提交 8838becd 编写于 作者: G Gabor Juhos 提交者: John Crispin

MIPS: ath79: fix GPIO function selection for AR934x SoCs

GPIO function selection is not working on the AR934x
SoCs because the offset of the function selection
register is different on those.

Add a helper routine which returns the correct
register address based on the SoC type, and use
that in the 'ath79_gpio_function_*' routines.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4870/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
上级 778eeb1b
...@@ -137,47 +137,61 @@ static struct gpio_chip ath79_gpio_chip = { ...@@ -137,47 +137,61 @@ static struct gpio_chip ath79_gpio_chip = {
.base = 0, .base = 0,
}; };
static void __iomem *ath79_gpio_get_function_reg(void)
{
u32 reg = 0;
if (soc_is_ar71xx() ||
soc_is_ar724x() ||
soc_is_ar913x() ||
soc_is_ar933x())
reg = AR71XX_GPIO_REG_FUNC;
else if (soc_is_ar934x())
reg = AR934X_GPIO_REG_FUNC;
else
BUG();
return ath79_gpio_base + reg;
}
void ath79_gpio_function_enable(u32 mask) void ath79_gpio_function_enable(u32 mask)
{ {
void __iomem *base = ath79_gpio_base; void __iomem *reg = ath79_gpio_get_function_reg();
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags); spin_lock_irqsave(&ath79_gpio_lock, flags);
__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) | mask, __raw_writel(__raw_readl(reg) | mask, reg);
base + AR71XX_GPIO_REG_FUNC);
/* flush write */ /* flush write */
__raw_readl(base + AR71XX_GPIO_REG_FUNC); __raw_readl(reg);
spin_unlock_irqrestore(&ath79_gpio_lock, flags); spin_unlock_irqrestore(&ath79_gpio_lock, flags);
} }
void ath79_gpio_function_disable(u32 mask) void ath79_gpio_function_disable(u32 mask)
{ {
void __iomem *base = ath79_gpio_base; void __iomem *reg = ath79_gpio_get_function_reg();
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags); spin_lock_irqsave(&ath79_gpio_lock, flags);
__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~mask, __raw_writel(__raw_readl(reg) & ~mask, reg);
base + AR71XX_GPIO_REG_FUNC);
/* flush write */ /* flush write */
__raw_readl(base + AR71XX_GPIO_REG_FUNC); __raw_readl(reg);
spin_unlock_irqrestore(&ath79_gpio_lock, flags); spin_unlock_irqrestore(&ath79_gpio_lock, flags);
} }
void ath79_gpio_function_setup(u32 set, u32 clear) void ath79_gpio_function_setup(u32 set, u32 clear)
{ {
void __iomem *base = ath79_gpio_base; void __iomem *reg = ath79_gpio_get_function_reg();
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags); spin_lock_irqsave(&ath79_gpio_lock, flags);
__raw_writel((__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~clear) | set, __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
base + AR71XX_GPIO_REG_FUNC);
/* flush write */ /* flush write */
__raw_readl(base + AR71XX_GPIO_REG_FUNC); __raw_readl(reg);
spin_unlock_irqrestore(&ath79_gpio_lock, flags); spin_unlock_irqrestore(&ath79_gpio_lock, flags);
} }
......
...@@ -401,6 +401,8 @@ ...@@ -401,6 +401,8 @@
#define AR71XX_GPIO_REG_INT_ENABLE 0x24 #define AR71XX_GPIO_REG_INT_ENABLE 0x24
#define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_REG_FUNC 0x28
#define AR934X_GPIO_REG_FUNC 0x6c
#define AR71XX_GPIO_COUNT 16 #define AR71XX_GPIO_COUNT 16
#define AR7240_GPIO_COUNT 18 #define AR7240_GPIO_COUNT 18
#define AR7241_GPIO_COUNT 20 #define AR7241_GPIO_COUNT 20
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册