Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...

Documentation/devicetree/bindings/gpio/sifive,gpio.yaml

@@ -13,7 +13,10 @@ maintainers:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-gpio
+      - enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+          - canaan,k210-gpiohs
       - const: sifive,gpio0
 
   reg:
@@ -21,9 +24,9 @@ properties:
 
   interrupts:
     description:
-      interrupt mapping one per GPIO. Maximum 16 GPIOs.
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
     minItems: 1
-    maxItems: 16
+    maxItems: 32
 
   interrupt-controller: true
 
@@ -36,6 +39,14 @@ properties:
   "#gpio-cells":
     const: 2
 
+  ngpios:
+    description:
+      The number of GPIOs available on the controller implementation.
+      It is 16 for the SiFive SoCs and 32 for the Canaan K210.
+    minimum: 1
+    maximum: 32
+    default: 16
+
   gpio-controller: true
 
 required:
@@ -44,10 +55,20 @@ required:
   - interrupts
   - interrupt-controller
   - "#interrupt-cells"
-  - clocks
   - "#gpio-cells"
   - gpio-controller
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+then:
+  required:
+    - clocks
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml

@@ -8,10 +8,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive Platform-Level Interrupt Controller (PLIC)
 
 description:
-  SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
-  (PLIC) high-level specification in the RISC-V Privileged Architecture
-  specification. The PLIC connects all external interrupts in the system to all
-  hart contexts in the system, via the external interrupt source in each hart.
+  SiFive SoCs and other RISC-V SoCs include an implementation of the
+  Platform-Level Interrupt Controller (PLIC) high-level specification in
+  the RISC-V Privileged Architecture specification. The PLIC connects all
+  external interrupts in the system to all hart contexts in the system, via
+  the external interrupt source in each hart.
 
   A hart context is a privilege mode in a hardware execution thread. For example,
   in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
@@ -42,7 +43,9 @@ maintainers:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-plic
+      - enum:
+          - sifive,fu540-c000-plic
+          - canaan,k210-plic
       - const: sifive,plic-1.0.0
 
   reg:

Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 System Controller Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  Canaan Inc. Kendryte K210 SoC system controller which provides a
+  register map for controlling the clocks, reset signals and pin power
+  domains of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: canaan,k210-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  clocks:
+    maxItems: 1
+    description:
+      System controller Advanced Power Bus (APB) interface clock source.
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    # Child node
+    type: object
+    $ref: "../clock/canaan,k210-clk.yaml"
+    description:
+      Clock controller for the SoC clocks. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml.
+
+  reset-controller:
+    # Child node
+    type: object
+    $ref: "../reset/canaan,k210-rst.yaml"
+    description:
+      Reset controller for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml.
+
+  syscon-reboot:
+    # Child node
+    type: object
+    $ref: "../power/reset/syscon-reboot.yaml"
+    description:
+      Reboot method for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml.
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    clocks {
+      in0: oscllator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    sysctl: syscon@50440000 {
+      compatible = "canaan,k210-sysctl",
+                   "syscon", "simple-mfd";
+      reg = <0x50440000 0x100>;
+      clocks = <&sysclk K210_CLK_APB1>;
+      clock-names = "pclk";
+
+      sysclk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "canaan,k210-clk";
+        clocks = <&in0>;
+      };
+
+      sysrst: reset-controller {
+        compatible = "canaan,k210-rst";
+        #reset-cells = <1>;
+      };
+
+      reboot: syscon-reboot {
+        compatible = "syscon-reboot";
+        regmap = <&sysctl>;
+        offset = <48>;
+        mask = <1>;
+        value = <1>;
+      };
+    };

Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 FPIOA Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
+  controller allows assiging any of 256 possible functions to any of
+  48 IO pins of the SoC. Pin function configuration is performed on
+  a per-pin basis.
+
+properties:
+  compatible:
+    const: canaan,k210-fpioa
+
+  reg:
+    maxItems: 1
+    description:
+      Address and length of the register set for the FPIOA controller.
+
+  clocks:
+    items:
+      - description: Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  canaan,k210-sysctl-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      phandle of the K210 system controller node and offset of its
+      power domain control register.
+
+patternProperties:
+  '-pinmux$':
+    type: object
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired pin
+      configuration. Client device sub-nodes use the pinux property
+      below.
+
+    properties:
+      pinmux:
+        description:
+          List of IO pins alternate functions. The values for each IO
+          pin is a combination of an IO pin number (0 to 47) with the
+          desired function for the IO pin. Functions are defined as
+          macros in include/dt-bindings/pinctrl/k210-fpioa.h.
+          The K210_FPIOA(IO pin, function) macro is provided to
+          facilitate the combination of IO pin numbers and functions.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+  '-pins$':
+    type: object
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired
+      configuration of pins. Client device sub-nodes use the
+      properties below.
+
+    properties:
+      pins:
+        description:
+          List of IO pins affected by the properties specified in this
+          subnode. IO pins are identified using the pin names "IO_xx".
+          Pin configuration nodes can also define the power domain to
+          be used for the SoC pin groups A0 (IO pins 0-5),
+          A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
+          B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
+          C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
+          power-source property.
+        items:
+          anyOf:
+            - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
+            - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
+                      IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
+                      IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
+                      IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
+                      IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
+                      IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
+                      IO_43, IO_44, IO_45, IO_46, IO_47,
+                      A0, A1, A2, B3, B4, B5, C6, C7 ]
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength: true
+
+      drive-strength-microamp: true
+
+      input-enable: true
+
+      input-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      input-polarity-invert:
+        description:
+          Enable or disable pin input polarity inversion.
+
+      output-enable: true
+
+      output-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      output-polarity-invert:
+        description:
+          Enable or disable pin output polarity inversion.
+
+      slew-rate: true
+
+      power-source: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - canaan,k210-sysctl-power
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/k210-fpioa.h>
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    fpioa: pinmux@502B0000 {
+      compatible = "canaan,k210-fpioa";
+      reg = <0x502B0000 0x100>;
+      clocks = <&sysclk K210_CLK_FPIOA>,
+               <&sysclk K210_CLK_APB0>;
+      clock-names = "ref", "pclk";
+      resets = <&sysrst K210_RST_FPIOA>;
+      canaan,k210-sysctl-power = <&sysctl 108>;
+      pinctrl-0 = <&jtag_pinctrl>;
+      pinctrl-names = "default";
+
+      jtag_pinctrl: jtag-pinmux {
+        pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+                 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+                 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+                 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+      };
+    };

Documentation/devicetree/bindings/pwm/pwm-sifive.yaml

@@ -25,12 +25,15 @@ description:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-pwm
+      - enum:
+          - sifive,fu540-c000-pwm
+          - sifive,fu740-c000-pwm
       - const: sifive,pwm0
     description:
       Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported
-      compatible strings are "sifive,fu540-c000-pwm" for the SiFive PWM v0
-      as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the
+      compatible strings are "sifive,fu540-c000-pwm" and
+      "sifive,fu740-c000-pwm" for the SiFive PWM v0 as integrated onto the
+      SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the
       SiFive PWM v0 IP block with no chip integration tweaks.
       Please refer to sifive-blocks-ip-versioning.txt for details.
 

Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Reset Controller Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Canaan Kendryte K210 reset controller driver which supports the SoC
+  system controller supplied reset registers for the various peripherals
+  of the SoC. The K210 reset controller node must be defined as a child
+  node of the K210 system controller node.
+
+  See also:
+  - dt-bindings/reset/k210-rst.h
+
+properties:
+  compatible:
+    const: canaan,k210-rst
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - '#reset-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/k210-rst.h>
+    sysrst: reset-controller {
+      compatible = "canaan,k210-rst";
+      #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/riscv/canaan.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/canaan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan SoC-based boards
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  Canaan Kendryte K210 SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: sipeed,maix-bit
+          - const: sipeed,maix-bitm
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-go
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-dock-m1
+          - const: sipeed,maix-dock-m1w
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maixduino
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-kd233
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-k210
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -28,11 +28,18 @@ properties:
       - items:
           - enum:
               - sifive,rocket0
+              - sifive,bullet0
               - sifive,e5
+              - sifive,e7
               - sifive,e51
+              - sifive,e71
               - sifive,u54-mc
+              - sifive,u74-mc
               - sifive,u54
+              - sifive,u74
               - sifive,u5
+              - sifive,u7
+              - canaan,k210
           - const: riscv
       - const: riscv    # Simulator only
     description:
@@ -50,6 +57,7 @@ properties:
       - riscv,sv32
       - riscv,sv39
       - riscv,sv48
+      - riscv,none
 
   riscv,isa:
     description:

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -27,6 +27,7 @@ select:
       items:
         - enum:
             - sifive,fu540-c000-ccache
+            - sifive,fu740-c000-ccache
 
   required:
     - compatible
@@ -34,7 +35,9 @@ select:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-ccache
+      - enum:
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
       - const: cache
 
   cache-block-size:
@@ -52,10 +55,13 @@ properties:
   cache-unified: true
 
   interrupts:
-    description: |
-      Must contain entries for DirError, DataError and DataFail signals.
     minItems: 3
-    maxItems: 3
+    maxItems: 4
+    items:
+      - description: DirError interrupt
+      - description: DataError interrupt
+      - description: DataFail interrupt
+      - description: DirFail interrupt
 
   reg:
     maxItems: 1
@@ -68,6 +74,26 @@ properties:
       The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
       The reserved memory node should be defined as per the bindings in reserved-memory.txt.
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: sifive,fu540-c000-ccache
+
+then:
+  properties:
+    interrupts:
+      description: |
+        Must contain entries for DirError, DataError and DataFail signals.
+      maxItems: 3
+
+else:
+  properties:
+    interrupts:
+      description: |
+        Must contain entries for DirError, DataError, DataFail, DirFail signals.
+      minItems: 4
+
 additionalProperties: false
 
 required:

Documentation/devicetree/bindings/riscv/sifive.yaml

@@ -17,11 +17,18 @@ properties:
   $nodename:
     const: '/'
   compatible:
-    items:
-      - enum:
-          - sifive,hifive-unleashed-a00
-      - const: sifive,fu540-c000
-      - const: sifive,fu540
+    oneOf:
+      - items:
+          - enum:
+              - sifive,hifive-unleashed-a00
+          - const: sifive,fu540-c000
+          - const: sifive,fu540
+
+      - items:
+          - enum:
+              - sifive,hifive-unmatched-a00
+          - const: sifive,fu740-c000
+          - const: sifive,fu740
 
 additionalProperties: true
 

Documentation/devicetree/bindings/serial/sifive-serial.yaml

@@ -20,6 +20,7 @@ properties:
       - enum:
           - sifive,fu540-c000-uart
           - sifive,fu740-c000-uart
+          - canaan,k210-uarths
       - const: sifive,uart0
 
     description:

Documentation/devicetree/bindings/timer/sifive,clint.yaml

@@ -23,15 +23,19 @@ description:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-clint
+      - enum:
+          - sifive,fu540-c000-clint
+          - canaan,k210-clint
       - const: sifive,clint0
 
     description:
-      Should be "sifive,<chip>-clint" and "sifive,clint<version>".
+      Should be "<vendor>,<chip>-clint" and "sifive,clint<version>".
       Supported compatible strings are -
       "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
-      onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive
-      CLINT v0 IP block with no chip integration tweaks.
+      onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive
+      CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and
+      "sifive,clint0" for the SiFive CLINT v0 IP block with no chip
+      integration tweaks.
       Please refer to sifive-blocks-ip-versioning.txt for details
 
   reg:

Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml

@@ -24,6 +24,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   clocks:
     minItems: 1
     items:

MAINTAINERS

@@ -3855,6 +3855,29 @@ W:	https://github.com/Cascoda/ca8210-linux.git
 F:	Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
 F:	drivers/net/ieee802154/ca8210.c
 
