wifi: rtw89: pci: fix PCI PHY auto adaption by using software restore

There is chance that PCI PHY auto adaption fail. When first time boot up,
software restore the right adaption value and close PHY auto adaption
mechanism.
Signed-off-by: NChia-Yuan Li <leo.li@realtek.com>
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-4-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/pci.c

@@ -3221,6 +3221,76 @@ static void rtw89_pci_free_irq(struct rtw89_dev *rtwdev,
 	pci_free_irq_vectors(pdev);
 }
 
+static u16 gray_code_to_bin(u16 gray_code, u32 bit_num)
+{
+	u16 bin = 0, gray_bit;
+	u32 bit_idx;
+
+	for (bit_idx = 0; bit_idx < bit_num; bit_idx++) {
+		gray_bit = (gray_code >> bit_idx) & 0x1;
+		if (bit_num - bit_idx > 1)
+			gray_bit ^= (gray_code >> (bit_idx + 1)) & 0x1;
+		bin |= (gray_bit << bit_idx);
+	}
+
+	return bin;
+}
+
+static int rtw89_pci_filter_out(struct rtw89_dev *rtwdev)
+{
+	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
+	struct pci_dev *pdev = rtwpci->pdev;
+	u16 val16, filter_out_val;
+	u32 val, phy_offset;
+	int ret;
+
+	if (rtwdev->chip->chip_id != RTL8852C)
+		return 0;
+
+	val = rtw89_read32_mask(rtwdev, R_AX_PCIE_MIX_CFG_V1, B_AX_ASPM_CTRL_MASK);
+	if (val == B_AX_ASPM_CTRL_L1)
+		return 0;
+
+	ret = pci_read_config_dword(pdev, RTW89_PCIE_L1_STS_V1, &val);
+	if (ret)
+		return ret;
+
+	val = FIELD_GET(RTW89_BCFG_LINK_SPEED_MASK, val);
+	if (val == RTW89_PCIE_GEN1_SPEED) {
+		phy_offset = R_RAC_DIRECT_OFFSET_G1;
+	} else if (val == RTW89_PCIE_GEN2_SPEED) {
+		phy_offset = R_RAC_DIRECT_OFFSET_G2;
+		val16 = rtw89_read16(rtwdev, phy_offset + RAC_ANA10 * RAC_MULT);
+		rtw89_write16_set(rtwdev, phy_offset + RAC_ANA10 * RAC_MULT,
+				  val16 | B_PCIE_BIT_PINOUT_DIS);
+		rtw89_write16_set(rtwdev, phy_offset + RAC_ANA19 * RAC_MULT,
+				  val16 & ~B_PCIE_BIT_RD_SEL);
+
+		val16 = rtw89_read16_mask(rtwdev,
+					  phy_offset + RAC_ANA1F * RAC_MULT,
+					  FILTER_OUT_EQ_MASK);
+		val16 = gray_code_to_bin(val16, hweight16(val16));
+		filter_out_val = rtw89_read16(rtwdev, phy_offset + RAC_ANA24 *
+					      RAC_MULT);
+		filter_out_val &= ~REG_FILTER_OUT_MASK;
+		filter_out_val |= FIELD_PREP(REG_FILTER_OUT_MASK, val16);
+
+		rtw89_write16(rtwdev, phy_offset + RAC_ANA24 * RAC_MULT,
+			      filter_out_val);
+		rtw89_write16_set(rtwdev, phy_offset + RAC_ANA0A * RAC_MULT,
+				  B_BAC_EQ_SEL);
+		rtw89_write16_set(rtwdev,
+				  R_RAC_DIRECT_OFFSET_G1 + RAC_ANA0C * RAC_MULT,
+				  B_PCIE_BIT_PSAVE);
+	} else {
+		return -EOPNOTSUPP;
+	}
+	rtw89_write16_set(rtwdev, phy_offset + RAC_ANA0C * RAC_MULT,
+			  B_PCIE_BIT_PSAVE);
+
+	return 0;
+}
+
 static void rtw89_pci_clkreq_set(struct rtw89_dev *rtwdev, bool enable)
 {
 	int ret;
@@ -3665,6 +3735,7 @@ int rtw89_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_clear_resource;
 	}
 
