MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers

We set the pin configuration for the jz4780-nand and jz4780-uart
drivers.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/mips/boot/dts/ingenic/ci20.dts

@@ -29,18 +29,30 @@
 
 &uart0 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart0>;
 };
 
 &uart1 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
 };
 
 &uart3 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
 };
 
 &uart4 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart4>;
 };
 
 &nemc {
@@ -61,6 +73,13 @@
 		ingenic,nemc-tAW = <15>;
 		ingenic,nemc-tSTRV = <100>;
 
+		/*
+		 * Only CLE/ALE are needed for the devices that are connected, rather
+		 * than the full address line set.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
 		nand@1 {
 			reg = <1>;
 
@@ -69,6 +88,9 @@
 			nand-ecc-mode = "hw";
 			nand-on-flash-bbt;
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_nemc_cs1>;
+
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <2>;
@@ -106,3 +128,41 @@
 &bch {
 	status = "okay";
 };
+
+&pinctrl {
+	pins_uart0: uart0 {
+		function = "uart0";
+		groups = "uart0-data";
+		bias-disable;
+	};
+
+	pins_uart1: uart1 {
+		function = "uart1";
+		groups = "uart1-data";
+		bias-disable;
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data", "uart2-hwflow";
+		bias-disable;
+	};
+
+	pins_uart4: uart4 {
+		function = "uart4";
+		groups = "uart4-data";
+		bias-disable;
+	};
+
+	pins_nemc: nemc {
+		function = "nemc";
+		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+		bias-disable;
+	};
+
+	pins_nemc_cs1: nemc-cs1 {
+		function = "nemc-cs1";
+		groups = "nemc-cs1";
+		bias-disable;
+	};
+};