+CANAAN/KENDRYTE K210 SOC FPIOA DRIVER
+M:	Damien Le Moal <damien.lemoal@wdc.com>
+L:	linux-riscv@lists.infradead.org
+L:	linux-gpio@vger.kernel.org (pinctrl driver)
+F:	Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
+F:	drivers/pinctrl/pinctrl-k210.c
+
+CANAAN/KENDRYTE K210 SOC RESET CONTROLLER DRIVER
+M:	Damien Le Moal <damien.lemoal@wdc.com>
+L:	linux-kernel@vger.kernel.org
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
+F:	drivers/reset/reset-k210.c
+
+CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER
+M:	Damien Le Moal <damien.lemoal@wdc.com>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:      Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+F:	drivers/soc/canaan/
+F:	include/soc/canaan/
+
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com (moderated for non-subscribers)

arch/arm64/Kconfig

@@ -999,6 +999,7 @@ config HOTPLUG_CPU
 # Common NUMA Features
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
+	select GENERIC_ARCH_NUMA
 	select ACPI_NUMA if ACPI
 	select OF_NUMA
 	help

arch/arm64/include/asm/numa.h

@@ -3,52 +3,6 @@
 #define __ASM_NUMA_H
 
 #include <asm/topology.h>
-
-#ifdef CONFIG_NUMA
-
-#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
-
-int __node_distance(int from, int to);
-#define node_distance(a, b) __node_distance(a, b)
-
-extern nodemask_t numa_nodes_parsed __initdata;
-
-extern bool numa_off;
-
-/* Mappings between node number and cpus on that node. */
-extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
-void numa_clear_node(unsigned int cpu);
-
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-const struct cpumask *cpumask_of_node(int node);
-#else
-/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
-static inline const struct cpumask *cpumask_of_node(int node)
-{
-	if (node == NUMA_NO_NODE)
-		return cpu_all_mask;
-
-	return node_to_cpumask_map[node];
-}
-#endif
-
-void __init arm64_numa_init(void);
-int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-void __init numa_set_distance(int from, int to, int distance);
-void __init numa_free_distance(void);
-void __init early_map_cpu_to_node(unsigned int cpu, int nid);
-void numa_store_cpu_info(unsigned int cpu);
-void numa_add_cpu(unsigned int cpu);
-void numa_remove_cpu(unsigned int cpu);
-
-#else	/* CONFIG_NUMA */
-
-static inline void numa_store_cpu_info(unsigned int cpu) { }
-static inline void numa_add_cpu(unsigned int cpu) { }
-static inline void numa_remove_cpu(unsigned int cpu) { }
-static inline void arm64_numa_init(void) { }
-static inline void early_map_cpu_to_node(unsigned int cpu, int nid) { }
-
-#endif	/* CONFIG_NUMA */
+#include <asm-generic/numa.h>
 
 #endif	/* __ASM_NUMA_H */

arch/arm64/kernel/acpi_numa.c

@@ -118,15 +118,3 @@ void __init acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa)
 	node_set(node, numa_nodes_parsed);
 }
 
-int __init arm64_acpi_numa_init(void)
-{
-	int ret;
-
-	ret = acpi_numa_init();
-	if (ret) {
-		pr_info("Failed to initialise from firmware\n");
-		return ret;
-	}
-
-	return srat_disabled() ? -EINVAL : 0;
-}

arch/arm64/mm/Makefile

@@ -7,7 +7,6 @@ obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PTDUMP_CORE)	+= ptdump.o
 obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_TRANS_TABLE)	+= trans_pgd.o
-obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 obj-$(CONFIG_ARM64_MTE)		+= mteswap.o
 KASAN_SANITIZE_physaddr.o	+= n

arch/arm64/mm/init.c

@@ -416,10 +416,10 @@ void __init bootmem_init(void)
 	max_pfn = max_low_pfn = max;
 	min_low_pfn = min;
 
-	arm64_numa_init();
+	arch_numa_init();
 
 	/*
-	 * must be done after arm64_numa_init() which calls numa_init() to
+	 * must be done after arch_numa_init() which calls numa_init() to
 	 * initialize node_online_map that gets used in hugetlb_cma_reserve()
 	 * while allocating required CMA size across online nodes.
 	 */

arch/riscv/Kconfig

@@ -57,6 +57,7 @@ config RISCV
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KASAN if MMU && 64BIT
+	select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_KGDB_QXFER_PKT
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
@@ -67,14 +68,19 @@ config RISCV
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_EBPF_JIT if MMU
+	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO if MMU && 64BIT
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_KPROBES
+	select HAVE_KPROBES_ON_FTRACE
+	select HAVE_KRETPROBES
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
@@ -143,7 +149,7 @@ config PAGE_OFFSET
 	default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
 
 config ARCH_FLATMEM_ENABLE
-	def_bool y
+	def_bool !NUMA
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
@@ -156,6 +162,9 @@ config ARCH_SELECT_MEMORY_MODEL
 config ARCH_WANT_GENERAL_HUGETLB
 	def_bool y
 
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
 config SYS_SUPPORTS_HUGETLBFS
 	depends on MMU
 	def_bool y
@@ -302,6 +311,35 @@ config TUNE_GENERIC
 
 endchoice
 
+# Common NUMA Features
+config NUMA
+	bool "NUMA Memory Allocation and Scheduler Support"
+	select GENERIC_ARCH_NUMA
+	select OF_NUMA
+	select ARCH_SUPPORTS_NUMA_BALANCING
+	help
+	  Enable NUMA (Non-Uniform Memory Access) support.
+
+	  The kernel will try to allocate memory used by a CPU on the
+	  local memory of the CPU and add some more NUMA awareness to the kernel.
+
+config NODES_SHIFT
+	int "Maximum NUMA Nodes (as a power of 2)"
+	range 1 10
+	default "2"
+	depends on NEED_MULTIPLE_NODES
+	help
+	  Specify the maximum number of NUMA Nodes available on the target
+	  system.  Increases memory reserved to accommodate various tables.
+
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool y
+	depends on NUMA
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+	depends on NUMA
+
 config RISCV_ISA_C
 	bool "Emit compressed instructions when building Linux"
 	default y
@@ -416,11 +454,17 @@ config EFI
 	  allow the kernel to be booted as an EFI application. This
 	  is only useful on systems that have UEFI firmware.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	def_bool y
+	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
+
 endmenu
 
 config BUILTIN_DTB
 	def_bool n
-	depends on RISCV_M_MODE
 	depends on OF
 
 menu "Power management options"

arch/riscv/Kconfig.socs

@@ -22,30 +22,41 @@ config SOC_VIRT
 	help
 	  This enables support for QEMU Virt Machine.
 
-config SOC_KENDRYTE
-	bool "Kendryte K210 SoC"
+config SOC_CANAAN
+	bool "Canaan Kendryte K210 SoC"
 	depends on !MMU
 	select CLINT_TIMER if RISCV_M_MODE
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select SIFIVE_PLIC
+	select ARCH_HAS_RESET_CONTROLLER
+	select PINCTRL
 	help
-	  This enables support for Kendryte K210 SoC platform hardware.
+	  This enables support for Canaan Kendryte K210 SoC platform hardware.
 
-config SOC_KENDRYTE_K210_DTB
-	def_bool y
-	depends on SOC_KENDRYTE_K210_DTB_BUILTIN
+if SOC_CANAAN
 
-config SOC_KENDRYTE_K210_DTB_BUILTIN
-	bool "Builtin device tree for the Kendryte K210"
-	depends on SOC_KENDRYTE
+config SOC_CANAAN_K210_DTB_BUILTIN
+	bool "Builtin device tree for the Canaan Kendryte K210"
+	depends on SOC_CANAAN
 	default y
 	select OF
 	select BUILTIN_DTB
-	select SOC_KENDRYTE_K210_DTB
 	help
-	  Builds a device tree for the Kendryte K210 into the Linux image.
+	  Build a device tree for the Kendryte K210 into the Linux image.
 	  This option should be selected if no bootloader is being used.
 	  If unsure, say Y.
 
+config SOC_CANAAN_K210_DTB_SOURCE
+	string "Source file for the Canaan Kendryte K210 builtin DTB"
+	depends on SOC_CANAAN
+	depends on SOC_CANAAN_K210_DTB_BUILTIN
+	default "k210_generic"
+	help
+	  Base name (without suffix, relative to arch/riscv/boot/dts/canaan)
+	  for the DTS file that will be used to produce the DTB linked into the
+	  kernel.
+
+endif
+
 endmenu

arch/riscv/Makefile

@@ -12,6 +12,8 @@ OBJCOPYFLAGS    := -O binary
 LDFLAGS_vmlinux :=
 ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
 	LDFLAGS_vmlinux := --no-relax
+	KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
+	CC_FLAGS_FTRACE := -fpatchable-function-entry=8
 endif
 
 ifeq ($(CONFIG_64BIT)$(CONFIG_CMODEL_MEDLOW),yy)
@@ -65,6 +67,16 @@ KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax)
 # architectures.  It's faster to have GCC emit only aligned accesses.
 KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
 
+ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
+prepare: stack_protector_prepare
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += -mstack-protector-guard=tls		  \
+				-mstack-protector-guard-reg=tp		  \
+				-mstack-protector-guard-offset=$(shell	  \
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
+					include/generated/asm-offsets.h))
+endif
+
 # arch specific predefines for sparse
 CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
 
@@ -83,7 +95,7 @@ PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
 
-ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
+ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
 KBUILD_IMAGE := $(boot)/loader.bin
 else
 KBUILD_IMAGE := $(boot)/Image.gz

arch/riscv/boot/dts/Makefile

 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
-subdir-y += kendryte
+subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
 
 obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))

arch/riscv/boot/dts/canaan/Makefile

+# SPDX-License-Identifier: GPL-2.0
+ifneq ($(CONFIG_SOC_CANAAN_K210_DTB_SOURCE),"")
+dtb-y += $(strip $(shell echo $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))).dtb
+obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
+endif

arch/riscv/boot/dts/canaan/canaan_kd233.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kendryte KD233";
+	compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key0 {
+			label = "KEY0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(6, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(7, K210_PCF_SPI0_SCLK)>, /* wr */
+			 <K210_FPIOA(8, K210_PCF_GPIOHS21)>;  /* dc */
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(9, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(10, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(11, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(12, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(13, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(14, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(15, K210_PCF_DVP_PCLK)>,
+			 <K210_FPIOA(17, K210_PCF_DVP_HSYNC)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(20, K210_PCF_GPIOHS4)>, /* Rot. dip sw line 8 */
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>, /* Rot. dip sw line 4 */
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>, /* Rot. dip sw line 2 */
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>, /* Rot. dip sw line 1 */
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(26, K210_PCF_GPIOHS10)>;
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(29, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(30, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(31, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>; /* cs */
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(33, K210_PCF_I2S0_IN_D0)>,
+			 <K210_FPIOA(34, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(35, K210_PCF_I2S0_SCLK)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "ilitek,ili9341";
+		reg = <0>;
+		dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};

