Merge tag 'imx-fixes-5.11' of...

Merge tag 'imx-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.11:

- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
  #pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
  index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure
  with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.

* tag 'imx-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
  ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
  ARM: imx: fix imx8m dependencies
  ARM: dts: tbs2910: rename MMC node aliases
  arm64: dts: ls1028a: fix the offset of the reset register
  arm64: dts: imx8mn: Fix duplicate node name
  ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight

Link: https://lore.kernel.org/r/20210112131224.GI28365@dragonSigned-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx6q-tbs2910.dts

@@ -16,6 +16,13 @@
 		stdout-path = &uart1;
 	};
 
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		/delete-property/ mmc3;
+	};
+
 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x80000000>;

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

@@ -418,7 +418,7 @@
 
 			/* VDD_AUD_1P8: Audio codec */
 			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8a";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;

arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi

@@ -137,7 +137,7 @@
 
 	lcd_backlight: lcd-backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		pwm-names = "LCD_BKLT_PWM";
 
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -167,7 +167,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 
 	i2c_cam: i2c-gpio-cam {
@@ -179,7 +179,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 };
 

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -101,7 +101,7 @@
 	reboot {
 		compatible ="syscon-reboot";
 		regmap = <&rst>;
-		offset = <0xb0>;
+		offset = <0>;
 		mask = <0x02>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -253,7 +253,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			spba: bus@30000000 {
+			spba: spba-bus@30000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;

drivers/soc/imx/Kconfig

@@ -13,7 +13,7 @@ config SOC_IMX8M
 	depends on ARCH_MXC || COMPILE_TEST
 	default ARCH_MXC && ARM64
 	select SOC_BUS
-	select ARM_GIC_V3 if ARCH_MXC
+	select ARM_GIC_V3 if ARCH_MXC && ARCH_MULTI_V7
 	help
 	  If you say yes here you get support for the NXP i.MX8M family
 	  support, it will provide the SoC info like SoC family,