gianfar: cleanup gianfar.h

Remove now unused macro and structure definitions from gianfar.h that have
accumulated there over time.
Signed-off-by: NArseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/gianfar.h

@@ -67,8 +67,6 @@ struct ethtool_rx_list {
 /* Number of bytes to align the rx bufs to */
 #define RXBUF_ALIGNMENT 64
 
-#define PHY_INIT_TIMEOUT 100000
-
 #define DRV_NAME "gfar-enet"
 extern const char gfar_driver_version[];
 
@@ -88,10 +86,6 @@ extern const char gfar_driver_version[];
 #define GFAR_RX_MAX_RING_SIZE   256
 #define GFAR_TX_MAX_RING_SIZE   256
 
-#define GFAR_MAX_FIFO_THRESHOLD 511
-#define GFAR_MAX_FIFO_STARVE	511
-#define GFAR_MAX_FIFO_STARVE_OFF 511
-
 #define FBTHR_SHIFT        24
 #define DEFAULT_RX_LFC_THR  16
 #define DEFAULT_LFC_PTVVAL  4
@@ -109,9 +103,6 @@ extern const char gfar_driver_version[];
 #define DEFAULT_FIFO_TX_THR 0x100
 #define DEFAULT_FIFO_TX_STARVE 0x40
 #define DEFAULT_FIFO_TX_STARVE_OFF 0x80
-#define DEFAULT_BD_STASH 1
-#define DEFAULT_STASH_LENGTH	96
-#define DEFAULT_STASH_INDEX	0
 
 /* The number of Exact Match registers */
 #define GFAR_EM_NUM	15
@@ -139,15 +130,6 @@ extern const char gfar_driver_version[];
 #define DEFAULT_RX_COALESCE 0
 #define DEFAULT_RXCOUNT	0
 
-#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
-		| SUPPORTED_10baseT_Full \
-		| SUPPORTED_100baseT_Half \
-		| SUPPORTED_100baseT_Full \
-		| SUPPORTED_Autoneg \
-		| SUPPORTED_MII)
-
-#define GFAR_SUPPORTED_GBIT SUPPORTED_1000baseT_Full
-
 /* TBI register addresses */
 #define MII_TBICON		0x11
 
@@ -185,8 +167,6 @@ extern const char gfar_driver_version[];
 #define ECNTRL_REDUCED_MII_MODE	0x00000004
 #define ECNTRL_SGMII_MODE	0x00000002
 
-#define MRBLR_INIT_SETTINGS	DEFAULT_RX_BUFFER_SIZE
-
 #define MINFLR_INIT_SETTINGS	0x00000040
 
 /* Tqueue control */
@@ -266,12 +246,6 @@ extern const char gfar_driver_version[];
 #define DEFAULT_TXIC mk_ic_value(DEFAULT_TXCOUNT, DEFAULT_TXTIME)
 #define DEFAULT_RXIC mk_ic_value(DEFAULT_RXCOUNT, DEFAULT_RXTIME)
 
-#define skip_bd(bdp, stride, base, ring_size) ({ \
-	typeof(bdp) new_bd = (bdp) + (stride); \
-	(new_bd >= (base) + (ring_size)) ? (new_bd - (ring_size)) : new_bd; })
-
-#define next_bd(bdp, base, ring_size) skip_bd(bdp, 1, base, ring_size)
-
 #define RCTRL_TS_ENABLE 	0x01000000
 #define RCTRL_PAL_MASK		0x001f0000
 #define RCTRL_LFC		0x00004000
@@ -385,11 +359,6 @@ extern const char gfar_driver_version[];
 #define IMASK_RX_DISABLED ((~(IMASK_RX_DEFAULT)) & IMASK_DEFAULT)
 #define IMASK_TX_DISABLED ((~(IMASK_TX_DEFAULT)) & IMASK_DEFAULT)
 
-/* Fifo management */
-#define FIFO_TX_THR_MASK	0x01ff
-#define FIFO_TX_STARVE_MASK	0x01ff
-#define FIFO_TX_STARVE_OFF_MASK	0x01ff
-
 /* Attribute fields */
 
 /* This enables rx snooping for buffers and descriptors */
@@ -1341,13 +1310,6 @@ extern const struct ethtool_ops gfar_ethtool_ops;
 #define RQFCR_PID_PORT_MASK 0xFFFF0000
 #define RQFCR_PID_MAC_MASK 0xFF000000
 
-struct gfar_mask_entry {
-	unsigned int mask; /* The mask value which is valid form start to end */
-	unsigned int start;
-	unsigned int end;
-	unsigned int block; /* Same block values indicate depended entries */
-};
-
 /* Represents a receive filer table entry */
 struct gfar_filer_entry {
 	u32 ctrl;