arch/riscv/boot/dts/canaan/k210.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <dt-bindings/clock/k210-clk.h>
+#include <dt-bindings/pinctrl/k210-fpioa.h>
+#include <dt-bindings/reset/k210-rst.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "canaan,kendryte-k210";
+
+	aliases {
+		serial0 = &uarths0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the privileged specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "canaan,k210", "riscv";
+			reg = <0>;
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,none";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "canaan,k210", "riscv";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,none";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		compatible = "canaan,k210-sram";
+		reg = <0x80000000 0x400000>,
+		      <0x80400000 0x200000>,
+		      <0x80600000 0x200000>;
+		reg-names = "sram0", "sram1", "aisram";
+		clocks = <&sysclk K210_CLK_SRAM0>,
+			 <&sysclk K210_CLK_SRAM1>,
+			 <&sysclk K210_CLK_AI>;
+		clock-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		rom0: nvmem@1000 {
+			reg = <0x1000 0x1000>;
+			read-only;
+		};
+
+		clint0: timer@2000000 {
+			compatible = "canaan,k210-clint", "sifive,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+					      &cpu1_intc 3 &cpu1_intc 7>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
+			reg = <0xC000000 0x4000000>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
+			riscv,ndev = <65>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "canaan,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysclk K210_CLK_CPU>;
+		};
+
+		gpio0: gpio-controller@38001000 {
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
+			reg = <0x38001000 0x1000>;
+			interrupt-controller;
+			interrupts = <34 35 36 37 38 39 40 41
+				      42 43 44 45 46 47 48 49
+				      50 51 52 53 54 55 56 57
+				      58 59 60 61 62 63 64 65>;
+			gpio-controller;
+			ngpios = <32>;
+		};
+
+		dmac0: dma-controller@50000000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x50000000 0x1000>;
+			interrupts = <27 28 29 30 31 32>;
+			#dma-cells = <1>;
+			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
+			clock-names = "core-clk", "cfgr-clk";
+			resets = <&sysrst K210_RST_DMA>;
+			dma-channels = <6>;
+			snps,dma-masters = <2>;
+			snps,priority = <0 1 2 3 4 5>;
+			snps,data-width = <5>;
+			snps,block-size = <0x200000 0x200000 0x200000
+					   0x200000 0x200000 0x200000>;
+			snps,axi-max-burst-len = <256>;
+		};
+
+		apb0: bus@50200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB0>;
+
+			gpio1: gpio@50200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x50200000 0x80>;
+				clocks = <&sysclk K210_CLK_APB0>,
+					 <&sysclk K210_CLK_GPIO>;
+				clock-names = "bus", "db";
+				resets = <&sysrst K210_RST_GPIO>;
+
+				gpio1_0: gpio-port@0 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "snps,dw-apb-gpio-port";
+					reg = <0>;
+					interrupt-controller;
+					interrupts = <23>;
+					gpio-controller;
+					ngpios = <8>;
+				};
+			};
+
+			uart1: serial@50210000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50210000 0x100>;
+				interrupts = <11>;
+				clocks = <&sysclk K210_CLK_UART1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART1>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			uart2: serial@50220000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50220000 0x100>;
+				interrupts = <12>;
+				clocks = <&sysclk K210_CLK_UART2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART2>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			uart3: serial@50230000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50230000 0x100>;
+				interrupts = <13>;
+				clocks = <&sysclk K210_CLK_UART3>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART3>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			spi2: spi@50240000 {
+				compatible = "canaan,k210-spi";
+				spi-slave;
+				reg = <0x50240000 0x100>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupts = <3>;
+				clocks = <&sysclk K210_CLK_SPI2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI2>;
+				spi-max-frequency = <25000000>;
+			};
+
+			i2s0: i2s@50250000 {
+				compatible = "snps,designware-i2s";
+				reg = <0x50250000 0x200>;
+				interrupts = <5>;
+				clocks = <&sysclk K210_CLK_I2S0>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S0>;
+			};
+
+			i2s1: i2s@50260000 {
+				compatible = "snps,designware-i2s";
+				reg = <0x50260000 0x200>;
+				interrupts = <6>;
+				clocks = <&sysclk K210_CLK_I2S1>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S1>;
+			};
+
+			i2s2: i2s@50270000 {
+				compatible = "snps,designware-i2s";
+				reg = <0x50270000 0x200>;
+				interrupts = <7>;
+				clocks = <&sysclk K210_CLK_I2S2>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S2>;
+			};
+
+			i2c0: i2c@50280000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x50280000 0x100>;
+				interrupts = <8>;
+				clocks = <&sysclk K210_CLK_I2C0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C0>;
+			};
+
+			i2c1: i2c@50290000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x50290000 0x100>;
+				interrupts = <9>;
+				clocks = <&sysclk K210_CLK_I2C1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C1>;
+			};
+
+			i2c2: i2c@502a0000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x502A0000 0x100>;
+				interrupts = <10>;
+				clocks = <&sysclk K210_CLK_I2C2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C2>;
+			};
+
+			fpioa: pinmux@502b0000 {
+				compatible = "canaan,k210-fpioa";
+				reg = <0x502B0000 0x100>;
+				clocks = <&sysclk K210_CLK_FPIOA>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_FPIOA>;
+				canaan,k210-sysctl-power = <&sysctl 108>;
+			};
+
+			timer0: timer@502d0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502D0000 0x100>;
+				interrupts = <14 15>;
+				clocks = <&sysclk K210_CLK_TIMER0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER0>;
+			};
+
+			timer1: timer@502e0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502E0000 0x100>;
+				interrupts = <16 17>;
+				clocks = <&sysclk K210_CLK_TIMER1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER1>;
+			};
+
+			timer2: timer@502f0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0000 0x100>;
+				interrupts = <18 19>;
+				clocks = <&sysclk K210_CLK_TIMER2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER2>;
+			};
+		};
+
+		apb1: bus@50400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB1>;
+
+			wdt0: watchdog@50400000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x50400000 0x100>;
+				interrupts = <21>;
+				clocks = <&sysclk K210_CLK_WDT0>,
+					 <&sysclk K210_CLK_APB1>;
+				clock-names = "tclk", "pclk";
+				resets = <&sysrst K210_RST_WDT0>;
+			};
+
+			wdt1: watchdog@50410000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x50410000 0x100>;
+				interrupts = <22>;
+				clocks = <&sysclk K210_CLK_WDT1>,
+					 <&sysclk K210_CLK_APB1>;
+				clock-names = "tclk", "pclk";
+				resets = <&sysrst K210_RST_WDT1>;
+			};
+
+			sysctl: syscon@50440000 {
+				compatible = "canaan,k210-sysctl",
+					     "syscon", "simple-mfd";
+				reg = <0x50440000 0x100>;
+				clocks = <&sysclk K210_CLK_APB1>;
+				clock-names = "pclk";
+
+				sysclk: clock-controller {
+					#clock-cells = <1>;
+					compatible = "canaan,k210-clk";
+					clocks = <&in0>;
+				};
+
+				sysrst: reset-controller {
+					compatible = "canaan,k210-rst";
+					#reset-cells = <1>;
+				};
+
+				reboot: syscon-reboot {
+					compatible = "syscon-reboot";
+					regmap = <&sysctl>;
+					offset = <48>;
+					mask = <1>;
+					value = <1>;
+				};
+			};
+		};
+
+		apb2: bus@52000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB2>;
+
+			spi0: spi@52000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "canaan,k210-spi";
+				reg = <0x52000000 0x100>;
+				interrupts = <1>;
+				clocks = <&sysclk K210_CLK_SPI0>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI0>;
+				reset-names = "spi";
+				spi-max-frequency = <25000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+
+			spi1: spi@53000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "canaan,k210-spi";
+				reg = <0x53000000 0x100>;
+				interrupts = <2>;
+				clocks = <&sysclk K210_CLK_SPI1>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI1>;
+				reset-names = "spi";
+				spi-max-frequency = <25000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+
+			spi3: spi@54000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwc-ssi-1.01a";
+				reg = <0x54000000 0x200>;
+				interrupts = <4>;
+				clocks = <&sysclk K210_CLK_SPI3>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI3>;
+				reset-names = "spi";
+				/* Could possibly go up to 200 MHz */
+				spi-max-frequency = <100000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+		};
+	};
+};

arch/riscv/boot/dts/canaan/k210_generic.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kendryte K210 generic";
+	compatible = "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pins: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pins: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX BiT";
+	compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
+		     "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-names = "default";
+	pinctrl-0 = <&jtag_pinctrl>;
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		spi-cs-high;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX Dock";
+	compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
+		     "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/*
+		 * Note: the board wiring drawing documents green on
+		 * gpio #4, red on gpio #5 and blue on gpio #6. However,
+		 * the board is actually wired differently as defined here.
+		 */
+		led0 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(9, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(10, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX GO";
+	compatible = "sipeed,maix-go", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		up {
+			label = "UP";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		press {
+			label = "PRESS";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "DOWN";
+			linux,code = <BTN_2>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SiPeed MAIXDUINO";
+	compatible = "sipeed,maixduino", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fpioa {
+	status = "okay";
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,  /* BOOT */
+			 <K210_FPIOA(21, K210_PCF_GPIOHS2)>,  /* Header "2" */
+			 <K210_FPIOA(22, K210_PCF_GPIOHS3)>,  /* Header "3" */
+			 <K210_FPIOA(23, K210_PCF_GPIOHS4)>,  /* Header "4" */
+			 <K210_FPIOA(24, K210_PCF_GPIOHS5)>,  /* Header "5" */
+			 <K210_FPIOA(32, K210_PCF_GPIOHS6)>,  /* Header "6" */
+			 <K210_FPIOA(15, K210_PCF_GPIOHS7)>,  /* Header "7" */
+			 <K210_FPIOA(14, K210_PCF_GPIOHS8)>,  /* Header "8" */
+			 <K210_FPIOA(13, K210_PCF_GPIOHS9)>,  /* Header "9" */
+			 <K210_FPIOA(12, K210_PCF_GPIOHS10)>, /* Header "10" */
+			 <K210_FPIOA(11, K210_PCF_GPIOHS11)>, /* Header "11" */
+			 <K210_FPIOA(10, K210_PCF_GPIOHS12)>, /* Header "12" */
+			 <K210_FPIOA(3,  K210_PCF_GPIOHS13)>; /* Header "13" */
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIO2)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>, /* Header "scl" */
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;  /* Header "sda" */
+	};
+
+	i2s1_pinctrl: i2s1-pinmux {
+		pinmux = <K210_FPIOA(33, K210_PCF_I2S1_WS)>,
+			 <K210_FPIOA(34, K210_PCF_I2S1_IN_D0)>,
+			 <K210_FPIOA(35, K210_PCF_I2S1_SCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		power-supply = <&vcc_3v3>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/kendryte/Makefile

-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_KENDRYTE_K210_DTB) += k210.dtb
-
-obj-$(CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))

arch/riscv/boot/dts/kendryte/k210.dts

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Western Digital Corporation or its affiliates.
- */
-
-/dts-v1/;
-
-#include "k210.dtsi"
-
-/ {
-	model = "Kendryte K210 generic";
-	compatible = "kendryte,k210";
-
-	chosen {
-		bootargs = "earlycon console=ttySIF0";
-		stdout-path = "serial0";
-	};
-};
-
-&uarths0 {
-	status = "okay";
-};
-

arch/riscv/boot/dts/kendryte/k210.dtsi

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
- * Copyright (C) 2020 Western Digital Corporation or its affiliates.
- */
-#include <dt-bindings/clock/k210-clk.h>
-
-/ {
-	/*
-	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
-	 * wide, and the upper half of all addresses is ignored.
-	 */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "kendryte,k210";
-
-	aliases {
-		serial0 = &uarths0;
-	};
-
-	/*
-	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
-	 * Since this is a non-ratified draft specification, the kernel does not
-	 * support it and the K210 support enabled only for the !MMU case.
-	 * Be consistent with this by setting the CPUs MMU type to "none".
-	 */
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <7800000>;
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
-			riscv,isa = "rv64imafdc";
-			mmu-type = "none";
-			i-cache-size = <0x8000>;
-			i-cache-block-size = <64>;
-			d-cache-size = <0x8000>;
-			d-cache-block-size = <64>;
-			clocks = <&sysctl K210_CLK_CPU>;
-			clock-frequency = <390000000>;
-			cpu0_intc: interrupt-controller {
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				compatible = "riscv,cpu-intc";
-			};
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			reg = <1>;
-			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
-			riscv,isa = "rv64imafdc";
-			mmu-type = "none";
-			i-cache-size = <0x8000>;
-			i-cache-block-size = <64>;
-			d-cache-size = <0x8000>;
-			d-cache-block-size = <64>;
-			clocks = <&sysctl K210_CLK_CPU>;
-			clock-frequency = <390000000>;
-			cpu1_intc: interrupt-controller {
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				compatible = "riscv,cpu-intc";
-			};
-		};
-	};
-
-	sram: memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x400000>,
-		      <0x80400000 0x200000>,
-		      <0x80600000 0x200000>;
-		reg-names = "sram0", "sram1", "aisram";
-	};
-
-	clocks {
-		in0: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "kendryte,k210-soc", "simple-bus";
-		ranges;
-		interrupt-parent = <&plic0>;
-
-		sysctl: sysctl@50440000 {
-			compatible = "kendryte,k210-sysctl", "simple-mfd";
-			reg = <0x50440000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		clint0: clint@2000000 {
-			#interrupt-cells = <1>;
-			compatible = "riscv,clint0";
-			reg = <0x2000000 0xC000>;
-			interrupts-extended =  <&cpu0_intc 3 &cpu0_intc 7
-						&cpu1_intc 3 &cpu1_intc 7>;
-			clocks = <&sysctl K210_CLK_ACLK>;
-		};
-
-		plic0: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "kendryte,k210-plic0", "riscv,plic0";
-			reg = <0xC000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
-					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
-			riscv,ndev = <65>;
-			riscv,max-priority = <7>;
-		};
-
-		uarths0: serial@38000000 {
-			compatible = "kendryte,k210-uarths", "sifive,uart0";
-			reg = <0x38000000 0x1000>;
-			interrupts = <33>;
-			clocks = <&sysctl K210_CLK_CPU>;
-		};
-	};
-};

