phy)
{
struct net_device *ndev = phy->dev;
struct emac_instance *dev = netdev_priv(ndev);
struct phy_device *phy_dev = dev->phy_dev;
int res;
res = phy_read_status(dev->phy_dev);
res = phy_read_status(phy_dev);
if (res)
return res;
dev->phy.speed = phy->speed;
dev->phy.duplex = phy->duplex;
dev->phy.pause = phy->pause;
dev->phy.asym_pause = phy->asym_pause;
phy->speed = phy_dev->speed;
phy->duplex = phy_dev->duplex;
phy->pause = phy_dev->pause;
phy->asym_pause = phy_dev->asym_pause;
return 0;
}
......@@ -2546,13 +2548,6 @@ static int emac_mdio_init_phy(struct mii_phy *phy)
struct emac_instance *dev = netdev_priv(ndev);
phy_start(dev->phy_dev);
dev->phy.autoneg = phy->autoneg;
dev->phy.speed = phy->speed;
dev->phy.duplex = phy->duplex;
dev->phy.advertising = phy->advertising;
dev->phy.pause = phy->pause;
dev->phy.asym_pause = phy->asym_pause;
return phy_init_hw(dev->phy_dev);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册