[PATCH] ppc64 iSeries: remove XmPciLpEvent.c

This patch just merges XmPciLpEvent.c into iSeries_irq.c (the only caller of
its only external function).  XmPciLpEvent.c just contained the lowlevel
iSeries irq code.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/ppc64/kernel/Makefile

@@ -21,7 +21,7 @@ pci-obj-$(CONFIG_PPC_MULTIPLATFORM)	+= pci_dn.o pci_direct_iommu.o
 
 obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o iomap.o $(pci-obj-y)
 
-obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o XmPciLpEvent.o \
+obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \
 			     HvCall.o HvLpConfig.o LparData.o \
 			     iSeries_setup.o ItLpQueue.o hvCall.o \
 			     mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \

arch/ppc64/kernel/XmPciLpEvent.c

-/*
- * File XmPciLpEvent.c created by Wayne Holm on Mon Jan 15 2001.
- *
- * This module handles PCI interrupt events sent by the iSeries Hypervisor.
- */
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/ide.h>
-
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/iSeries_irq.h>
-#include <asm/ppcdebug.h>
-
-static long Pci_Interrupt_Count;
-static long Pci_Event_Count;
-
-enum XmPciLpEvent_Subtype {
-	XmPciLpEvent_BusCreated		= 0,	// PHB has been created
-	XmPciLpEvent_BusError		= 1,	// PHB has failed
-	XmPciLpEvent_BusFailed		= 2,	// Msg to Secondary, Primary failed bus
-	XmPciLpEvent_NodeFailed		= 4,	// Multi-adapter bridge has failed
-	XmPciLpEvent_NodeRecovered	= 5,	// Multi-adapter bridge has recovered
-	XmPciLpEvent_BusRecovered	= 12,	// PHB has been recovered
-	XmPciLpEvent_UnQuiesceBus	= 18,	// Secondary bus unqiescing
-	XmPciLpEvent_BridgeError	= 21,	// Bridge Error
-	XmPciLpEvent_SlotInterrupt	= 22	// Slot interrupt
-};
-
-struct XmPciLpEvent_BusInterrupt {
-	HvBusNumber	busNumber;
-	HvSubBusNumber	subBusNumber;
-};
-
-struct XmPciLpEvent_NodeInterrupt {
-	HvBusNumber	busNumber;
-	HvSubBusNumber	subBusNumber;
-	HvAgentId	deviceId;
-};
-
-struct XmPciLpEvent {
-	struct HvLpEvent hvLpEvent;
-
-	union {
-		u64 alignData;			// Align on an 8-byte boundary
-
-		struct {
-			u32		fisr;
-			HvBusNumber	busNumber;
-			HvSubBusNumber	subBusNumber;
-			HvAgentId	deviceId;
-		} slotInterrupt;
-
-		struct XmPciLpEvent_BusInterrupt busFailed;
-		struct XmPciLpEvent_BusInterrupt busRecovered;
-		struct XmPciLpEvent_BusInterrupt busCreated;
-
-		struct XmPciLpEvent_NodeInterrupt nodeFailed;
-		struct XmPciLpEvent_NodeInterrupt nodeRecovered;
-
-	} eventData;
-
-};
-
-static void intReceived(struct XmPciLpEvent *eventParm,
-		struct pt_regs *regsParm)
-{
-	int irq;
-
-	++Pci_Interrupt_Count;
-#if 0
-	PPCDBG(PPCDBG_BUSWALK, "PCI: XmPciLpEvent.c: intReceived\n");
-#endif
-
-	switch (eventParm->hvLpEvent.xSubtype) {
-	case XmPciLpEvent_SlotInterrupt:
-		irq = eventParm->hvLpEvent.xCorrelationToken;
-		/* Dispatch the interrupt handlers for this irq */
-		ppc_irq_dispatch_handler(regsParm, irq);
-		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