arch/riscv/boot/dts/sifive/Makefile

 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \
+			    hifive-unmatched-a00.dtb

arch/riscv/boot/dts/sifive/fu740-c000.dtsi

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu740-c000", "sifive,fu740";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			compatible = "sifive,bullet0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			next-level-cache = <&ccache>;
+			reg = <0x0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu1: cpu@1 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu2: cpu@2 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu3: cpu@3 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu4: cpu@4 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			riscv,ndev = <69>;
+			interrupt-controller;
+			interrupts-extended = <
+				&cpu0_intc 0xffffffff
+				&cpu1_intc 0xffffffff &cpu1_intc 9
+				&cpu2_intc 0xffffffff &cpu2_intc 9
+				&cpu3_intc 0xffffffff &cpu3_intc 9
+				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+		};
+		prci: clock-controller@10000000 {
+			compatible = "sifive,fu740-c000-prci";
+			reg = <0x0 0x10000000 0x0 0x1000>;
+			clocks = <&hfclk>, <&rtcclk>;
+			#clock-cells = <1>;
+		};
+		uart0: serial@10010000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10010000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <39>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		uart1: serial@10011000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10011000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <40>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		i2c0: i2c@10030000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10030000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <52>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		i2c1: i2c@10031000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10031000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <53>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi0: spi@10040000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <41>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi1: spi@10041000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <42>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		spi0: spi@10050000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10050000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <43>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		eth0: ethernet@10090000 {
+			compatible = "sifive,fu540-c000-gem";
+			interrupt-parent = <&plic0>;
+			interrupts = <55>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
+			local-mac-address = [00 00 00 00 00 00];
+			clock-names = "pclk", "hclk";
+			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+				 <&prci PRCI_CLK_GEMGXLPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		pwm0: pwm@10020000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10020000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <44>, <45>, <46>, <47>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		pwm1: pwm@10021000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10021000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <48>, <49>, <50>, <51>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		ccache: cache-controller@2010000 {
+			compatible = "sifive,fu740-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic0>;
+			interrupts = <19 20 21 22>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+				     <37>, <38>;
+			reg = <0x0 0x10060000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+	};
+};

arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+#include "fu740-c000.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "SiFive HiFive Unmatched A00";
+	compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
+		     "sifive,fu740";
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	soc {
+	};
+
+	hfclk: hfclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-output-names = "hfclk";
+	};
+
+	rtcclk: rtcclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <RTCCLK_FREQ>;
+		clock-output-names = "rtcclk";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microamp = <5000000>;
+				regulator-max-microamp = <5000000>;
+				regulator-always-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microamp = <5000000>;
+				regulator-max-microamp = <5000000>;
+				regulator-always-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <2500000>;
+				regulator-max-microamp = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microamp = <1500000>;
+				regulator-max-microamp = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microamp = <3000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microamp = <3000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <100000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <100000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ld09: ldo9 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microamp = <300000>;
+				regulator-max-microamp = <300000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microamp = <300000>;
+				regulator-max-microamp = <300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "issi,is25wp256", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3300 3300>;
+		disable-wp;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};

arch/riscv/configs/nommu_k210_defconfig

 # CONFIG_CPU_ISOLATION is not set
-CONFIG_LOG_BUF_SHIFT=15
+CONFIG_LOG_BUF_SHIFT=13
 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_FORCE=y
+# CONFIG_RD_GZIP is not set
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+# CONFIG_RD_ZSTD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_FHANDLE is not set
 # CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
@@ -25,15 +27,17 @@ CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
-# CONFIG_SLAB_MERGE_DEFAULT is not set
 # CONFIG_MMU is not set
-CONFIG_SOC_KENDRYTE=y
+CONFIG_SOC_CANAAN=y
+CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_CMDLINE="earlycon console=ttySIF0"
 CONFIG_CMDLINE_FORCE=y
-CONFIG_JUMP_LABEL=y
+# CONFIG_SECCOMP is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_GCC_PLUGINS is not set
 # CONFIG_BLOCK is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
@@ -41,23 +45,47 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_ALLOW_DEV_COREDUMP is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_LDISC_AUTOLOAD is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_DEVMEM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+# CONFIG_SPI_MEM is not set
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+# CONFIG_GPIO_CDEV_V1 is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_SIFIVE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_USER=y
 # CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_SURFACE_PLATFORMS is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_LSM="[]"
 CONFIG_PRINTK_TIME=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+# CONFIG_FRAME_POINTER is not set
 # CONFIG_DEBUG_MISC is not set
 CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set

arch/riscv/configs/nommu_k210_sdcard_defconfig

+# CONFIG_CPU_ISOLATION is not set
+CONFIG_LOG_BUF_SHIFT=13
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_MMU is not set
+CONFIG_SOC_CANAAN=y
+CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
+CONFIG_MAXPHYSMEM_2GB=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_CMDLINE="earlycon console=ttySIF0 rootdelay=2 root=/dev/mmcblk0p1 ro"
+CONFIG_CMDLINE_FORCE=y
+# CONFIG_SECCOMP is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LDISC_AUTOLOAD is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+# CONFIG_SPI_MEM is not set
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+# CONFIG_GPIO_CDEV_V1 is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_SIFIVE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_PWRSEQ_EMMC is not set
+# CONFIG_PWRSEQ_SIMPLE is not set
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_USER=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_SURFACE_PLATFORMS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_LSM="[]"
+CONFIG_PRINTK_TIME=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_DEBUG_MISC is not set
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set

arch/riscv/include/asm/bug.h

@@ -85,6 +85,7 @@ do {								\
 struct pt_regs;
 struct task_struct;
 
+void __show_regs(struct pt_regs *regs);
 void die(struct pt_regs *regs, const char *str);
 void do_trap(struct pt_regs *regs, int signo, int code, unsigned long addr);
 

arch/riscv/include/asm/csr.h

@@ -41,10 +41,16 @@
 #define SATP_PPN	_AC(0x003FFFFF, UL)
 #define SATP_MODE_32	_AC(0x80000000, UL)
 #define SATP_MODE	SATP_MODE_32
+#define SATP_ASID_BITS	9
+#define SATP_ASID_SHIFT	22
+#define SATP_ASID_MASK	_AC(0x1FF, UL)
 #else
 #define SATP_PPN	_AC(0x00000FFFFFFFFFFF, UL)
 #define SATP_MODE_39	_AC(0x8000000000000000, UL)
 #define SATP_MODE	SATP_MODE_39
+#define SATP_ASID_BITS	16
+#define SATP_ASID_SHIFT	44
+#define SATP_ASID_MASK	_AC(0xFFFF, UL)
 #endif
 
 /* Exception cause high bit - is an interrupt if set */

arch/riscv/include/asm/kasan.h

@@ -8,12 +8,28 @@
 
 #ifdef CONFIG_KASAN
 
+/*
+ * The following comment was copied from arm64:
+ * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
+ * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses,
+ * where N = (1 << KASAN_SHADOW_SCALE_SHIFT).
+ *
+ * KASAN_SHADOW_OFFSET:
+ * This value is used to map an address to the corresponding shadow
+ * address by the following formula:
+ *     shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
+ *
+ * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range
+ * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual
+ * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation:
+ *      KASAN_SHADOW_OFFSET = KASAN_SHADOW_END -
+ *                              (1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT))
+ */
 #define KASAN_SHADOW_SCALE_SHIFT	3
 
-#define KASAN_SHADOW_SIZE	(UL(1) << (38 - KASAN_SHADOW_SCALE_SHIFT))
-#define KASAN_SHADOW_START	KERN_VIRT_START /* 2^64 - 2^38 */
+#define KASAN_SHADOW_SIZE	(UL(1) << ((CONFIG_VA_BITS - 1) - KASAN_SHADOW_SCALE_SHIFT))
+#define KASAN_SHADOW_START	KERN_VIRT_START
 #define KASAN_SHADOW_END	(KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
-
 #define KASAN_SHADOW_OFFSET	(KASAN_SHADOW_END - (1ULL << \
 					(64 - KASAN_SHADOW_SCALE_SHIFT)))
 

arch/riscv/include/asm/kprobes.h

@@ -11,4 +11,44 @@
 
 #include <asm-generic/kprobes.h>
 
+#ifdef CONFIG_KPROBES
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+#include <asm/probes.h>
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* Single step context for kprobe */
+struct kprobe_step_ctx {
+	unsigned long ss_pending;
+	unsigned long match_addr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	unsigned long saved_status;
+	struct prev_kprobe prev_kprobe;
+	struct kprobe_step_ctx ss_ctx;
+};
+
+void arch_remove_kprobe(struct kprobe *p);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr);
+bool kprobe_breakpoint_handler(struct pt_regs *regs);
+bool kprobe_single_step_handler(struct pt_regs *regs);
+void kretprobe_trampoline(void);
+void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
+
+#endif /* CONFIG_KPROBES */
 #endif /* _ASM_RISCV_KPROBES_H */

arch/riscv/include/asm/mmu.h

@@ -12,6 +12,8 @@
 typedef struct {
 #ifndef CONFIG_MMU
 	unsigned long	end_brk;
+#else
+	atomic_long_t id;
 #endif
 	void *vdso;
 #ifdef CONFIG_SMP

arch/riscv/include/asm/mmu_context.h

@@ -23,6 +23,16 @@ static inline void activate_mm(struct mm_struct *prev,
 	switch_mm(prev, next, NULL);
 }
 
+#define init_new_context init_new_context
+static inline int init_new_context(struct task_struct *tsk,
+			struct mm_struct *mm)
+{
+#ifdef CONFIG_MMU
+	atomic_long_set(&mm->context.id, 0);
+#endif
+	return 0;
+}
+
 #include <asm-generic/mmu_context.h>
 
 #endif /* _ASM_RISCV_MMU_CONTEXT_H */

arch/riscv/include/asm/mmzone.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/numa.h>
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[(nid)])
+
+#endif /* CONFIG_NUMA */
+#endif /* __ASM_MMZONE_H */

arch/riscv/include/asm/numa.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_NUMA_H
+#define __ASM_NUMA_H
+
+#include <asm/topology.h>
+#include <asm-generic/numa.h>
+
+#endif	/* __ASM_NUMA_H */

arch/riscv/include/asm/page.h

@@ -97,9 +97,6 @@ extern unsigned long pfn_base;
 #define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
 #endif /* CONFIG_MMU */
 
-extern unsigned long max_low_pfn;
-extern unsigned long min_low_pfn;
-
 #define __pa_to_va_nodebug(x)	((void *)((unsigned long) (x) + va_pa_offset))
 #define __va_to_pa_nodebug(x)	((unsigned long)(x) - va_pa_offset)
 

arch/riscv/include/asm/pci.h

@@ -32,6 +32,20 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 	/* always show the domain in /proc */
 	return 1;
 }
+
+#ifdef	CONFIG_NUMA
+
+static inline int pcibus_to_node(struct pci_bus *bus)
+{
+	return dev_to_node(&bus->dev);
+}
+#ifndef cpumask_of_pcibus
+#define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ?		\
+				 cpu_all_mask :				\
+				 cpumask_of_node(pcibus_to_node(bus)))
+#endif
+#endif	/* CONFIG_NUMA */
+
 #endif  /* CONFIG_PCI */
 
 #endif  /* _ASM_RISCV_PCI_H */

arch/riscv/include/asm/pgtable.h

@@ -186,6 +186,11 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return (unsigned long)pfn_to_virt(pmd_val(pmd) >> _PAGE_PFN_SHIFT);
 }
 
