iwlwifi: setup correctly L1 L0S pi link values

This patch setups L1 L0S pci link values.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/iwlwifi/iwl-4965-hw.h

@@ -100,9 +100,14 @@
 
 #include "iwl-commands.h"
 
-#define PCI_LINK_CTRL      0x0F0
+/* PCI registers */
+#define PCI_LINK_CTRL      0x0F0	/* 1 byte */
 #define PCI_POWER_SOURCE   0x0C8
 #define PCI_REG_WUM8       0x0E8
+
+/* PCI register values */
+#define PCI_LINK_VAL_L0S_EN	0x01
+#define PCI_LINK_VAL_L1_EN	0x02
 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT         (0x80000000)
 
 #define TFD_QUEUE_SIZE_MAX      (256)

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -496,6 +496,10 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
 
+	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
+	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
 	/* set "initialization complete" bit to move adapter
 	 * D0U* --> D0A* state */
 	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
@@ -514,11 +518,12 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
 		goto out;
 
 	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG,
-			APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
+	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
+						APMG_CLK_VAL_BSM_CLK_RQT);
 
 	udelay(20);
 
+	/* disable L1-Active */
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
@@ -546,8 +551,13 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
 
 	pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
 
-	/* disable L1 entry -- workaround for pre-B1 */
-	pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
+	/* L1 is enabled by BIOS */
+	if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
+		/* diable L0S disabled L1A enabled */
+		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+	else
+		/* L0S enabled L1A disabled */
+		iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 
 	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -63,6 +63,10 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 		    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
 
+	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
+	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+		    CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
 	iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 
 	/* set "initialization complete" bit to move adapter
@@ -83,13 +87,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 		return ret;
 
 	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG,
-			APMG_CLK_VAL_DMA_CLK_RQT);
+	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 
 	udelay(20);
 
+	/* disable L1-Active */
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
 	iwl_release_nic_access(priv);
 
@@ -106,8 +110,13 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 
 	pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
 
-	/* disable L1 entry -- workaround for pre-B1 */
-	pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
+	/* L1 is enabled by BIOS */
+	if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
+		/* diable L0S disabled L1A enabled */
+		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+	else
+		/* L0S enabled L1A disabled */
+		iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 
 	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 

drivers/net/wireless/iwlwifi/iwl-csr.h

@@ -87,13 +87,14 @@
 /* EEPROM reads */
 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
+#define CSR_GIO_REG		(CSR_BASE+0x03C)
 #define CSR_GP_UCODE		(CSR_BASE+0x044)
 #define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
 #define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
-#define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
 #define CSR_LED_REG             (CSR_BASE+0x094)
+#define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
 
 /* Analog phase-lock-loop configuration  */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
@@ -213,6 +214,9 @@
 #define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
 
+/* CSR GIO */
+#define CSR_GIO_REG_VAL_L0S_ENABLED	(0x00000002)
+
 /* UCODE DRV GP */
 #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP             (0x00000001)
 #define CSR_UCODE_SW_BIT_RFKILL                     (0x00000002)