[media] dib8096P: add the reference board TFE8096P

The intend of this patch is to add the support for the DiBcom reference
board TFE8096P.
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -1641,6 +1641,261 @@ static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
 	return fe_slave == NULL ?  -ENODEV : 0;
 }
 
+/* TFE8096P */
+static struct dibx000_agc_config dib8096p_agc_config[2] = {
+	{
+		.band_caps		= BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		   P_agc_write=0 */
+		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
+			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+			| (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain		= 684,
+		.time_stabiliz	= 10,
+
+		.alpha_level	= 0,
+		.thlock			= 118,
+
+		.wbd_inv		= 0,
+		.wbd_ref		= 1200,
+		.wbd_sel		= 3,
+		.wbd_alpha		= 5,
+
+		.agc1_max		= 65535,
+		.agc1_min		= 0,
+
+		.agc2_max		= 32767,
+		.agc2_min		= 0,
+
+		.agc1_pt1		= 0,
+		.agc1_pt2		= 0,
+		.agc1_pt3		= 105,
+		.agc1_slope1	= 0,
+		.agc1_slope2	= 156,
+		.agc2_pt1		= 105,
+		.agc2_pt2		= 255,
+		.agc2_slope1	= 54,
+		.agc2_slope2	= 0,
+
+		.alpha_mant		= 28,
+		.alpha_exp		= 26,
+		.beta_mant		= 31,
+		.beta_exp		= 51,
+
+		.perform_agc_softsplit = 0,
+	} , {
+		.band_caps		= BAND_FM | BAND_VHF | BAND_CBAND,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		   P_agc_write=0 */
+		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
+			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+			| (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain		= 732,
+		.time_stabiliz  = 10,
+
+		.alpha_level	= 0,
+		.thlock			= 118,
+
+		.wbd_inv		= 0,
+		.wbd_ref		= 1200,
+		.wbd_sel		= 3,
+		.wbd_alpha		= 5,
+
+		.agc1_max		= 65535,
+		.agc1_min		= 0,
+
+		.agc2_max		= 32767,
+		.agc2_min		= 0,
+
+		.agc1_pt1		= 0,
+		.agc1_pt2		= 0,
+		.agc1_pt3		= 98,
+		.agc1_slope1	= 0,
+		.agc1_slope2	= 167,
+		.agc2_pt1		= 98,
+		.agc2_pt2		= 255,
+		.agc2_slope1	= 52,
+		.agc2_slope2	= 0,
+
+		.alpha_mant		= 28,
+		.alpha_exp		= 26,
+		.beta_mant		= 31,
+		.beta_exp		= 51,
+
+		.perform_agc_softsplit = 0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
+	108000, 13500,
+	1, 9, 1, 0, 0,
+	0, 0, 0, 0, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	(0 << 25) | 0,
+	20199729,
+	12000000,
+};
+
+static struct dib8000_config tfe8096p_dib8000_config = {
+	.output_mpeg2_in_188_bytes	= 1,
+	.hostbus_diversity			= 1,
+	.update_lna					= NULL,
+
+	.agc_config_count			= 2,
+	.agc						= dib8096p_agc_config,
+	.pll						= &dib8096p_clock_config_12_mhz,
+
+	.gpio_dir					= DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.agc_control				= NULL,
+	.diversity_delay			= 48,
+	.output_mode				= OUTMODE_MPEG2_FIFO,
+	.enMpegOutput				= 1,
+};
+
+static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
+	{ 380, 81, 850, 64, 540, 4},
+	{ 860, 51, 866, 21, 375, 4},
+	{1700, 0, 250, 0, 100, 6},
+	{2600, 0, 250, 0, 100, 6},
+	{ 0xFFFF, 0, 0, 0, 0, 0},
+};
+
+static const struct dib0090_config tfe8096p_dib0090_config = {
+	.io.clock_khz			= 12000,
+	.io.pll_bypass			= 0,
+	.io.pll_range			= 0,
+	.io.pll_prediv			= 3,
+	.io.pll_loopdiv			= 6,
+	.io.adc_clock_ratio		= 0,
+	.io.pll_int_loop_filt	= 0,
+	.reset					= dib8096p_tuner_sleep,
+	.sleep					= dib8096p_tuner_sleep,
+
+	.freq_offset_khz_uhf	= -143,