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
 /* Yields the page frame number (PFN) of a page table entry */
 static inline unsigned long pte_pfn(pte_t pte)
 {
@@ -289,6 +294,21 @@ static inline pte_t pte_mkhuge(pte_t pte)
 	return pte;
 }
 
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * See the comment in include/asm-generic/pgtable.h
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROT_NONE)) == _PAGE_PROT_NONE;
+}
+
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif
+
 /* Modify page protection bits */
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
@@ -468,6 +488,7 @@ extern void *dtb_early_va;
 extern uintptr_t dtb_early_pa;
 void setup_bootmem(void);
 void paging_init(void);
+void misc_mem_init(void);
 
 #define FIRST_USER_ADDRESS  0
 

arch/riscv/include/asm/probes.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_RISCV_PROBES_H
+#define _ASM_RISCV_PROBES_H
+
+typedef u32 probe_opcode_t;
+typedef bool (probes_handler_t) (u32 opcode, unsigned long addr, struct pt_regs *);
+
+/* architecture specific copy of original instruction */
+struct arch_probe_insn {
+	probe_opcode_t *insn;
+	probes_handler_t *handler;
+	/* restore address after simulation */
+	unsigned long restore;
+};
+
+#ifdef CONFIG_KPROBES
+typedef u32 kprobe_opcode_t;
+struct arch_specific_insn {
+	struct arch_probe_insn api;
+};
+#endif
+
+#endif /* _ASM_RISCV_PROBES_H */

arch/riscv/include/asm/processor.h

@@ -34,6 +34,7 @@ struct thread_struct {
 	unsigned long sp;	/* Kernel mode stack */
 	unsigned long s[12];	/* s[0]: frame pointer */
 	struct __riscv_d_ext_state fstate;
+	unsigned long bad_cause;
 };
 
 #define INIT_THREAD {					\

arch/riscv/include/asm/ptrace.h

@@ -8,6 +8,7 @@
 
 #include <uapi/asm/ptrace.h>
 #include <asm/csr.h>
+#include <linux/compiler.h>
 
 #ifndef __ASSEMBLY__
 
@@ -60,6 +61,7 @@ struct pt_regs {
 
 #define user_mode(regs) (((regs)->status & SR_PP) == 0)
 
+#define MAX_REG_OFFSET offsetof(struct pt_regs, orig_a0)
 
 /* Helpers for working with the instruction pointer */
 static inline unsigned long instruction_pointer(struct pt_regs *regs)
@@ -85,6 +87,12 @@ static inline void user_stack_pointer_set(struct pt_regs *regs,
 	regs->sp =  val;
 }
 
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
 /* Helpers for working with the frame pointer */
 static inline unsigned long frame_pointer(struct pt_regs *regs)
 {
@@ -101,6 +109,33 @@ static inline unsigned long regs_return_value(struct pt_regs *regs)
 	return regs->a0;
 }
 
+static inline void regs_set_return_value(struct pt_regs *regs,
+					 unsigned long val)
+{
+	regs->a0 = val;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten
+ * @offset:	offset of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_RISCV_PTRACE_H */

arch/riscv/include/asm/sbi.h

@@ -89,7 +89,7 @@ struct sbiret {
 	long value;
 };
 
-int sbi_init(void);
+void sbi_init(void);
 struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg1, unsigned long arg2,
 			unsigned long arg3, unsigned long arg4,
@@ -100,13 +100,13 @@ int sbi_console_getchar(void);
 void sbi_set_timer(uint64_t stime_value);
 void sbi_shutdown(void);
 void sbi_clear_ipi(void);
-void sbi_send_ipi(const unsigned long *hart_mask);
-void sbi_remote_fence_i(const unsigned long *hart_mask);
-void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+int sbi_send_ipi(const unsigned long *hart_mask);
+int sbi_remote_fence_i(const unsigned long *hart_mask);
+int sbi_remote_sfence_vma(const unsigned long *hart_mask,
 			   unsigned long start,
 			   unsigned long size);
 
-void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+int sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
 				unsigned long start,
 				unsigned long size,
 				unsigned long asid);
@@ -147,11 +147,7 @@ static inline unsigned long sbi_minor_version(void)
 
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
-/* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
-void sbi_set_timer(uint64_t stime_value);
-void sbi_clear_ipi(void);
-void sbi_send_ipi(const unsigned long *hart_mask);
-void sbi_remote_fence_i(const unsigned long *hart_mask);
-void sbi_init(void);
+static inline int sbi_remote_fence_i(const unsigned long *hart_mask) { return -1; }
+static inline void sbi_init(void) {}
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */

arch/riscv/include/asm/set_memory.h

@@ -22,7 +22,7 @@ static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
-static inline void protect_kernel_text_data(void) {};
+static inline void protect_kernel_text_data(void) {}
 static inline int set_memory_rw_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 

arch/riscv/include/asm/soc.h

@@ -21,42 +21,4 @@ void soc_early_init(void);
 extern unsigned long __soc_early_init_table_start;
 extern unsigned long __soc_early_init_table_end;
 
-/*
- * Allows Linux to provide a device tree, which is necessary for SOCs that
- * don't provide a useful one on their own.
- */
-struct soc_builtin_dtb {
-	unsigned long vendor_id;
-	unsigned long arch_id;
-	unsigned long imp_id;
-	void *(*dtb_func)(void);
-};
-
-/*
- * The argument name must specify a valid DTS file name without the dts
- * extension.
- */
-#define SOC_BUILTIN_DTB_DECLARE(name, vendor, arch, impl)		\
-	extern void *__dtb_##name##_begin;				\
-									\
-	static __init __used						\
-	void *__soc_builtin_dtb_f__##name(void)				\
-	{								\
-		return (void *)&__dtb_##name##_begin;			\
-	}								\
-									\
-	static const struct soc_builtin_dtb __soc_builtin_dtb__##name	\
-		__used __section("__soc_builtin_dtb_table") =		\
-	{								\
-		.vendor_id = vendor,					\
-		.arch_id   = arch,					\
-		.imp_id    = impl,					\
-		.dtb_func  = __soc_builtin_dtb_f__##name,		\
-	}
-
-extern unsigned long __soc_builtin_dtb_table_start;
-extern unsigned long __soc_builtin_dtb_table_end;
-
-void *soc_lookup_builtin_dtb(void);
-
 #endif

arch/riscv/include/asm/stackprotector.h

@@ -24,6 +24,7 @@ static __always_inline void boot_init_stack_canary(void)
 	canary &= CANARY_MASK;
 
 	current->stack_canary = canary;
-	__stack_chk_guard = current->stack_canary;
+	if (!IS_ENABLED(CONFIG_STACKPROTECTOR_PER_TASK))
+		__stack_chk_guard = current->stack_canary;
 }
 #endif /* _ASM_RISCV_STACKPROTECTOR_H */

arch/riscv/include/asm/stacktrace.h

@@ -13,5 +13,7 @@ struct stackframe {
 
 extern void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 				    bool (*fn)(void *, unsigned long), void *arg);
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *task,
+			   const char *loglvl);
 
 #endif /* _ASM_RISCV_STACKTRACE_H */

arch/riscv/include/asm/thread_info.h

@@ -75,6 +75,7 @@ struct thread_info {
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing */
 #define TIF_SECCOMP		8	/* syscall secure computing */
 #define TIF_NOTIFY_SIGNAL	9	/* signal notifications exist */
+#define TIF_UPROBE		10	/* uprobe breakpoint or singlestep */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
@@ -84,10 +85,11 @@ struct thread_info {
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
 
 #define _TIF_WORK_MASK \
 	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-	 _TIF_NOTIFY_SIGNAL)
+	 _TIF_NOTIFY_SIGNAL | _TIF_UPROBE)
 
 #define _TIF_SYSCALL_WORK \
 	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT | \

arch/riscv/include/asm/uprobes.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_RISCV_UPROBES_H
+#define _ASM_RISCV_UPROBES_H
+
+#include <asm/probes.h>
+#include <asm/patch.h>
+#include <asm/bug.h>
+
+#define MAX_UINSN_BYTES		8
+
+#ifdef CONFIG_RISCV_ISA_C
+#define UPROBE_SWBP_INSN	__BUG_INSN_16
+#define UPROBE_SWBP_INSN_SIZE	2
+#else
+#define UPROBE_SWBP_INSN	__BUG_INSN_32
+#define UPROBE_SWBP_INSN_SIZE	4
+#endif
+#define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
+
+typedef u32 uprobe_opcode_t;
+
+struct arch_uprobe_task {
+	unsigned long   saved_cause;
+};
+
+struct arch_uprobe {
+	union {
+		u8 insn[MAX_UINSN_BYTES];
+		u8 ixol[MAX_UINSN_BYTES];
+	};
+	struct arch_probe_insn api;
+	unsigned long insn_size;
+	bool simulate;
+};
+
+bool uprobe_breakpoint_handler(struct pt_regs *regs);
+bool uprobe_single_step_handler(struct pt_regs *regs);
+
+#endif /* _ASM_RISCV_UPROBES_H */

arch/riscv/kernel/Makefile

@@ -4,8 +4,9 @@
 #
 
 ifdef CONFIG_FTRACE
-CFLAGS_REMOVE_ftrace.o	= -pg
-CFLAGS_REMOVE_patch.o	= -pg
+CFLAGS_REMOVE_ftrace.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_patch.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_sbi.o	= $(CC_FLAGS_FTRACE)
 endif
 
 extra-y += head.o
@@ -29,6 +30,7 @@ obj-y	+= riscv_ksyms.o
 obj-y	+= stacktrace.o
 obj-y	+= cacheinfo.o
 obj-y	+= patch.o
+obj-y	+= probes/
 obj-$(CONFIG_MMU) += vdso.o vdso/
 
 obj-$(CONFIG_RISCV_M_MODE)	+= traps_misaligned.o

arch/riscv/kernel/asm-offsets.c

@@ -68,6 +68,9 @@ void asm_offsets(void)
 	OFFSET(TASK_THREAD_F30, task_struct, thread.fstate.f[30]);
 	OFFSET(TASK_THREAD_F31, task_struct, thread.fstate.f[31]);
 	OFFSET(TASK_THREAD_FCSR, task_struct, thread.fstate.fcsr);
+#ifdef CONFIG_STACKPROTECTOR
+	OFFSET(TSK_STACK_CANARY, task_struct, stack_canary);
+#endif
 
 	DEFINE(PT_SIZE, sizeof(struct pt_regs));
 	OFFSET(PT_EPC, pt_regs, epc);

arch/riscv/kernel/ftrace.c

@@ -72,29 +72,56 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
 	return 0;
 }
 
+/*
+ * Put 5 instructions with 16 bytes at the front of function within
+ * patchable function entry nops' area.
+ *
+ * 0: REG_S  ra, -SZREG(sp)
+ * 1: auipc  ra, 0x?
+ * 2: jalr   -?(ra)
+ * 3: REG_L  ra, -SZREG(sp)
+ *
+ * So the opcodes is:
+ * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
+ * 1: 0x???????? -> auipc
+ * 2: 0x???????? -> jalr
+ * 3: 0xff813083 (ld)/0xffc12083 (lw)
+ */
+#if __riscv_xlen == 64
+#define INSN0	0xfe113c23
+#define INSN3	0xff813083
+#elif __riscv_xlen == 32
+#define INSN0	0xfe112e23
+#define INSN3	0xffc12083
+#endif
+
+#define FUNC_ENTRY_SIZE	16
+#define FUNC_ENTRY_JMP	4
+
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
-	int ret = ftrace_check_current_call(rec->ip, NULL);
+	unsigned int call[4] = {INSN0, 0, 0, INSN3};
+	unsigned long target = addr;
+	unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
 
-	if (ret)
-		return ret;
+	call[1] = to_auipc_insn((unsigned int)(target - caller));
+	call[2] = to_jalr_insn((unsigned int)(target - caller));
 
-	return __ftrace_modify_call(rec->ip, addr, true);
+	if (patch_text_nosync((void *)rec->ip, call, FUNC_ENTRY_SIZE))
+		return -EPERM;
+
+	return 0;
 }
 
 int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 		    unsigned long addr)
 {
-	unsigned int call[2];
-	int ret;
+	unsigned int nops[4] = {NOP4, NOP4, NOP4, NOP4};
 
