usb: dwc2: gadget: handle reset interrupt before endpoint interrupts

If system is loaded, reset, enum-done and setup interrupts can occur
at the same time. Current interrupt handling sequence will handle
setup packet's interrupt before handling reset interrupt. Which will
break the enumeration process. Correct sequence is to handle reset,
enum-done and then any other endpoint interrupts.
Signed-off-by: NMian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: NRobert Baldyga <r.baldyga@samsung.com>
Tested-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: NJohn Youn <johnyoun@synopsys.com>
Acked-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/dwc2/gadget.c

@@ -2460,6 +2460,36 @@ static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
 
 	gintsts &= gintmsk;
 
+	if (gintsts & GINTSTS_RESETDET) {
+		dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__);
+
+		dwc2_writel(GINTSTS_RESETDET, hsotg->regs + GINTSTS);
+
+		/* This event must be used only if controller is suspended */
+		if (hsotg->lx_state == DWC2_L2) {
+			dwc2_exit_hibernation(hsotg, true);
+			hsotg->lx_state = DWC2_L0;
+		}
+	}
+
+	if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
+
+		u32 usb_status = dwc2_readl(hsotg->regs + GOTGCTL);
+		u32 connected = hsotg->connected;
+
+		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
+		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
+			dwc2_readl(hsotg->regs + GNPTXSTS));
+
+		dwc2_writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
+
+		/* Report disconnection if it is not already done. */
+		dwc2_hsotg_disconnect(hsotg);
+
+		if (usb_status & GOTGCTL_BSESVLD && connected)
+			dwc2_hsotg_core_init_disconnected(hsotg, true);
+	}
+
 	if (gintsts & GINTSTS_ENUMDONE) {
 		dwc2_writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
 
@@ -2491,36 +2521,6 @@ static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
 		}
 	}
 
-	if (gintsts & GINTSTS_RESETDET) {
-		dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__);
-
-		dwc2_writel(GINTSTS_RESETDET, hsotg->regs + GINTSTS);
-
-		/* This event must be used only if controller is suspended */
-		if (hsotg->lx_state == DWC2_L2) {
-			dwc2_exit_hibernation(hsotg, true);
-			hsotg->lx_state = DWC2_L0;
-		}
-	}
-
-	if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
-
-		u32 usb_status = dwc2_readl(hsotg->regs + GOTGCTL);
-		u32 connected = hsotg->connected;
-
-		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
-		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
-			dwc2_readl(hsotg->regs + GNPTXSTS));
-
-		dwc2_writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
-
-		/* Report disconnection if it is not already done. */
-		dwc2_hsotg_disconnect(hsotg);
-
-		if (usb_status & GOTGCTL_BSESVLD && connected)
-			dwc2_hsotg_core_init_disconnected(hsotg, true);
-	}
-
 	/* check both FIFOs */
 
 	if (gintsts & GINTSTS_NPTXFEMP) {