Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 8abe5e77 编写于 作者: S Shawn Guo 提交者： Vinod Koul
浏览文件
操作

phy: qcom-qmp: Add QCM2290 USB3 PHY support 

Enable QCM2290 USB3 PHY support by adding the qmp_phy_cfg data which are
taken from downstream kernel.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210927064829.5752-3-shawn.guo@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>
上级 0b7c7ebe
隐藏空白更改
内联 并排
Showing with 145 addition and 0 deletion
drivers/phy/qualcomm/phy-qcom-qmp.c
浏览文件 @ 8abe5e77
......@@ -135,6 +135,8 @@ enum qphy_reg_layout {
QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
QPHY_PCS_POWER_DOWN_CONTROL,
/* PCS_MISC registers */
QPHY_PCS_MISC_TYPEC_CTRL,
/* Keep last to ensure regs_layout arrays are properly initialized */
QPHY_LAYOUT_SIZE
};
......@@ -229,6 +231,16 @@ static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
};
static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
[QPHY_START_CTRL] = 0x08,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
[QPHY_PCS_STATUS] = 0x174,
[QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
};
static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = 0x00,
[QPHY_PCS_READY_STATUS] = 0x160,
......@@ -2761,6 +2773,99 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
};
static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
};
static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
};
static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
};
struct qmp_phy;
/* struct qmp_phy_cfg - per-PHY initialization config */
......@@ -2995,6 +3100,10 @@ static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
"aux", "cfg_ahb", "ref"
};
static const char * const qcm2290_usb3phy_clk_l[] = {
"cfg_ahb", "ref", "com_aux",
};
/* list of resets */
static const char * const msm8996_pciephy_reset_l[] = {
"phy", "common", "cfg",
......@@ -3008,6 +3117,10 @@ static const char * const sc7180_usb3phy_reset_l[] = {
"phy",
};
static const char * const qcm2290_usb3phy_reset_l[] = {
"phy_phy", "phy",
};
static const char * const sdm845_pciephy_reset_l[] = {
"phy",
};
......@@ -3974,6 +4087,33 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};
static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
.serdes_tbl = qcm2290_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
.tx_tbl = qcm2290_usb3_tx_tbl,
.tx_tbl_num = ARRAY_SIZE(qcm2290_usb3_tx_tbl),
.rx_tbl = qcm2290_usb3_rx_tbl,
.rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
.pcs_tbl = qcm2290_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
.clk_list = qcm2290_usb3phy_clk_l,
.num_clks = ARRAY_SIZE(qcm2290_usb3phy_clk_l),
.reset_list = qcm2290_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qcm2290_usb3phy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
.phy_status = PHYSTATUS,
.is_dual_lane_phy = true,
};
static void qcom_qmp_phy_configure_lane(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
......@@ -5605,6 +5745,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
.data = &sm8350_usb3_uniphy_cfg,
}, {
.compatible = "qcom,qcm2290-qmp-usb3-phy",
.data = &qcm2290_usb3phy_cfg,
},
{ },
};
......
drivers/phy/qualcomm/phy-qcom-qmp.h
浏览文件 @ 8abe5e77
......@@ -169,6 +169,7 @@
#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac
#define QSERDES_COM_RESETSM_CNTRL 0x0b4
#define QSERDES_COM_RESETSM_CNTRL2 0x0b8
#define QSERDES_COM_RESTRIM_CTRL 0x0bc
#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4
#define QSERDES_COM_LOCK_CMP_EN 0x0c8
......@@ -181,6 +182,7 @@
#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8
#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec
#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0
#define QSERDES_COM_INTEGLOOP_INITVAL 0x100
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或