-	make_call(rec->ip, addr, call);
-	ret = ftrace_check_current_call(rec->ip, call);
-
-	if (ret)
-		return ret;
+	if (patch_text_nosync((void *)rec->ip, nops, FUNC_ENTRY_SIZE))
+		return -EPERM;
 
-	return __ftrace_modify_call(rec->ip, addr, false);
+	return 0;
 }
 
 
@@ -139,15 +166,16 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 		       unsigned long addr)
 {
 	unsigned int call[2];
+	unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
 	int ret;
 
-	make_call(rec->ip, old_addr, call);
-	ret = ftrace_check_current_call(rec->ip, call);
+	make_call(caller, old_addr, call);
+	ret = ftrace_check_current_call(caller, call);
 
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call(rec->ip, addr, true);
+	return __ftrace_modify_call(caller, addr, true);
 }
 #endif
 
@@ -176,53 +204,30 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 extern void ftrace_graph_call(void);
+extern void ftrace_graph_regs_call(void);
 int ftrace_enable_ftrace_graph_caller(void)
 {
-	unsigned int call[2];
-	static int init_graph = 1;
 	int ret;
 
-	make_call(&ftrace_graph_call, &ftrace_stub, call);
-
-	/*
-	 * When enabling graph tracer for the first time, ftrace_graph_call
-	 * should contains a call to ftrace_stub.  Once it has been disabled,
-	 * the 8-bytes at the position becomes NOPs.
-	 */
-	if (init_graph) {
-		ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
-						call);
-		init_graph = 0;
-	} else {
-		ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
-						NULL);
-	}
-
+	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+				    (unsigned long)&prepare_ftrace_return, true);
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
 				    (unsigned long)&prepare_ftrace_return, true);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	unsigned int call[2];
 	int ret;
 
-	make_call(&ftrace_graph_call, &prepare_ftrace_return, call);
-
-	/*
-	 * This is to make sure that ftrace_enable_ftrace_graph_caller
-	 * did the right thing.
-	 */
-	ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
-					call);
-
+	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+				    (unsigned long)&prepare_ftrace_return, false);
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
 				    (unsigned long)&prepare_ftrace_return, false);
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/riscv/kernel/head.S

@@ -260,7 +260,11 @@ clear_bss_done:
 
 	/* Initialize page tables and relocate to virtual addresses */
 	la sp, init_thread_union + THREAD_SIZE
+#ifdef CONFIG_BUILTIN_DTB
+	la a0, __dtb_start
+#else
 	mv a0, s1
+#endif /* CONFIG_BUILTIN_DTB */
 	call setup_vm
 #ifdef CONFIG_MMU
 	la a0, early_pg_dir

arch/riscv/kernel/image-vars.h

@@ -3,7 +3,7 @@
  * Copyright (C) 2020 Western Digital Corporation or its affiliates.
  * Linker script variables to be set after section resolution, as
  * ld.lld does not like variables assigned before SECTIONS is processed.
- * Based on arch/arm64/kerne/image-vars.h
+ * Based on arch/arm64/kernel/image-vars.h
  */
 #ifndef __RISCV_KERNEL_IMAGE_VARS_H
 #define __RISCV_KERNEL_IMAGE_VARS_H

arch/riscv/kernel/mcount-dyn.S

@@ -13,224 +13,186 @@
 
 	.text
 
-	.macro SAVE_ABI_STATE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi    sp, sp, -48
-	sd      s0, 32(sp)
-	sd      ra, 40(sp)
-	addi    s0, sp, 48
-	sd      t0, 24(sp)
-	sd      t1, 16(sp)
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	sd      t2, 8(sp)
-#endif
-#else
-	addi	sp, sp, -16
-	sd	s0, 0(sp)
-	sd	ra, 8(sp)
-	addi	s0, sp, 16
-#endif
+#define FENTRY_RA_OFFSET	12
+#define ABI_SIZE_ON_STACK	72
+#define ABI_A0			0
+#define ABI_A1			8
+#define ABI_A2			16
+#define ABI_A3			24
+#define ABI_A4			32
+#define ABI_A5			40
+#define ABI_A6			48
+#define ABI_A7			56
+#define ABI_RA			64
+
+	.macro SAVE_ABI
+	addi	sp, sp, -SZREG
+	addi	sp, sp, -ABI_SIZE_ON_STACK
+
+	REG_S	a0, ABI_A0(sp)
+	REG_S	a1, ABI_A1(sp)
+	REG_S	a2, ABI_A2(sp)
+	REG_S	a3, ABI_A3(sp)
+	REG_S	a4, ABI_A4(sp)
+	REG_S	a5, ABI_A5(sp)
+	REG_S	a6, ABI_A6(sp)
+	REG_S	a7, ABI_A7(sp)
+	REG_S	ra, ABI_RA(sp)
 	.endm
 
-	.macro RESTORE_ABI_STATE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ld	s0, 32(sp)
-	ld	ra, 40(sp)
-	addi	sp, sp, 48
-#else
-	ld	ra, 8(sp)
-	ld	s0, 0(sp)
-	addi	sp, sp, 16
-#endif
+	.macro RESTORE_ABI
+	REG_L	a0, ABI_A0(sp)
+	REG_L	a1, ABI_A1(sp)
+	REG_L	a2, ABI_A2(sp)
+	REG_L	a3, ABI_A3(sp)
+	REG_L	a4, ABI_A4(sp)
+	REG_L	a5, ABI_A5(sp)
+	REG_L	a6, ABI_A6(sp)
+	REG_L	a7, ABI_A7(sp)
+	REG_L	ra, ABI_RA(sp)
+
+	addi	sp, sp, ABI_SIZE_ON_STACK
+	addi	sp, sp, SZREG
 	.endm
 
-	.macro RESTORE_GRAPH_ARGS
-	ld	a0, 24(sp)
-	ld	a1, 16(sp)
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	a2, 8(sp)
-#endif
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+	.macro SAVE_ALL
+	addi	sp, sp, -SZREG
+	addi	sp, sp, -PT_SIZE_ON_STACK
+
+	REG_S x1,  PT_EPC(sp)
+	addi	sp, sp, PT_SIZE_ON_STACK
+	REG_L x1,  (sp)
+	addi	sp, sp, -PT_SIZE_ON_STACK
+	REG_S x1,  PT_RA(sp)
+	REG_L x1,  PT_EPC(sp)
+
+	REG_S x2,  PT_SP(sp)
+	REG_S x3,  PT_GP(sp)
+	REG_S x4,  PT_TP(sp)
+	REG_S x5,  PT_T0(sp)
+	REG_S x6,  PT_T1(sp)
+	REG_S x7,  PT_T2(sp)
+	REG_S x8,  PT_S0(sp)
+	REG_S x9,  PT_S1(sp)
+	REG_S x10, PT_A0(sp)
+	REG_S x11, PT_A1(sp)
+	REG_S x12, PT_A2(sp)
+	REG_S x13, PT_A3(sp)
+	REG_S x14, PT_A4(sp)
+	REG_S x15, PT_A5(sp)
+	REG_S x16, PT_A6(sp)
+	REG_S x17, PT_A7(sp)
+	REG_S x18, PT_S2(sp)
+	REG_S x19, PT_S3(sp)
+	REG_S x20, PT_S4(sp)
+	REG_S x21, PT_S5(sp)
+	REG_S x22, PT_S6(sp)
+	REG_S x23, PT_S7(sp)
+	REG_S x24, PT_S8(sp)
+	REG_S x25, PT_S9(sp)
+	REG_S x26, PT_S10(sp)
+	REG_S x27, PT_S11(sp)
+	REG_S x28, PT_T3(sp)
+	REG_S x29, PT_T4(sp)
+	REG_S x30, PT_T5(sp)
+	REG_S x31, PT_T6(sp)
 	.endm
 
-ENTRY(ftrace_graph_caller)
-	addi	sp, sp, -16
-	sd	s0, 0(sp)
-	sd	ra, 8(sp)
-	addi	s0, sp, 16
-ftrace_graph_call:
-	.global ftrace_graph_call
-	/*
-	 * Calling ftrace_enable/disable_ftrace_graph_caller would overwrite the
-	 * call below.  Check ftrace_modify_all_code for details.
-	 */
-	call	ftrace_stub
-	ld	ra, 8(sp)
-	ld	s0, 0(sp)
-	addi	sp, sp, 16
-	ret
-ENDPROC(ftrace_graph_caller)
+	.macro RESTORE_ALL
+	REG_L x1,  PT_RA(sp)
+	addi	sp, sp, PT_SIZE_ON_STACK
+	REG_S x1,  (sp)
+	addi	sp, sp, -PT_SIZE_ON_STACK
+	REG_L x1,  PT_EPC(sp)
+	REG_L x2,  PT_SP(sp)
+	REG_L x3,  PT_GP(sp)
+	REG_L x4,  PT_TP(sp)
+	REG_L x5,  PT_T0(sp)
+	REG_L x6,  PT_T1(sp)
+	REG_L x7,  PT_T2(sp)
+	REG_L x8,  PT_S0(sp)
+	REG_L x9,  PT_S1(sp)
+	REG_L x10, PT_A0(sp)
+	REG_L x11, PT_A1(sp)
+	REG_L x12, PT_A2(sp)
+	REG_L x13, PT_A3(sp)
+	REG_L x14, PT_A4(sp)
+	REG_L x15, PT_A5(sp)
+	REG_L x16, PT_A6(sp)
+	REG_L x17, PT_A7(sp)
+	REG_L x18, PT_S2(sp)
+	REG_L x19, PT_S3(sp)
+	REG_L x20, PT_S4(sp)
+	REG_L x21, PT_S5(sp)
+	REG_L x22, PT_S6(sp)
+	REG_L x23, PT_S7(sp)
+	REG_L x24, PT_S8(sp)
+	REG_L x25, PT_S9(sp)
+	REG_L x26, PT_S10(sp)
+	REG_L x27, PT_S11(sp)
+	REG_L x28, PT_T3(sp)
+	REG_L x29, PT_T4(sp)
+	REG_L x30, PT_T5(sp)
+	REG_L x31, PT_T6(sp)
+
+	addi	sp, sp, PT_SIZE_ON_STACK
+	addi	sp, sp, SZREG
+	.endm
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 
 ENTRY(ftrace_caller)
-	/*
-	 * a0: the address in the caller when calling ftrace_caller
-	 * a1: the caller's return address
-	 * a2: the address of global variable function_trace_op
-	 */
-	ld	a1, -8(s0)
-	addi	a0, ra, -MCOUNT_INSN_SIZE
-	la	t5, function_trace_op
-	ld	a2, 0(t5)
+	SAVE_ABI
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/*
-	 * the graph tracer (specifically, prepare_ftrace_return) needs these
-	 * arguments but for now the function tracer occupies the regs, so we
-	 * save them in temporary regs to recover later.
-	 */
-	addi	t0, s0, -8
-	mv	t1, a0
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	t2, -16(s0)
-#endif
-#endif
+	addi	a0, ra, -FENTRY_RA_OFFSET
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)
+	REG_L	a1, ABI_SIZE_ON_STACK(sp)
+	mv	a3, sp
 