+	.freq_offset_khz_vhf	= -143,
+
+	.get_adc_power			= dib8090_get_adc_power,
+
+	.clkouttobamse			= 1,
+	.analog_output			= 0,
+
+	.wbd_vhf_offset			= 0,
+	.wbd_cband_offset		= 0,
+	.use_pwm_agc			= 1,
+	.clkoutdrive			= 0,
+
+	.fref_clock_ratio		= 1,
+
+	.wbd					= dib8096p_wbd_table,
+
+	.ls_cfg_pad_drv			= 0,
+	.data_tx_drv			= 0,
+	.low_if					= NULL,
+	.in_soc					= 1,
+	.force_cband_input		= 0,
+};
+
+struct dibx090p_adc {
+	u32 freq;			/* RF freq MHz */
+	u32 timf;			/* New Timf */
+	u32 pll_loopdiv;	/* New prediv */
+	u32 pll_prediv;		/* New loopdiv */
+};
+
+struct dibx090p_adc dib8090p_adc_tab[] = {
+	{ 50000, 17043521, 16, 3}, /* 64 MHz */
+	{878000, 20199729, 9, 1}, /* 60 MHz */
+	{0xffffffff, 0, 0, 0}, /* 60 MHz */
+};
+
+static int dib8096p_agc_startup(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dibx000_bandwidth_config pll;
+	u16 target;
+	int better_sampling_freq = 0, ret;
+	struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0];
+
+	ret = state->set_param_save(fe, fep);
+	if (ret < 0)
+		return ret;
+	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+
+	dib0090_pwm_gain_reset(fe);
+	/* dib0090_get_wbd_target is returning any possible
+	   temperature compensated wbd-target */
+	target = (dib0090_get_wbd_target(fe) * 8  + 1) / 2;
+	dib8000_set_wbd_ref(fe, target);
+
+
+	while (fep->frequency / 1000 > adc_table->freq) {
+		better_sampling_freq = 1;
+		adc_table++;
+	}
+
+	if ((adc_table->freq != 0xffffffff) && better_sampling_freq) {
+		pll.pll_ratio  = adc_table->pll_loopdiv;
+		pll.pll_prediv = adc_table->pll_prediv;
+		dib8000_update_pll(fe, &pll);
+		dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf);
+	}
+	return 0;
+}
+
+static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach,
+			&adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe8096p_dib0090_config) == NULL)
+		return -ENODEV;
+
+	dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
+	return 0;
+}
+
 /* STK9090M */
 static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
 {
@@ -3234,6 +3489,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090E) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7790E) },
+/* 80 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE8096P) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -4369,6 +4625,47 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.num_frontends = 1,
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk80xx_pid_filter,
+					.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+					.frontend_attach  = tfe8096p_frontend_attach,
+					.tuner_attach     = tfe8096p_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				} },
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE8096P reference design",
+				{ &dib0700_usb_id_table[80], NULL },
+				{ NULL },
+			},
+		},
+
 		.rc.core = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,

drivers/media/dvb/dvb-usb/dvb-usb-ids.h

@@ -109,6 +109,7 @@
 #define USB_PID_DIBCOM_STK807XPVR			0x1f98
 #define USB_PID_DIBCOM_STK8096GP                        0x1fa0
 #define USB_PID_DIBCOM_NIM8096MD                        0x1fa8
+#define USB_PID_DIBCOM_TFE8096P				0x1f9C
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
 #define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DIBCOM_NIM7090				0x1bb2