-			eventParm->eventData.slotInterrupt.subBusNumber,
-			eventParm->eventData.slotInterrupt.deviceId);
-		break;
-		/* Ignore error recovery events for now */
-	case XmPciLpEvent_BusCreated:
-		printk(KERN_INFO "XmPciLpEvent.c: system bus %d created\n",
-			eventParm->eventData.busCreated.busNumber);
-		break;
-	case XmPciLpEvent_BusError:
-	case XmPciLpEvent_BusFailed:
-		printk(KERN_INFO "XmPciLpEvent.c: system bus %d failed\n",
-			eventParm->eventData.busFailed.busNumber);
-		break;
-	case XmPciLpEvent_BusRecovered:
-	case XmPciLpEvent_UnQuiesceBus:
-		printk(KERN_INFO "XmPciLpEvent.c: system bus %d recovered\n",
-			eventParm->eventData.busRecovered.busNumber);
-		break;
-	case XmPciLpEvent_NodeFailed:
-	case XmPciLpEvent_BridgeError:
-		printk(KERN_INFO
-			"XmPciLpEvent.c: multi-adapter bridge %d/%d/%d failed\n",
-			eventParm->eventData.nodeFailed.busNumber,
-			eventParm->eventData.nodeFailed.subBusNumber,
-			eventParm->eventData.nodeFailed.deviceId);
-		break;
-	case XmPciLpEvent_NodeRecovered:
-		printk(KERN_INFO
-			"XmPciLpEvent.c: multi-adapter bridge %d/%d/%d recovered\n",
-			eventParm->eventData.nodeRecovered.busNumber,
-			eventParm->eventData.nodeRecovered.subBusNumber,
-			eventParm->eventData.nodeRecovered.deviceId);
-		break;
-	default:
-		printk(KERN_ERR
-			"XmPciLpEvent.c: unrecognized event subtype 0x%x\n",
-			eventParm->hvLpEvent.xSubtype);
-		break;
-	}
-}
-
-static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
-		struct pt_regs *regsParm)
-{
-#ifdef CONFIG_PCI
-#if 0
-	PPCDBG(PPCDBG_BUSWALK, "XmPciLpEvent_handler, type 0x%x\n",
-			eventParm->xType);
-#endif
-	++Pci_Event_Count;
-
-	if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
-		switch (eventParm->xFlags.xFunction) {
-		case HvLpEvent_Function_Int:
-			intReceived((struct XmPciLpEvent *)eventParm, regsParm);
-			break;
-		case HvLpEvent_Function_Ack:
-			printk(KERN_ERR
-				"XmPciLpEvent.c: unexpected ack received\n");
-			break;
-		default:
-			printk(KERN_ERR
-				"XmPciLpEvent.c: unexpected event function %d\n",
-				(int)eventParm->xFlags.xFunction);
-			break;
-		}
-	} else if (eventParm)
-		printk(KERN_ERR
-			"XmPciLpEvent.c: Unrecognized PCI event type 0x%x\n",
-			(int)eventParm->xType);
-	else
-		printk(KERN_ERR "XmPciLpEvent.c: NULL event received\n");
-#endif
-}
-
-/* This should be called sometime prior to buswalk (init_IRQ would be good) */
-int XmPciLpEvent_init()
-{
-	int xRc;
-
-	PPCDBG(PPCDBG_BUSWALK,
-			"XmPciLpEvent_init, Register Event type 0x%04X\n",
-			HvLpEvent_Type_PciIo);
-
-	xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
-			&XmPciLpEvent_handler);
-	if (xRc == 0) {
-		xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
-		if (xRc != 0)
-			printk(KERN_ERR "XmPciLpEvent.c: open event path "
-					"failed with rc 0x%x\n", xRc);
-	} else
-		printk(KERN_ERR "XmPciLpEvent.c: register handler "
-				"failed with rc 0x%x\n", xRc);
-	return xRc;
-}