+	rtw89_pci_filter_out(rtwdev);
 	rtw89_pci_link_cfg(rtwdev);
 	rtw89_pci_l1ss_cfg(rtwdev);
 

drivers/net/wireless/realtek/rtw89/pci.h

@@ -11,11 +11,18 @@
 #define MDIO_PG1_G1 1
 #define MDIO_PG0_G2 2
 #define MDIO_PG1_G2 3
+#define RAC_CTRL_PPR			0x00
+#define RAC_ANA0A			0x0A
+#define B_BAC_EQ_SEL			BIT(5)
+#define RAC_ANA0C			0x0C
+#define B_PCIE_BIT_PSAVE		BIT(15)
 #define RAC_ANA10			0x10
+#define B_PCIE_BIT_PINOUT_DIS		BIT(3)
 #define RAC_REG_REV2			0x1B
 #define BAC_CMU_EN_DLY_MASK		GENMASK(15, 12)
 #define PCIE_DPHY_DLY_25US		0x1
 #define RAC_ANA19			0x19
+#define B_PCIE_BIT_RD_SEL		BIT(2)
 #define RAC_ANA1F			0x1F
 #define RAC_ANA24			0x24
 #define B_AX_DEGLITCH			GENMASK(11, 8)
@@ -45,6 +52,16 @@
 #define B_AX_SEL_REQ_ENTR_L1		BIT(2)
 #define B_AX_SEL_REQ_EXIT_L1		BIT(0)
 
+#define R_AX_PCIE_MIX_CFG_V1		0x300C
+#define B_AX_ASPM_CTRL_L1		BIT(17)
+#define B_AX_ASPM_CTRL_L0		BIT(16)
+#define B_AX_ASPM_CTRL_MASK		GENMASK(17, 16)
+#define B_AX_XFER_PENDING_FW		BIT(11)
+#define B_AX_XFER_PENDING		BIT(10)
+#define B_AX_REQ_EXIT_L1		BIT(9)
+#define B_AX_REQ_ENTR_L1		BIT(8)
+#define B_AX_L1SUB_DISABLE		BIT(0)
+
 #define R_AX_PCIE_BG_CLR		0x303C
 #define B_AX_BG_CLR_ASYNC_M3		BIT(4)
 
@@ -88,7 +105,10 @@
 #define B_AX_PCIE_WDT_TIMER_S1_MASK GENMASK(31, 0)
 
 #define R_RAC_DIRECT_OFFSET_G1 0x3800
+#define FILTER_OUT_EQ_MASK GENMASK(14, 10)
 #define R_RAC_DIRECT_OFFSET_G2 0x3880
+#define REG_FILTER_OUT_MASK GENMASK(6, 2)
+#define RAC_MULT 2
 
 #define RTW89_PCI_WR_RETRY_CNT		20
 
@@ -505,6 +525,12 @@
 #define RTW89_PCI_MULTITAG		8
 
 /* PCIE CFG register */
+#define RTW89_PCIE_L1_STS_V1		0x80
+#define RTW89_BCFG_LINK_SPEED_MASK	GENMASK(19, 16)
+#define RTW89_PCIE_GEN1_SPEED		0x01
+#define RTW89_PCIE_GEN2_SPEED		0x02
+#define RTW89_PCIE_PHY_RATE		0x82
+#define RTW89_PCIE_PHY_RATE_MASK	GENMASK(1, 0)
 #define RTW89_PCIE_ASPM_CTRL		0x070F
 #define RTW89_L1DLY_MASK		GENMASK(5, 3)
 #define RTW89_L0DLY_MASK		GENMASK(2, 0)
@@ -516,8 +542,7 @@
 #define RTW89_PCIE_CLK_CTRL		0x0725
 #define RTW89_PCIE_RST_MSTATE		0x0B48
 #define RTW89_PCIE_BIT_CFG_RST_MSTATE	BIT(0)
-#define RTW89_PCIE_PHY_RATE		0x82
-#define RTW89_PCIE_PHY_RATE_MASK	GENMASK(1, 0)
+
 #define INTF_INTGRA_MINREF_V1	90
 #define INTF_INTGRA_HOSTREF_V1	100
 

drivers/net/wireless/realtek/rtw89/reg.h

@@ -143,6 +143,18 @@
 #define R_AX_PMC_DBG_CTRL2 0x00CC
 #define B_AX_SYSON_DIS_PMCR_AX_WRMSK BIT(2)
 
+#define R_AX_PCIE_MIO_INTF 0x00E4
+#define B_AX_PCIE_MIO_ADDR_PAGE_V1_MASK GENMASK(20, 16)
+#define B_AX_PCIE_MIO_BYIOREG BIT(13)
+#define B_AX_PCIE_MIO_RE BIT(12)
+#define B_AX_PCIE_MIO_WE_MASK GENMASK(11, 8)
+#define MIO_WRITE_BYTE_ALL 0xF
+#define B_AX_PCIE_MIO_ADDR_MASK GENMASK(7, 0)
+#define MIO_ADDR_PAGE_MASK GENMASK(12, 8)
+
+#define R_AX_PCIE_MIO_INTD 0x00E8
+#define B_AX_PCIE_MIO_DATA_MASK GENMASK(31, 0)
+
 #define R_AX_SYS_CFG1 0x00F0
 #define B_AX_CHIP_VER_MASK GENMASK(15, 12)