提交 8d20b2ea 编写于 作者: K Kishon Vijay Abraham I 提交者: Ulf Hansson

mmc: sdhci_omap: Add support to set IODELAY values

The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met.

Add support to set the IODELAY values depending on the various MMC
modes using the pinctrl APIs.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
上级 7d33c358
......@@ -25,6 +25,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include "sdhci-pltfm.h"
......@@ -90,8 +91,12 @@
#define MAX_PHASE_DELAY 0x7C
/* sdhci-omap controller flags */
#define SDHCI_OMAP_REQUIRE_IODELAY BIT(0)
struct sdhci_omap_data {
u32 offset;
u8 flags;
};
struct sdhci_omap_host {
......@@ -102,8 +107,16 @@ struct sdhci_omap_host {
struct sdhci_host *host;
u8 bus_mode;
u8 power_mode;
u8 timing;
u8 flags;
struct pinctrl *pinctrl;
struct pinctrl_state **pinctrl_state;
};
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
static void sdhci_omap_stop_clock(struct sdhci_omap_host *omap_host);
static inline u32 sdhci_omap_readl(struct sdhci_omap_host *host,
unsigned int offset)
{
......@@ -436,6 +449,31 @@ static int sdhci_omap_start_signal_voltage_switch(struct mmc_host *mmc,
return 0;
}
static void sdhci_omap_set_timing(struct sdhci_omap_host *omap_host, u8 timing)
{
int ret;
struct pinctrl_state *pinctrl_state;
struct device *dev = omap_host->dev;
if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
return;
if (omap_host->timing == timing)
return;
sdhci_omap_stop_clock(omap_host);
pinctrl_state = omap_host->pinctrl_state[timing];
ret = pinctrl_select_state(omap_host->pinctrl, pinctrl_state);
if (ret) {
dev_err(dev, "failed to select pinctrl state\n");
return;
}
sdhci_omap_start_clock(omap_host);
omap_host->timing = timing;
}
static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
u8 power_mode)
{
......@@ -472,6 +510,7 @@ static void sdhci_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
omap_host = sdhci_pltfm_priv(pltfm_host);
sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
sdhci_omap_set_timing(omap_host, ios->timing);
sdhci_set_ios(mmc, ios);
sdhci_omap_set_power_mode(omap_host, ios->power_mode);
}
......@@ -680,6 +719,7 @@ static const struct sdhci_pltfm_data sdhci_omap_pdata = {
static const struct sdhci_omap_data dra7_data = {
.offset = 0x200,
.flags = SDHCI_OMAP_REQUIRE_IODELAY,
};
static const struct of_device_id omap_sdhci_match[] = {
......@@ -688,6 +728,108 @@ static const struct of_device_id omap_sdhci_match[] = {
};
MODULE_DEVICE_TABLE(of, omap_sdhci_match);
static struct pinctrl_state
*sdhci_omap_iodelay_pinctrl_state(struct sdhci_omap_host *omap_host, char *mode,
u32 *caps, u32 capmask)
{
struct device *dev = omap_host->dev;
struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
if (!(*caps & capmask))
goto ret;
pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
if (IS_ERR(pinctrl_state)) {
dev_err(dev, "no pinctrl state for %s mode", mode);
*caps &= ~capmask;
}
ret:
return pinctrl_state;
}
static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
*omap_host)
{
struct device *dev = omap_host->dev;
struct sdhci_host *host = omap_host->host;
struct mmc_host *mmc = host->mmc;
u32 *caps = &mmc->caps;
u32 *caps2 = &mmc->caps2;
struct pinctrl_state *state;
struct pinctrl_state **pinctrl_state;
if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
return 0;
pinctrl_state = devm_kzalloc(dev, sizeof(*pinctrl_state) *
(MMC_TIMING_MMC_HS200 + 1), GFP_KERNEL);
if (!pinctrl_state)
return -ENOMEM;
omap_host->pinctrl = devm_pinctrl_get(omap_host->dev);
if (IS_ERR(omap_host->pinctrl)) {
dev_err(dev, "Cannot get pinctrl\n");
return PTR_ERR(omap_host->pinctrl);
}
state = pinctrl_lookup_state(omap_host->pinctrl, "default");
if (IS_ERR(state)) {
dev_err(dev, "no pinctrl state for default mode\n");
return PTR_ERR(state);
}
pinctrl_state[MMC_TIMING_LEGACY] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr104", caps,
MMC_CAP_UHS_SDR104);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_UHS_SDR104] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr50", caps,
MMC_CAP_UHS_DDR50);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_UHS_DDR50] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr50", caps,
MMC_CAP_UHS_SDR50);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_UHS_SDR50] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr25", caps,
MMC_CAP_UHS_SDR25);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_UHS_SDR25] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr12", caps,
MMC_CAP_UHS_SDR12);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_UHS_SDR12] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_1_8v", caps,
MMC_CAP_1_8V_DDR);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
MMC_CAP_SD_HIGHSPEED);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_SD_HS] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
MMC_CAP_MMC_HIGHSPEED);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_MMC_HS] = state;
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs200_1_8v", caps2,
MMC_CAP2_HS200_1_8V_SDR);
if (!IS_ERR(state))
pinctrl_state[MMC_TIMING_MMC_HS200] = state;
omap_host->pinctrl_state = pinctrl_state;
return 0;
}
static int sdhci_omap_probe(struct platform_device *pdev)
{
int ret;
......@@ -724,6 +866,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
omap_host->base = host->ioaddr;
omap_host->dev = dev;
omap_host->power_mode = MMC_POWER_UNDEFINED;
omap_host->timing = MMC_TIMING_LEGACY;
omap_host->flags = data->flags;
host->ioaddr += offset;
mmc = host->mmc;
......@@ -772,6 +916,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
goto err_put_sync;
}
ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
if (ret)
goto err_put_sync;
host->mmc_host_ops.get_ro = mmc_gpio_get_ro;
host->mmc_host_ops.start_signal_voltage_switch =
sdhci_omap_start_signal_voltage_switch;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册