arch/ppc64/kernel/iSeries_irq.c

 /*
  * This module supports the iSeries PCI bus interrupt handling
  * Copyright (C) 20yy  <Robert L Holtorf> <IBM Corp>
+ * Copyright (C) 2004-2005 IBM Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,6 +23,7 @@
  *   Created, December 13, 2000 by Wayne Holm
  * End Change Activity
  */
+#include <linux/config.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/threads.h>
@@ -30,11 +32,12 @@
 #include <linux/string.h>
 #include <linux/bootmem.h>
 #include <linux/ide.h>
-
 #include <linux/irq.h>
 #include <linux/spinlock.h>
-#include <asm/ppcdebug.h>
 
+#include <asm/ppcdebug.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/HvLpEvent.h>
 #include <asm/iSeries/HvCallPci.h>
 #include <asm/iSeries/HvCallXm.h>
 #include <asm/iSeries/iSeries_irq.h>
@@ -46,6 +49,169 @@ unsigned int virt_irq_to_real_map[NR_IRQS];
 /* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */
 static int next_virtual_irq = 2;
 
+static long Pci_Interrupt_Count;
+static long Pci_Event_Count;
+
+enum XmPciLpEvent_Subtype {
+	XmPciLpEvent_BusCreated		= 0,	// PHB has been created
+	XmPciLpEvent_BusError		= 1,	// PHB has failed
+	XmPciLpEvent_BusFailed		= 2,	// Msg to Secondary, Primary failed bus
+	XmPciLpEvent_NodeFailed		= 4,	// Multi-adapter bridge has failed
+	XmPciLpEvent_NodeRecovered	= 5,	// Multi-adapter bridge has recovered
+	XmPciLpEvent_BusRecovered	= 12,	// PHB has been recovered
+	XmPciLpEvent_UnQuiesceBus	= 18,	// Secondary bus unqiescing
+	XmPciLpEvent_BridgeError	= 21,	// Bridge Error
+	XmPciLpEvent_SlotInterrupt	= 22	// Slot interrupt
+};
+
+struct XmPciLpEvent_BusInterrupt {
+	HvBusNumber	busNumber;
+	HvSubBusNumber	subBusNumber;
+};
+
+struct XmPciLpEvent_NodeInterrupt {
+	HvBusNumber	busNumber;
+	HvSubBusNumber	subBusNumber;
+	HvAgentId	deviceId;
+};
+
+struct XmPciLpEvent {
+	struct HvLpEvent hvLpEvent;
+
+	union {
+		u64 alignData;			// Align on an 8-byte boundary
+
+		struct {
+			u32		fisr;
+			HvBusNumber	busNumber;
+			HvSubBusNumber	subBusNumber;
+			HvAgentId	deviceId;
+		} slotInterrupt;
+
+		struct XmPciLpEvent_BusInterrupt busFailed;
+		struct XmPciLpEvent_BusInterrupt busRecovered;
+		struct XmPciLpEvent_BusInterrupt busCreated;
+
+		struct XmPciLpEvent_NodeInterrupt nodeFailed;
+		struct XmPciLpEvent_NodeInterrupt nodeRecovered;
+
+	} eventData;
+
+};
+
+static void intReceived(struct XmPciLpEvent *eventParm,
+		struct pt_regs *regsParm)
+{
+	int irq;
+
+	++Pci_Interrupt_Count;
+#if 0
+	PPCDBG(PPCDBG_BUSWALK, "PCI: XmPciLpEvent.c: intReceived\n");
+#endif
+
+	switch (eventParm->hvLpEvent.xSubtype) {
+	case XmPciLpEvent_SlotInterrupt:
+		irq = eventParm->hvLpEvent.xCorrelationToken;
+		/* Dispatch the interrupt handlers for this irq */
+		ppc_irq_dispatch_handler(regsParm, irq);
+		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
+			eventParm->eventData.slotInterrupt.subBusNumber,
+			eventParm->eventData.slotInterrupt.deviceId);
+		break;
