ASoC: tas2552: Correct PDM configuration register bit definitions

The PDM clock can be selected via bit0-1.
PDM_DATA_ES bit is at bit2.

The code were trying to select BCLK as PDM reference clock but instead
it was selecting PLL and set the DATA_ES bit to 1.
Selecting the PLL output as reference clock as default does make sense,
but the driver should not change the PDM data edge.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sound/soc/codecs/tas2552.c

@@ -376,7 +376,7 @@ static int tas2552_codec_probe(struct snd_soc_codec *codec)
 				TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ);
 	snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I);
 	snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8);
-	snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_BCLK_SEL);
+	snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_CLK_SEL_PLL);
 	snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 |
 				TAS2552_APT_THRESH_2_1_7);
 

sound/soc/codecs/tas2552.h

@@ -99,12 +99,12 @@
 #define TAS2552_PDM_DATA_V_I	(0x11 << 6)
 
 /* PDM CFG Register */
-#define TAS2552_PDM_DATA_ES_RISE 0x4
-
-#define TAS2552_PDM_PLL_CLK_SEL 0x00
-#define TAS2552_PDM_IV_CLK_SEL	(1 << 1)
-#define TAS2552_PDM_BCLK_SEL	(1 << 2)
-#define TAS2552_PDM_MCLK_SEL	(1 << 3)
+#define TAS2552_PDM_CLK_SEL_PLL		(0x0 << 0)
+#define TAS2552_PDM_CLK_SEL_IVCLKIN	(0x1 << 0)
+#define TAS2552_PDM_CLK_SEL_BCLK	(0x2 << 0)
+#define TAS2552_PDM_CLK_SEL_MCLK	(0x3 << 0)
+#define TAS2552_PDM_CLK_SEL_MASK	TAS2552_PDM_CLK_SEL_MCLK
+#define TAS2552_PDM_DATA_ES	 	(1 << 2)
 
 /* Boost pass-through register */
 #define TAS2552_APT_DELAY_50	0x00