Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 8a8e9c28 编写于 作者: H Hartmut Hackmann 提交者： Mauro Carvalho Chehab
浏览文件
操作

DVB (2421): Fixed oddities at firmware download 


- Fixed oddities at firmware download
- more tolerant vs crystal frequency offset
- lower sampling clock
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
上级 d3707add
隐藏空白更改
内联 并排
Showing with 90 addition and 48 deletion
drivers/media/dvb/frontends/tda1004x.c
浏览文件 @ 8a8e9c28
......@@ -271,32 +271,57 @@ static int tda10045h_set_bandwidth(struct tda1004x_state *state,
static int tda10046h_set_bandwidth(struct tda1004x_state *state,
fe_bandwidth_t bandwidth)
{
static u8 bandwidth_6mhz[] = { 0x80, 0x15, 0xfe, 0xab, 0x8e };
static u8 bandwidth_7mhz[] = { 0x6e, 0x02, 0x53, 0xc8, 0x25 };
static u8 bandwidth_8mhz[] = { 0x60, 0x12, 0xa8, 0xe4, 0xbd };
static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
int tda10046_clk53m;
if ((state->config->if_freq == TDA10046_FREQ_045) ||
(state->config->if_freq == TDA10046_FREQ_052))
tda10046_clk53m = 0;
else
tda10046_clk53m = 1;
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz, sizeof(bandwidth_6mhz));
if (tda10046_clk53m)
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
sizeof(bandwidth_6mhz_53M));
else
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
sizeof(bandwidth_6mhz_48M));
if (state->config->if_freq == TDA10046_FREQ_045) {
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x09);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x4f);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
}
break;
case BANDWIDTH_7_MHZ:
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz, sizeof(bandwidth_7mhz));
if (tda10046_clk53m)
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
sizeof(bandwidth_7mhz_53M));
else
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
sizeof(bandwidth_7mhz_48M));
if (state->config->if_freq == TDA10046_FREQ_045) {
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x79);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
}
break;
case BANDWIDTH_8_MHZ:
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz, sizeof(bandwidth_8mhz));
if (tda10046_clk53m)
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
sizeof(bandwidth_8mhz_53M));
else
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
sizeof(bandwidth_8mhz_48M));
if (state->config->if_freq == TDA10046_FREQ_045) {
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0b);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xa3);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
}
break;
......@@ -418,9 +443,22 @@ static int tda10045_fwupload(struct dvb_frontend* fe)
static void tda10046_init_plls(struct dvb_frontend* fe)
{
struct tda1004x_state* state = fe->demodulator_priv;
int tda10046_clk53m;
if ((state->config->if_freq == TDA10046_FREQ_045) ||
(state->config->if_freq == TDA10046_FREQ_052))
tda10046_clk53m = 0;
else
tda10046_clk53m = 1;
tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x0a); // PLL M = 10
if(tda10046_clk53m) {
printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
} else {
printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
}
if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__);
tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
......@@ -428,26 +466,32 @@ static void tda10046_init_plls(struct dvb_frontend* fe)
dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __FUNCTION__);
tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
}
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99);
if(tda10046_clk53m)
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
else
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
/* Note clock frequency is handled implicitly */
switch (state->config->if_freq) {
case TDA10046_FREQ_3617:
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c);
break;
case TDA10046_FREQ_3613:
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x13);
break;
case TDA10046_FREQ_045:
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0b);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xa3);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
break;
case TDA10046_FREQ_052:
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x06);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
break;
case TDA10046_FREQ_3617:
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
break;
case TDA10046_FREQ_3613:
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
break;
}
tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz
/* let the PLLs settle */
msleep(120);
}
static int tda10046_fwupload(struct dvb_frontend* fe)
......@@ -462,13 +506,13 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
/* let the clocks recover from sleep */
msleep(5);
/* The PLLs need to be reprogrammed after sleep */
tda10046_init_plls(fe);
/* don't re-upload unless necessary */
if (tda1004x_check_upload_ok(state) == 0)
return 0;
/* set parameters */
tda10046_init_plls(fe);
if (state->config->request_firmware != NULL) {
/* request the firmware, this will block until someone uploads it */
printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
......@@ -484,7 +528,6 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
return ret;
} else {
/* boot from firmware eeprom */
/* Hac Note: we might need to do some GPIO Magic here */
printk(KERN_INFO "tda1004x: booting from eeprom\n");
tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4);
msleep(300);
......@@ -606,10 +649,9 @@ static int tda10046_init(struct dvb_frontend* fe)
// tda setup
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
tda1004x_write_byteI(state, TDA1004X_AUTO, 7); // select HP stream
tda1004x_write_byteI(state, TDA1004X_CONFC1, 8); // disable pulse killer
tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream
tda1004x_write_byteI(state, TDA1004X_CONFC1, 8); // disable pulse killer
tda10046_init_plls(fe);
switch (state->config->agc_config) {
case TDA10046_AGC_DEFAULT:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
......@@ -626,25 +668,22 @@ static int tda10046_init(struct dvb_frontend* fe)
case TDA10046_AGC_TDA827X:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x0E); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
break;
}
tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // }
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // }
tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // }
tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 1); // IF gain 2, TUN gain 1
tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0xe1); // tristate setup
tda1004x_write_byteI(state, TDA10046H_GPIO_OUT_SEL, 0xcc); // GPIO output config
tda1004x_write_byteI(state, TDA10046H_GPIO_SELECT, 8); // GPIO select
state->initialised = 1;
return 0;
}
......@@ -686,9 +725,9 @@ static int tda1004x_set_fe(struct dvb_frontend* fe,
// Set standard params.. or put them to auto
if ((fe_params->u.ofdm.code_rate_HP == FEC_AUTO) ||
(fe_params->u.ofdm.code_rate_LP == FEC_AUTO) ||
(fe_params->u.ofdm.constellation == QAM_AUTO) ||
(fe_params->u.ofdm.hierarchy_information == HIERARCHY_AUTO)) {
(fe_params->u.ofdm.code_rate_LP == FEC_AUTO) ||
(fe_params->u.ofdm.constellation == QAM_AUTO) ||
(fe_params->u.ofdm.hierarchy_information == HIERARCHY_AUTO)) {
tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1); // enable auto
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); // turn off constellation bits
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits
......@@ -851,6 +890,7 @@ static int tda1004x_set_fe(struct dvb_frontend* fe,
static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_parameters *fe_params)
{
struct tda1004x_state* state = fe->demodulator_priv;
dprintk("%s\n", __FUNCTION__);
// inversion status
......@@ -875,16 +915,18 @@ static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_paramete
break;
}
break;
case TDA1004X_DEMOD_TDA10046:
switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
case 0x60:
case 0x5c:
case 0x54:
fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
break;
case 0x6e:
case 0x6a:
case 0x60:
fe_params->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
break;
case 0x80:
case 0x7b:
case 0x70:
fe_params->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
break;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或