staging: panel: panel.c: Fixed coding style issues

Fixed warnings reported by checkpatch.pl:
 - Block comments use a trailing */ on a separate line
 - Block comments use * on subsequent lines
Signed-off-by: NNayeemahmed Badebade <itachi.opsrc@gmail.com>
Acked-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/panel/panel.c

@@ -909,8 +909,10 @@ static void lcd_gotoxy(void)
 {
 	lcd_write_cmd(LCD_CMD_SET_DDRAM_ADDR
 		      | (lcd.addr.y ? lcd.hwidth : 0)
-		      /* we force the cursor to stay at the end of the
-			 line if it wants to go farther */
+		      /*
+		       * we force the cursor to stay at the end of the
+		       * line if it wants to go farther
+		       */
 		      | ((lcd.addr.x < lcd.bwidth) ? lcd.addr.x &
 			 (lcd.hwidth - 1) : lcd.bwidth - 1));
 }
@@ -1294,8 +1296,10 @@ static inline int handle_lcd_special_code(void)
 			if (lcd.flags & (LCD_FLAG_L))
 				lcd_backlight(1);
 			else if (lcd.light_tempo == 0)
-				/* switch off the light only when the tempo
-				   lighting is gone */
+				/*
+				 * switch off the light only when the tempo
+				 * lighting is gone
+				 */
 				lcd_backlight(0);
 		}
 	}
@@ -1323,8 +1327,10 @@ static void lcd_write_char(char c)
 		case '\b':
 			/* go back one char and clear it */
 			if (lcd.addr.x > 0) {
-				/* check if we're not at the
-				   end of the line */
+				/*
+				 * check if we're not at the
+				 * end of the line
+				 */
 				if (lcd.addr.x < lcd.bwidth)
 					/* back one char */
 					lcd_write_cmd(LCD_CMD_SHIFT);
@@ -1340,8 +1346,10 @@ static void lcd_write_char(char c)
 			lcd_clear_fast();
 			break;
 		case '\n':
-			/* flush the remainder of the current line and
-			   go to the beginning of the next line */
+			/*
+			 * flush the remainder of the current line and
+			 * go to the beginning of the next line
+			 */
 			for (; lcd.addr.x < lcd.bwidth; lcd.addr.x++)
 				lcd_write_data(' ');
 			lcd.addr.x = 0;
@@ -1364,8 +1372,10 @@ static void lcd_write_char(char c)
 		}
 	}
 
-	/* now we'll see if we're in an escape mode and if the current
-	   escape sequence can be understood. */
+	/*
+	 * now we'll see if we're in an escape mode and if the current
+	 * escape sequence can be understood.
+	 */
 	if (lcd.esc_seq.len >= 2) {
 		int processed = 0;
 
@@ -1388,8 +1398,10 @@ static void lcd_write_char(char c)
 		}
 
 		/* LCD special escape codes */
-		/* flush the escape sequence if it's been processed
-		   or if it is getting too long. */
+		/*
+		 * flush the escape sequence if it's been processed
+		 * or if it is getting too long.
+		 */
 		if (processed || (lcd.esc_seq.len >= LCD_ESCAPE_LEN))
 			lcd.esc_seq.len = -1;
 	} /* escape codes */
@@ -1403,8 +1415,10 @@ static ssize_t lcd_write(struct file *file,
 
 	for (; count-- > 0; (*ppos)++, tmp++) {
 		if (!in_interrupt() && (((count + 1) & 0x1f) == 0))
-			/* let's be a little nice with other processes
-			   that need some CPU */
+			/*
+			 * let's be a little nice with other processes
+			 * that need some CPU
+			 */
 			schedule();
 
 		if (get_user(c, tmp))
@@ -1459,8 +1473,10 @@ static void panel_lcd_print(const char *s)
 	if (lcd.enabled && lcd.initialized) {
 		for (; count-- > 0; tmp++) {
 			if (!in_interrupt() && (((count + 1) & 0x1f) == 0))
-				/* let's be a little nice with other processes
-				   that need some CPU */
+				/*
+				 * let's be a little nice with other processes
+				 * that need some CPU
+				 */
 				schedule();
 
 			lcd_write_char(*tmp);
@@ -1634,9 +1650,11 @@ static void lcd_init(void)
 	pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
 		    lcd_bits[LCD_PORT_C][LCD_BIT_DA]);
 
-	/* before this line, we must NOT send anything to the display.
+	/*
+	 * before this line, we must NOT send anything to the display.
 	 * Since lcd_init_display() needs to write data, we have to
-	 * enable mark the LCD initialized just before. */
+	 * enable mark the LCD initialized just before.
+	 */
 	lcd.initialized = true;
 	lcd_init_display();
 
@@ -1770,7 +1788,8 @@ static void phys_scan_contacts(void)
 	phys_read |= (pmask_t) gndmask << 40;
 
 	if (bitmask != gndmask) {
-		/* since clearing the outputs changed some inputs, we know
+		/*
+		 * since clearing the outputs changed some inputs, we know
 		 * that some input signals are currently tied to some outputs.
 		 * So we'll scan them.
 		 */
@@ -1786,8 +1805,10 @@ static void phys_scan_contacts(void)
 		}
 		w_dtr(pprt, oldval);	/* disable all outputs */
 	}
-	/* this is easy: use old bits when they are flapping,
-	 * use new ones when stable */
+	/*
+	 * this is easy: use old bits when they are flapping,
+	 * use new ones when stable
+	 */
 	phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) |
 		    (phys_read & ~(phys_read ^ phys_read_prev));
 }