提交 88fc68a2 编写于 作者: B Ben Dooks

ARM: S3C64XX: Move device and device setup into mach-s3c64xx

Move the S3C64XX specific device and setup files into mach-s3c64xx as
they are unlikely to be used outside of this code.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
上级 ed618aff
......@@ -26,6 +26,32 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
# platform specific device setup
config S3C64XX_SETUP_I2C0
bool
default y
help
Common setup code for i2c bus 0.
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
config S3C64XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
Common setup code for S3C64XX SDHCI GPIO configurations
# S36400 Macchine support
config MACH_SMDK6400
......
......@@ -18,9 +18,13 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
obj-y += irq.o
obj-y += irq-eint.o
# setup support
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# PM
......@@ -33,3 +37,10 @@ obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
# device support
obj-y += dev-uart.o
obj-y += dev-rtc.o
obj-$(CONFIG_S3C_ADC) += dev-adc.o
obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
......@@ -17,8 +17,8 @@
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
#include <plat/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
#include <plat/irqs.h>
......
/* linux/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
*
* Copyright (C) 2009 Samsung Electronics Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
......
......@@ -46,30 +46,4 @@ config S3C64XX_DMA
bool "S3C64XX DMA"
select S3C_DMA
# platform specific device setup
config S3C64XX_SETUP_I2C0
bool
default y
help
Common setup code for i2c bus 0.
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
config S3C64XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
Common setup code for S3C64XX SDHCI GPIO configurations
endif
......@@ -11,9 +11,6 @@ obj-n := dummy.o
obj- :=
# Core files
obj-y += dev-uart.o
obj-y += dev-rtc.o
obj-y += cpu.o
obj-y += clock.o
obj-y += gpiolib.o
......@@ -33,15 +30,3 @@ obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_S3C64XX_DMA) += dma.o
# ADC support
obj-$(CONFIG_S3C_ADC) += dev-adc.o
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册