+		/* Ignore error recovery events for now */
+	case XmPciLpEvent_BusCreated:
+		printk(KERN_INFO "XmPciLpEvent.c: system bus %d created\n",
+			eventParm->eventData.busCreated.busNumber);
+		break;
+	case XmPciLpEvent_BusError:
+	case XmPciLpEvent_BusFailed:
+		printk(KERN_INFO "XmPciLpEvent.c: system bus %d failed\n",
+			eventParm->eventData.busFailed.busNumber);
+		break;
+	case XmPciLpEvent_BusRecovered:
+	case XmPciLpEvent_UnQuiesceBus:
+		printk(KERN_INFO "XmPciLpEvent.c: system bus %d recovered\n",
+			eventParm->eventData.busRecovered.busNumber);
+		break;
+	case XmPciLpEvent_NodeFailed:
+	case XmPciLpEvent_BridgeError:
+		printk(KERN_INFO
+			"XmPciLpEvent.c: multi-adapter bridge %d/%d/%d failed\n",
+			eventParm->eventData.nodeFailed.busNumber,
+			eventParm->eventData.nodeFailed.subBusNumber,
+			eventParm->eventData.nodeFailed.deviceId);
+		break;
+	case XmPciLpEvent_NodeRecovered:
+		printk(KERN_INFO
+			"XmPciLpEvent.c: multi-adapter bridge %d/%d/%d recovered\n",
+			eventParm->eventData.nodeRecovered.busNumber,
+			eventParm->eventData.nodeRecovered.subBusNumber,
+			eventParm->eventData.nodeRecovered.deviceId);
+		break;
+	default:
+		printk(KERN_ERR
+			"XmPciLpEvent.c: unrecognized event subtype 0x%x\n",
+			eventParm->hvLpEvent.xSubtype);
+		break;
+	}
+}
+
+static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
+		struct pt_regs *regsParm)
+{
+#ifdef CONFIG_PCI
+#if 0
+	PPCDBG(PPCDBG_BUSWALK, "XmPciLpEvent_handler, type 0x%x\n",
+			eventParm->xType);
+#endif
+	++Pci_Event_Count;
+
+	if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
+		switch (eventParm->xFlags.xFunction) {
+		case HvLpEvent_Function_Int:
+			intReceived((struct XmPciLpEvent *)eventParm, regsParm);
+			break;
+		case HvLpEvent_Function_Ack:
+			printk(KERN_ERR
+				"XmPciLpEvent.c: unexpected ack received\n");
+			break;
+		default:
+			printk(KERN_ERR
+				"XmPciLpEvent.c: unexpected event function %d\n",
+				(int)eventParm->xFlags.xFunction);
+			break;
+		}
+	} else if (eventParm)
+		printk(KERN_ERR
+			"XmPciLpEvent.c: Unrecognized PCI event type 0x%x\n",
+			(int)eventParm->xType);
+	else
+		printk(KERN_ERR "XmPciLpEvent.c: NULL event received\n");
+#endif
+}
+
+/* This should be called sometime prior to buswalk (init_IRQ would be good) */
+int XmPciLpEvent_init()
+{
+	int xRc;
+
+	PPCDBG(PPCDBG_BUSWALK,
+			"XmPciLpEvent_init, Register Event type 0x%04X\n",
+			HvLpEvent_Type_PciIo);
+
+	xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+			&XmPciLpEvent_handler);
+	if (xRc == 0) {
+		xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+		if (xRc != 0)
+			printk(KERN_ERR "XmPciLpEvent.c: open event path "
+					"failed with rc 0x%x\n", xRc);
+	} else
+		printk(KERN_ERR "XmPciLpEvent.c: register handler "
+				"failed with rc 0x%x\n", xRc);
+	return xRc;
+}
+
 /* This is called by init_IRQ.  set in ppc_md.init_IRQ by iSeries_setup.c */
 void __init iSeries_init_IRQ(void)
 {