-	SAVE_ABI_STATE
 ftrace_call:
 	.global ftrace_call
-	/*
-	 * For the dynamic ftrace to work, here we should reserve at least
-	 * 8 bytes for a functional auipc-jalr pair.  The following call
-	 * serves this purpose.
-	 *
-	 * Calling ftrace_update_ftrace_func would overwrite the nops below.
-	 * Check ftrace_modify_all_code for details.
-	 */
 	call	ftrace_stub
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	RESTORE_GRAPH_ARGS
-	call	ftrace_graph_caller
+	addi	a0, sp, ABI_SIZE_ON_STACK
+	REG_L	a1, ABI_RA(sp)
+	addi	a1, a1, -FENTRY_RA_OFFSET
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	mv	a2, s0
 #endif
-
-	RESTORE_ABI_STATE
+ftrace_graph_call:
+	.global ftrace_graph_call
+	call	ftrace_stub
+#endif
+	RESTORE_ABI
 	ret
 ENDPROC(ftrace_caller)
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	.macro SAVE_ALL
-	addi	sp, sp, -(PT_SIZE_ON_STACK+16)
-	sd	s0, (PT_SIZE_ON_STACK)(sp)
-	sd	ra, (PT_SIZE_ON_STACK+8)(sp)
-	addi	s0, sp, (PT_SIZE_ON_STACK+16)
-
-	sd x1,  PT_RA(sp)
-	sd x2,  PT_SP(sp)
-	sd x3,  PT_GP(sp)
-	sd x4,  PT_TP(sp)
-	sd x5,  PT_T0(sp)
-	sd x6,  PT_T1(sp)
-	sd x7,  PT_T2(sp)
-	sd x8,  PT_S0(sp)
-	sd x9,  PT_S1(sp)
-	sd x10, PT_A0(sp)
-	sd x11, PT_A1(sp)
-	sd x12, PT_A2(sp)
-	sd x13, PT_A3(sp)
-	sd x14, PT_A4(sp)
-	sd x15, PT_A5(sp)
-	sd x16, PT_A6(sp)
-	sd x17, PT_A7(sp)
-	sd x18, PT_S2(sp)
-	sd x19, PT_S3(sp)
-	sd x20, PT_S4(sp)
-	sd x21, PT_S5(sp)
-	sd x22, PT_S6(sp)
-	sd x23, PT_S7(sp)
-	sd x24, PT_S8(sp)
-	sd x25, PT_S9(sp)
-	sd x26, PT_S10(sp)
-	sd x27, PT_S11(sp)
-	sd x28, PT_T3(sp)
-	sd x29, PT_T4(sp)
-	sd x30, PT_T5(sp)
-	sd x31, PT_T6(sp)
-	.endm
-
-	.macro RESTORE_ALL
-	ld x1,  PT_RA(sp)
-	ld x2,  PT_SP(sp)
-	ld x3,  PT_GP(sp)
-	ld x4,  PT_TP(sp)
-	ld x5,  PT_T0(sp)
-	ld x6,  PT_T1(sp)
-	ld x7,  PT_T2(sp)
-	ld x8,  PT_S0(sp)
-	ld x9,  PT_S1(sp)
-	ld x10, PT_A0(sp)
-	ld x11, PT_A1(sp)
-	ld x12, PT_A2(sp)
-	ld x13, PT_A3(sp)
-	ld x14, PT_A4(sp)
-	ld x15, PT_A5(sp)
-	ld x16, PT_A6(sp)
-	ld x17, PT_A7(sp)
-	ld x18, PT_S2(sp)
-	ld x19, PT_S3(sp)
-	ld x20, PT_S4(sp)
-	ld x21, PT_S5(sp)
-	ld x22, PT_S6(sp)
-	ld x23, PT_S7(sp)
-	ld x24, PT_S8(sp)
-	ld x25, PT_S9(sp)
-	ld x26, PT_S10(sp)
-	ld x27, PT_S11(sp)
-	ld x28, PT_T3(sp)
-	ld x29, PT_T4(sp)
-	ld x30, PT_T5(sp)
-	ld x31, PT_T6(sp)
-
-	ld	s0, (PT_SIZE_ON_STACK)(sp)
-	ld	ra, (PT_SIZE_ON_STACK+8)(sp)
-	addi	sp, sp, (PT_SIZE_ON_STACK+16)
-	.endm
-
-	.macro RESTORE_GRAPH_REG_ARGS
-	ld	a0, PT_T0(sp)
-	ld	a1, PT_T1(sp)
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	a2, PT_T2(sp)
-#endif
-	.endm
-
-/*
- * Most of the contents are the same as ftrace_caller.
- */
 ENTRY(ftrace_regs_caller)
-	/*
-	 * a3: the address of all registers in the stack
-	 */
-	ld	a1, -8(s0)
-	addi	a0, ra, -MCOUNT_INSN_SIZE
-	la	t5, function_trace_op
-	ld	a2, 0(t5)
-	addi	a3, sp, -(PT_SIZE_ON_STACK+16)
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi	t0, s0, -8
-	mv	t1, a0
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	t2, -16(s0)
-#endif
-#endif
 	SAVE_ALL
 
+	addi	a0, ra, -FENTRY_RA_OFFSET
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)
+	REG_L	a1, PT_SIZE_ON_STACK(sp)
+	mv	a3, sp
+
 ftrace_regs_call:
 	.global ftrace_regs_call
 	call	ftrace_stub
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	RESTORE_GRAPH_REG_ARGS
-	call	ftrace_graph_caller
+	addi	a0, sp, PT_RA
+	REG_L	a1, PT_EPC(sp)
+	addi	a1, a1, -FENTRY_RA_OFFSET
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	mv	a2, s0
+#endif
+ftrace_graph_regs_call:
+	.global ftrace_graph_regs_call
+	call	ftrace_stub
 #endif
 
 	RESTORE_ALL

arch/riscv/kernel/patch.c

@@ -20,7 +20,12 @@ struct patch_insn {
 };
 
 #ifdef CONFIG_MMU
-static void *patch_map(void *addr, int fixmap)
+/*
+ * The fix_to_virt(, idx) needs a const value (not a dynamic variable of
+ * reg-a0) or BUILD_BUG_ON failed with "idx >= __end_of_fixed_addresses".
+ * So use '__always_inline' and 'const unsigned int fixmap' here.
+ */
+static __always_inline void *patch_map(void *addr, const unsigned int fixmap)
 {
 	uintptr_t uintaddr = (uintptr_t) addr;
 	struct page *page;
@@ -37,7 +42,6 @@ static void *patch_map(void *addr, int fixmap)
 	return (void *)set_fixmap_offset(fixmap, page_to_phys(page) +
 					 (uintaddr & ~PAGE_MASK));
 }
-NOKPROBE_SYMBOL(patch_map);
 
 static void patch_unmap(int fixmap)
 {

arch/riscv/kernel/probes/Makefile

+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o simulate-insn.o
+obj-$(CONFIG_KPROBES)		+= kprobes_trampoline.o
+obj-$(CONFIG_KPROBES_ON_FTRACE)	+= ftrace.o
+obj-$(CONFIG_UPROBES)		+= uprobes.o decode-insn.o simulate-insn.o
+CFLAGS_REMOVE_simulate-insn.o = $(CC_FLAGS_FTRACE)

arch/riscv/kernel/probes/decode-insn.c

+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <asm/sections.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+/* Return:
+ *   INSN_REJECTED     If instruction is one not allowed to kprobe,
+ *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ */
+enum probe_insn __kprobes
+riscv_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *api)
+{
+	probe_opcode_t insn = *addr;
+
+	/*
+	 * Reject instructions list:
+	 */
+	RISCV_INSN_REJECTED(system,		insn);
+	RISCV_INSN_REJECTED(fence,		insn);
+
+	/*
+	 * Simulate instructions list:
+	 * TODO: the REJECTED ones below need to be implemented
+	 */
+#ifdef CONFIG_RISCV_ISA_C
+	RISCV_INSN_REJECTED(c_j,		insn);
+	RISCV_INSN_REJECTED(c_jr,		insn);
+	RISCV_INSN_REJECTED(c_jal,		insn);
+	RISCV_INSN_REJECTED(c_jalr,		insn);
+	RISCV_INSN_REJECTED(c_beqz,		insn);
+	RISCV_INSN_REJECTED(c_bnez,		insn);
+	RISCV_INSN_REJECTED(c_ebreak,		insn);
+#endif
+
+	RISCV_INSN_REJECTED(auipc,		insn);
+	RISCV_INSN_REJECTED(branch,		insn);
+
+	RISCV_INSN_SET_SIMULATE(jal,		insn);
+	RISCV_INSN_SET_SIMULATE(jalr,		insn);
+
+	return INSN_GOOD;
+}

arch/riscv/kernel/probes/decode-insn.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _RISCV_KERNEL_KPROBES_DECODE_INSN_H
+#define _RISCV_KERNEL_KPROBES_DECODE_INSN_H
+
+#include <asm/sections.h>
+#include <asm/kprobes.h>
+
+enum probe_insn {
+	INSN_REJECTED,
+	INSN_GOOD_NO_SLOT,
+	INSN_GOOD,
+};
+
+enum probe_insn __kprobes
+riscv_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *asi);
+
+#endif /* _RISCV_KERNEL_KPROBES_DECODE_INSN_H */

arch/riscv/kernel/probes/ftrace.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kprobes.h>
+
+/* Ftrace callback handler for kprobes -- called under preepmt disabed */
+void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+			   struct ftrace_ops *ops, struct ftrace_regs *regs)
+{
+	struct kprobe *p;
+	struct kprobe_ctlblk *kcb;
+
+	p = get_kprobe((kprobe_opcode_t *)ip);
+	if (unlikely(!p) || kprobe_disabled(p))
+		return;
+
+	kcb = get_kprobe_ctlblk();
+	if (kprobe_running()) {
+		kprobes_inc_nmissed_count(p);
+	} else {
+		unsigned long orig_ip = instruction_pointer(&(regs->regs));
+
+		instruction_pointer_set(&(regs->regs), ip);
+
+		__this_cpu_write(current_kprobe, p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+		if (!p->pre_handler || !p->pre_handler(p, &(regs->regs))) {
+			/*
+			 * Emulate singlestep (and also recover regs->pc)
+			 * as if there is a nop
+			 */
+			instruction_pointer_set(&(regs->regs),
+				(unsigned long)p->addr + MCOUNT_INSN_SIZE);
+			if (unlikely(p->post_handler)) {
+				kcb->kprobe_status = KPROBE_HIT_SSDONE;
+				p->post_handler(p, &(regs->regs), 0);
+			}
+			instruction_pointer_set(&(regs->regs), orig_ip);
+		}
+
+		/*
+		 * If pre_handler returns !0, it changes regs->pc. We have to
+		 * skip emulating post_handler.
+		 */
+		__this_cpu_write(current_kprobe, NULL);
+	}
+}
+NOKPROBE_SYMBOL(kprobe_ftrace_handler);
+
+int arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+	p->ainsn.api.insn = NULL;
+	return 0;
+}

