mlxsw: reg: QEEC: Add minimum shaper fields

Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable
configuration of minimum shaper.

Increase the QEEC length to 0x20 as well: that's the length that the
register has had for a long time now, but with the configurations that
mlxsw typically exercises, the firmware tolerated 0x1C-sized packets.
With mise=true however, FW rejects packets unless they have the full
required length.

Fixes: b9b7cee4 ("mlxsw: reg: Add QoS ETS Element Configuration register")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -3284,7 +3284,7 @@ static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port,
  * Configures the ETS elements.
  */
 #define MLXSW_REG_QEEC_ID 0x400D
-#define MLXSW_REG_QEEC_LEN 0x1C
+#define MLXSW_REG_QEEC_LEN 0x20
 
 MLXSW_REG_DEFINE(qeec, MLXSW_REG_QEEC_ID, MLXSW_REG_QEEC_LEN);
 
@@ -3326,6 +3326,15 @@ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8);
  */
 MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8);
 
+/* reg_qeec_mise
+ * Min shaper configuration enable. Enables configuration of the min
+ * shaper on this ETS element
+ * 0 - Disable
+ * 1 - Enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1);
+
 enum {
 	MLXSW_REG_QEEC_BYTES_MODE,
 	MLXSW_REG_QEEC_PACKETS_MODE,
@@ -3342,6 +3351,17 @@ enum {
  */
 MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1);
 
+/* The smallest permitted min shaper rate. */
+#define MLXSW_REG_QEEC_MIS_MIN	200000		/* Kbps */
+
+/* reg_qeec_min_shaper_rate
+ * Min shaper information rate.
+ * For CPU port, can only be configured for port hierarchy.
+ * When in bytes mode, value is specified in units of 1000bps.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, min_shaper_rate, 0x0C, 0, 28);
+
 /* reg_qeec_mase
  * Max shaper configuration enable. Enables configuration of the max
  * shaper on this ETS element.