提交 88981596 编写于 作者: L Linus Torvalds

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on
   Kaffeine (Fedora 16 Bugzilla #812895);
 - Fixes a mutex unlock at an error condition at drx-k;
 - Fix winbond-cir set mode;
 - mt9m032: Fix a compilation breakage with some random Kconfig;
 - mt9m032: fix two dead locks;
 - xc5000: don't require an special firmware (that won't be provided by
   the vendor) just because the xtal frequency is different;
 - V4L DocBook: fix some typos at multi-plane formats description.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
  [media] V4L: mt9m032: fix compilation breakage
  [media] V4L: DocBook: Fix typos in the multi-plane formats description
  [media] V4L: mt9m032: fix two dead-locks
  [media] rc-core: set mode for winbond-cir
  [media] drxk: Does not unlock mutex if sanity check failed in scu_command()
  [media] dvb_frontend: Fix a regression when switching back to DVB-S
<refentry id="V4L2-PIX-FMT-NV12M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
......
<refentry id="V4L2-PIX-FMT-YUV420M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
......
......@@ -54,6 +54,7 @@ struct xc5000_priv {
struct list_head hybrid_tuner_instance_list;
u32 if_khz;
u32 xtal_khz;
u32 freq_hz;
u32 bandwidth;
u8 video_standard;
......@@ -214,9 +215,9 @@ static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
.size = 12401,
};
static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = {
.name = "dvb-fe-xc5000c-41.024.5-31875.fw",
.size = 16503,
static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
.name = "dvb-fe-xc5000c-41.024.5.fw",
.size = 16497,
};
static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
......@@ -226,7 +227,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
case XC5000A:
return &xc5000a_1_6_114;
case XC5000C:
return &xc5000c_41_024_5_31875;
return &xc5000c_41_024_5;
}
}
......@@ -572,6 +573,31 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
return found;
}
static int xc_set_xtal(struct dvb_frontend *fe)
{
struct xc5000_priv *priv = fe->tuner_priv;
int ret = XC_RESULT_SUCCESS;
switch (priv->chip_id) {
default:
case XC5000A:
/* 32.000 MHz xtal is default */
break;
case XC5000C:
switch (priv->xtal_khz) {
default:
case 32000:
/* 32.000 MHz xtal is default */
break;
case 31875:
/* 31.875 MHz xtal configuration */
ret = xc_write_reg(priv, 0x000f, 0x8081);
break;
}
break;
}
return ret;
}
static int xc5000_fwupload(struct dvb_frontend *fe)
{
......@@ -603,6 +629,8 @@ static int xc5000_fwupload(struct dvb_frontend *fe)
} else {
printk(KERN_INFO "xc5000: firmware uploading...\n");
ret = xc_load_i2c_sequence(fe, fw->data);
if (XC_RESULT_SUCCESS == ret)
ret = xc_set_xtal(fe);
printk(KERN_INFO "xc5000: firmware upload complete...\n");
}
......@@ -1164,6 +1192,9 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
priv->if_khz = cfg->if_khz;
}
if (priv->xtal_khz == 0)
priv->xtal_khz = cfg->xtal_khz;
if (priv->radio_input == 0)
priv->radio_input = cfg->radio_input;
......
......@@ -34,6 +34,7 @@ struct xc5000_config {
u8 i2c_address;
u32 if_khz;
u8 radio_input;
u32 xtal_khz;
int chip_id;
};
......
......@@ -1446,6 +1446,28 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system)
__func__);
return -EINVAL;
}
/*
* Get a delivery system that is compatible with DVBv3
* NOTE: in order for this to work with softwares like Kaffeine that
* uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to
* DVB-S, drivers that support both should put the SYS_DVBS entry
* before the SYS_DVBS2, otherwise it won't switch back to DVB-S.
* The real fix is that userspace applications should not use DVBv3
* and not trust on calling FE_SET_FRONTEND to switch the delivery
* system.
*/
ncaps = 0;
while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
if (fe->ops.delsys[ncaps] == desired_system) {
delsys = desired_system;
break;
}
ncaps++;
}
if (delsys == SYS_UNDEFINED) {
dprintk("%s() Couldn't find a delivery system that matches %d\n",
__func__, desired_system);
}
} else {
/*
* This is a DVBv5 call. So, it likely knows the supported
......@@ -1494,9 +1516,10 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system)
__func__);
return -EINVAL;
}
c->delivery_system = delsys;
}
c->delivery_system = delsys;
/*
* The DVBv3 or DVBv5 call is requesting a different system. So,
* emulation is needed.
......
......@@ -1520,8 +1520,10 @@ static int scu_command(struct drxk_state *state,
dprintk(1, "\n");
if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
((resultLen > 0) && (result == NULL)))
goto error;
((resultLen > 0) && (result == NULL))) {
printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
return status;
}
mutex_lock(&state->mutex);
......
......@@ -1046,6 +1046,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
goto exit_unregister_led;
}
data->dev->driver_type = RC_DRIVER_IR_RAW;
data->dev->driver_name = WBCIR_NAME;
data->dev->input_name = WBCIR_NAME;
data->dev->input_phys = "wbcir/cir0";
......
......@@ -492,7 +492,7 @@ config VIDEO_VS6624
config VIDEO_MT9M032
tristate "MT9M032 camera sensor support"
depends on I2C && VIDEO_V4L2
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select VIDEO_APTINA_PLL
---help---
This driver supports MT9M032 camera sensors from Aptina, monochrome
......
......@@ -392,10 +392,11 @@ static int mt9m032_set_pad_format(struct v4l2_subdev *subdev,
}
/* Scaling is not supported, the format is thus fixed. */
ret = mt9m032_get_pad_format(subdev, fh, fmt);
fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which);
ret = 0;
done:
mutex_lock(&sensor->lock);
mutex_unlock(&sensor->lock);
return ret;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册