arch/riscv/kernel/probes/kprobes.c

+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kprobes.h>
+#include <linux/extable.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
+#include <asm/cacheflush.h>
+#include <asm/bug.h>
+#include <asm/patch.h>
+
+#include "decode-insn.h"
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
+
+static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
+{
+	unsigned long offset = GET_INSN_LENGTH(p->opcode);
+
+	p->ainsn.api.restore = (unsigned long)p->addr + offset;
+
+	patch_text(p->ainsn.api.insn, p->opcode);
+	patch_text((void *)((unsigned long)(p->ainsn.api.insn) + offset),
+		   __BUG_INSN_32);
+}
+
+static void __kprobes arch_prepare_simulate(struct kprobe *p)
+{
+	p->ainsn.api.restore = 0;
+}
+
+static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (p->ainsn.api.handler)
+		p->ainsn.api.handler((u32)p->opcode,
+					(unsigned long)p->addr, regs);
+
+	post_kprobe_handler(kcb, regs);
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	unsigned long probe_addr = (unsigned long)p->addr;
+
+	if (probe_addr & 0x1) {
+		pr_warn("Address not aligned.\n");
+
+		return -EINVAL;
+	}
+
+	/* copy instruction */
+	p->opcode = *p->addr;
+
+	/* decode instruction */
+	switch (riscv_probe_decode_insn(p->addr, &p->ainsn.api)) {
+	case INSN_REJECTED:	/* insn not supported */
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:	/* insn need simulation */
+		p->ainsn.api.insn = NULL;
+		break;
+
+	case INSN_GOOD:	/* instruction uses slot */
+		p->ainsn.api.insn = get_insn_slot();
+		if (!p->ainsn.api.insn)
+			return -ENOMEM;
+		break;
+	}
+
+	/* prepare the instruction */
+	if (p->ainsn.api.insn)
+		arch_prepare_ss_slot(p);
+	else
+		arch_prepare_simulate(p);
+
+	return 0;
+}
+
+/* install breakpoint in text */
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	if ((p->opcode & __INSN_LENGTH_MASK) == __INSN_LENGTH_32)
+		patch_text(p->addr, __BUG_INSN_32);
+	else
+		patch_text(p->addr, __BUG_INSN_16);
+}
+
+/* remove breakpoint from text */
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	patch_text(p->addr, p->opcode);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+	__this_cpu_write(current_kprobe, p);
+}
+
+/*
+ * Interrupts need to be disabled before single-step mode is set, and not
+ * reenabled until after single-step mode ends.
+ * Without disabling interrupt on local CPU, there is a chance of
+ * interrupt occurrence in the period of exception return and  start of
+ * out-of-line single-step, that result in wrongly single stepping
+ * into the interrupt handler.
+ */
+static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	kcb->saved_status = regs->status;
+	regs->status &= ~SR_SPIE;
+}
+
+static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	regs->status = kcb->saved_status;
+}
+
+static void __kprobes
+set_ss_context(struct kprobe_ctlblk *kcb, unsigned long addr, struct kprobe *p)
+{
+	unsigned long offset = GET_INSN_LENGTH(p->opcode);
+
+	kcb->ss_ctx.ss_pending = true;
+	kcb->ss_ctx.match_addr = addr + offset;
+}
+
+static void __kprobes clear_ss_context(struct kprobe_ctlblk *kcb)
+{
+	kcb->ss_ctx.ss_pending = false;
+	kcb->ss_ctx.match_addr = 0;
+}
+
+static void __kprobes setup_singlestep(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb, int reenter)
+{
+	unsigned long slot;
+
+	if (reenter) {
+		save_previous_kprobe(kcb);
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_REENTER;
+	} else {
+		kcb->kprobe_status = KPROBE_HIT_SS;
+	}
+
+	if (p->ainsn.api.insn) {
+		/* prepare for single stepping */
+		slot = (unsigned long)p->ainsn.api.insn;
+
+		set_ss_context(kcb, slot, p);	/* mark pending ss */
+
+		/* IRQs and single stepping do not mix well. */
+		kprobes_save_local_irqflag(kcb, regs);
+
+		instruction_pointer_set(regs, slot);
+	} else {
+		/* insn simulation */
+		arch_simulate_insn(p, regs);
+	}
+}
+
+static int __kprobes reenter_kprobe(struct kprobe *p,
+				    struct pt_regs *regs,
+				    struct kprobe_ctlblk *kcb)
+{
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SSDONE:
+	case KPROBE_HIT_ACTIVE:
+		kprobes_inc_nmissed_count(p);
+		setup_singlestep(p, regs, kcb, 1);
+		break;
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		pr_warn("Unrecoverable kprobe detected.\n");
+		dump_kprobe(p);
+		BUG();
+		break;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+
+	if (!cur)
+		return;
+
+	/* return addr restore if non-branching insn */
+	if (cur->ainsn.api.restore != 0)
+		regs->epc = cur->ainsn.api.restore;
+
+	/* restore back original saved kprobe variables and continue */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		return;
+	}
+
+	/* call post handler */
+	kcb->kprobe_status = KPROBE_HIT_SSDONE;
+	if (cur->post_handler)	{
+		/* post_handler can hit breakpoint and single step
+		 * again, so we enable D-flag for recursive exception.
+		 */
+		cur->post_handler(cur, regs, 0);
+	}
+
+	reset_current_kprobe();
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe and the ip points back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		regs->epc = (unsigned long) cur->addr;
+		if (!instruction_pointer(regs))
+			BUG();
+
+		if (kcb->kprobe_status == KPROBE_REENTER)
+			restore_previous_kprobe(kcb);
+		else
+			reset_current_kprobe();
+
+		break;
+	case KPROBE_HIT_ACTIVE:
+	case KPROBE_HIT_SSDONE:
+		/*
+		 * We increment the nmissed count for accounting,
+		 * we can also use npre/npostfault count for accounting
+		 * these specific fault cases.
+		 */
+		kprobes_inc_nmissed_count(cur);
+
+		/*
+		 * We come here because instructions in the pre/post
+		 * handler caused the page_fault, this could happen
+		 * if handler tries to access user space by
+		 * copy_from_user(), get_user() etc. Let the
+		 * user-specified handler try to fix it first.
+		 */
+		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+			return 1;
+
+		/*
+		 * In case the user-specified fault handler returned
+		 * zero, try to fix up.
+		 */
+		if (fixup_exception(regs))
+			return 1;
+	}
+	return 0;
+}
+
+bool __kprobes
+kprobe_breakpoint_handler(struct pt_regs *regs)
+{
+	struct kprobe *p, *cur_kprobe;
+	struct kprobe_ctlblk *kcb;
+	unsigned long addr = instruction_pointer(regs);
+
+	kcb = get_kprobe_ctlblk();
+	cur_kprobe = kprobe_running();
+
+	p = get_kprobe((kprobe_opcode_t *) addr);
+
+	if (p) {
+		if (cur_kprobe) {
+			if (reenter_kprobe(p, regs, kcb))
+				return true;
+		} else {
+			/* Probe hit */
+			set_current_kprobe(p);
+			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+			/*
+			 * If we have no pre-handler or it returned 0, we
+			 * continue with normal processing.  If we have a
+			 * pre-handler and it returned non-zero, it will
+			 * modify the execution path and no need to single
+			 * stepping. Let's just reset current kprobe and exit.
+			 *
+			 * pre_handler can hit a breakpoint and can step thru
+			 * before return.
+			 */
+			if (!p->pre_handler || !p->pre_handler(p, regs))
+				setup_singlestep(p, regs, kcb, 0);
+			else
+				reset_current_kprobe();
+		}
+		return true;
+	}
+
+	/*
+	 * The breakpoint instruction was removed right
+	 * after we hit it.  Another cpu has removed
+	 * either a probepoint or a debugger breakpoint
+	 * at this address.  In either case, no further
+	 * handling of this interrupt is appropriate.
+	 * Return back to original instruction, and continue.
+	 */
+	return false;
+}
+
+bool __kprobes
+kprobe_single_step_handler(struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if ((kcb->ss_ctx.ss_pending)
+	    && (kcb->ss_ctx.match_addr == instruction_pointer(regs))) {
+		clear_ss_context(kcb);	/* clear pending ss */
+
+		kprobes_restore_local_irqflag(kcb, regs);
+
+		post_kprobe_handler(kcb, regs);
+		return true;
+	}
+	return false;
+}
+
+/*
+ * Provide a blacklist of symbols identifying ranges which cannot be kprobed.
+ * This blacklist is exposed to userspace via debugfs (kprobes/blacklist).
+ */
+int __init arch_populate_kprobe_blacklist(void)
+{
+	int ret;
+
+	ret = kprobe_add_area_blacklist((unsigned long)__irqentry_text_start,
+					(unsigned long)__irqentry_text_end);
+	return ret;
+}
+
+void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs)
+{
+	return (void *)kretprobe_trampoline_handler(regs, &kretprobe_trampoline, NULL);
+}
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *)regs->ra;
+	ri->fp = NULL;
+	regs->ra = (unsigned long) &kretprobe_trampoline;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+	return 0;
+}

arch/riscv/kernel/probes/kprobes_trampoline.S

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Author: Patrick Stählin <me@packi.ch>
+ */
+#include <linux/linkage.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+
+	.text
+	.altmacro
+
+	.macro save_all_base_regs
+	REG_S x1,  PT_RA(sp)
+	REG_S x3,  PT_GP(sp)
+	REG_S x4,  PT_TP(sp)
+	REG_S x5,  PT_T0(sp)
+	REG_S x6,  PT_T1(sp)
+	REG_S x7,  PT_T2(sp)
+	REG_S x8,  PT_S0(sp)
+	REG_S x9,  PT_S1(sp)
+	REG_S x10, PT_A0(sp)
+	REG_S x11, PT_A1(sp)
+	REG_S x12, PT_A2(sp)
+	REG_S x13, PT_A3(sp)
+	REG_S x14, PT_A4(sp)
+	REG_S x15, PT_A5(sp)
+	REG_S x16, PT_A6(sp)
+	REG_S x17, PT_A7(sp)
+	REG_S x18, PT_S2(sp)
+	REG_S x19, PT_S3(sp)
+	REG_S x20, PT_S4(sp)
+	REG_S x21, PT_S5(sp)
+	REG_S x22, PT_S6(sp)
+	REG_S x23, PT_S7(sp)
+	REG_S x24, PT_S8(sp)
+	REG_S x25, PT_S9(sp)
+	REG_S x26, PT_S10(sp)
+	REG_S x27, PT_S11(sp)
+	REG_S x28, PT_T3(sp)
+	REG_S x29, PT_T4(sp)
+	REG_S x30, PT_T5(sp)
+	REG_S x31, PT_T6(sp)
+	.endm
+
+	.macro restore_all_base_regs
+	REG_L x3,  PT_GP(sp)
+	REG_L x4,  PT_TP(sp)
+	REG_L x5,  PT_T0(sp)
+	REG_L x6,  PT_T1(sp)
+	REG_L x7,  PT_T2(sp)
+	REG_L x8,  PT_S0(sp)
+	REG_L x9,  PT_S1(sp)
+	REG_L x10, PT_A0(sp)
+	REG_L x11, PT_A1(sp)
+	REG_L x12, PT_A2(sp)
+	REG_L x13, PT_A3(sp)
+	REG_L x14, PT_A4(sp)
+	REG_L x15, PT_A5(sp)
+	REG_L x16, PT_A6(sp)
+	REG_L x17, PT_A7(sp)
+	REG_L x18, PT_S2(sp)
+	REG_L x19, PT_S3(sp)
+	REG_L x20, PT_S4(sp)
+	REG_L x21, PT_S5(sp)
+	REG_L x22, PT_S6(sp)
+	REG_L x23, PT_S7(sp)
+	REG_L x24, PT_S8(sp)
+	REG_L x25, PT_S9(sp)
+	REG_L x26, PT_S10(sp)
+	REG_L x27, PT_S11(sp)
+	REG_L x28, PT_T3(sp)
+	REG_L x29, PT_T4(sp)
+	REG_L x30, PT_T5(sp)
+	REG_L x31, PT_T6(sp)
+	.endm
+
+ENTRY(kretprobe_trampoline)
+	addi sp, sp, -(PT_SIZE_ON_STACK)
+	save_all_base_regs
+
+	move a0, sp /* pt_regs */
+
+	call trampoline_probe_handler
+
+	/* use the result as the return-address */
+	move ra, a0
+
+	restore_all_base_regs
+	addi sp, sp, PT_SIZE_ON_STACK
+
+	ret
+ENDPROC(kretprobe_trampoline)

arch/riscv/kernel/signal.c

@@ -309,6 +309,9 @@ static void do_signal(struct pt_regs *regs)
 asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
 					   unsigned long thread_info_flags)
 {
+	if (thread_info_flags & _TIF_UPROBE)
+		uprobe_notify_resume(regs);
+
 	/* Handle pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
 		do_signal(regs);

arch/riscv/kernel/soc.c

@@ -26,30 +26,3 @@ void __init soc_early_init(void)
 		}
 	}
 }
-
-static bool soc_builtin_dtb_match(unsigned long vendor_id,
-				unsigned long arch_id, unsigned long imp_id,
-				const struct soc_builtin_dtb *entry)
-{
-	return entry->vendor_id == vendor_id &&
-	       entry->arch_id == arch_id &&
-	       entry->imp_id == imp_id;
-}
-
-void * __init soc_lookup_builtin_dtb(void)
-{
-	unsigned long vendor_id, arch_id, imp_id;
-	const struct soc_builtin_dtb *s;
-
-	__asm__ ("csrr %0, mvendorid" : "=r"(vendor_id));
-	__asm__ ("csrr %0, marchid" : "=r"(arch_id));
-	__asm__ ("csrr %0, mimpid" : "=r"(imp_id));
-
-	for (s = (void *)&__soc_builtin_dtb_table_start;
-	     (void *)s < (void *)&__soc_builtin_dtb_table_end; s++) {
-		if (soc_builtin_dtb_match(vendor_id, arch_id, imp_id, s))
-			return s->dtb_func();
-	}
-
-	return NULL;
-}