i2c: Delete outdated x1205 driver documentation

The x1205 driver moved to the RTC subsystem and was significantly
modified since then, so just delete the outdated documentation.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>

Documentation/i2c/chips/x1205

-Kernel driver x1205
-===================
-
-Supported chips:
-  * Xicor X1205 RTC
-    Prefix: 'x1205'
-    Addresses scanned: none
-    Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
-
-Authors:
-	Karen Spearel <kas11@tampabay.rr.com>,
-	Alessandro Zummo <a.zummo@towertech.it>
-
-Description
------------
-
-This module aims to provide complete access to the Xicor X1205 RTC.
-Recently Xicor has merged with Intersil, but the chip is
-still sold under the Xicor brand.
-
-This chip is located at address 0x6f and uses a 2-byte register addressing.
-Two bytes need to be written to read a single register, while most
-other chips just require one and take the second one as the data
-to be written. To prevent corrupting unknown chips, the user must
-explicitely set the probe parameter.
-
-example:
-
-modprobe x1205 probe=0,0x6f
-
-The module supports one more option, hctosys, which is used to set the
-software clock from the x1205. On systems where the x1205 is the
-only hardware rtc, this parameter could be used to achieve a correct
-date/time earlier in the system boot sequence.
-
-example:
-
-modprobe x1205 probe=0,0x6f hctosys=1

drivers/rtc/rtc-x1205.c

@@ -9,6 +9,9 @@
  *
  * based on a lot of other RTC drivers.
  *
+ * Information and datasheet:
+ * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -26,7 +29,7 @@
  * Two bytes need to be written to read a single register,
  * while most other chips just require one and take the second
  * one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitely set the probe parameter.
+ * unknown chips, the user must explicitly set the probe parameter.
  */
 
 static unsigned short normal_i2c[] = { I2C_CLIENT_END };