提交 8c998b2a 编写于 作者: A Aaron Wu 提交者: Bob Liu

blackfin: bf537-stamp: update board file for platform bfin_sport device

Blackfin sport driver has been rewrited update board file according.
Signed-off-by: NAaron Wu <Aaron.Wu@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>
上级 c5cfb736
......@@ -24,6 +24,7 @@
struct sport_config {
/* TDM (multichannels), I2S or other mode */
unsigned int mode:3;
unsigned int polled; /* use poll instead of irq when set */
/* if TDM mode is selected, channels must be set */
int channels; /* Must be in 8 units */
......
......@@ -2361,7 +2361,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
......@@ -2382,11 +2388,6 @@ static struct resource bfin_sport0_uart_resources[] = {
},
};
static unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
};
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
......@@ -2432,7 +2433,49 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
#endif
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
.end = SPORT0_MRCS3+4,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_SPORT0_RX,
.end = IRQ_SPORT0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_SPORT0_TX,
.end = IRQ_SPORT0_TX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_SPORT0_ERROR,
.end = IRQ_SPORT0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_SPORT0_TX,
.end = CH_SPORT0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_SPORT0_RX,
.end = CH_SPORT0_RX,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sport0_device = {
.name = "bfin_sport_raw",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_sport0_resources),
.resource = bfin_sport0_resources,
.dev = {
.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
},
};
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
......@@ -2754,7 +2797,9 @@ static struct platform_device bf5xx_adau1701_device = {
static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
&bfin_sport0_device,
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册