提交 8829d55e 编写于 作者: M Michael Buesch 提交者: John W. Linville

[PATCH] bcm43xx: fix pctl slowclock limit calculation

This fixes coverity bug:
http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 2230daa0
......@@ -35,77 +35,101 @@
#include "bcm43xx_main.h"
/* Get the Slow Clock Source */
static int bcm43xx_pctl_get_slowclksrc(struct bcm43xx_private *bcm)
{
u32 tmp;
int err;
assert(bcm->current_core == &bcm->core_chipcommon);
if (bcm->current_core->rev < 6) {
if (bcm->bustype == BCM43xx_BUSTYPE_PCMCIA ||
bcm->bustype == BCM43xx_BUSTYPE_SB)
return BCM43xx_PCTL_CLKSRC_XTALOS;
if (bcm->bustype == BCM43xx_BUSTYPE_PCI) {
err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
assert(!err);
if (tmp & 0x10)
return BCM43xx_PCTL_CLKSRC_PCI;
return BCM43xx_PCTL_CLKSRC_XTALOS;
}
}
if (bcm->current_core->rev < 10) {
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
tmp &= 0x7;
if (tmp == 0)
return BCM43xx_PCTL_CLKSRC_LOPWROS;
if (tmp == 1)
return BCM43xx_PCTL_CLKSRC_XTALOS;
if (tmp == 2)
return BCM43xx_PCTL_CLKSRC_PCI;
}
return BCM43xx_PCTL_CLKSRC_XTALOS;
}
/* Get max/min slowclock frequency
* as described in http://bcm-specs.sipsolutions.net/PowerControl
*/
static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
int get_max)
{
int limit = 0;
int limit;
int clocksrc;
int divisor;
int selection;
int err;
u32 tmp;
struct bcm43xx_coreinfo *old_core;
if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
goto out;
old_core = bcm->current_core;
err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
if (err)
goto out;
assert(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL);
assert(bcm->current_core == &bcm->core_chipcommon);
clocksrc = bcm43xx_pctl_get_slowclksrc(bcm);
if (bcm->current_core->rev < 6) {
if ((bcm->bustype == BCM43xx_BUSTYPE_PCMCIA) ||
(bcm->bustype == BCM43xx_BUSTYPE_SB)) {
selection = 1;
switch (clocksrc) {
case BCM43xx_PCTL_CLKSRC_PCI:
divisor = 64;
break;
case BCM43xx_PCTL_CLKSRC_XTALOS:
divisor = 32;
} else {
err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
if (err) {
printk(KERN_ERR PFX "clockfreqlimit pcicfg read failure\n");
goto out_switchback;
}
if (tmp & 0x10) {
/* PCI */
selection = 2;
divisor = 64;
} else {
/* XTAL */
selection = 1;
divisor = 32;
}
break;
default:
assert(0);
divisor = 1;
}
} else if (bcm->current_core->rev < 10) {
selection = (tmp & 0x07);
if (selection) {
switch (clocksrc) {
case BCM43xx_PCTL_CLKSRC_LOPWROS:
divisor = 1;
break;
case BCM43xx_PCTL_CLKSRC_XTALOS:
case BCM43xx_PCTL_CLKSRC_PCI:
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
} else
divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
divisor *= 4;
break;
default:
assert(0);
divisor = 1;
}
} else {
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL);
divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
selection = 1;
divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
divisor *= 4;
}
switch (selection) {
case 0:
/* LPO */
switch (clocksrc) {
case BCM43xx_PCTL_CLKSRC_LOPWROS:
if (get_max)
limit = 43000;
else
limit = 25000;
break;
case 1:
/* XTAL */
case BCM43xx_PCTL_CLKSRC_XTALOS:
if (get_max)
limit = 20200000;
else
limit = 19800000;
break;
case 2:
/* PCI */
case BCM43xx_PCTL_CLKSRC_PCI:
if (get_max)
limit = 34000000;
else
......@@ -113,17 +137,14 @@ static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
break;
default:
assert(0);
limit = 0;
}
limit /= divisor;
out_switchback:
err = bcm43xx_switch_core(bcm, old_core);
assert(err == 0);
out:
return limit;
}
/* init power control
* as described in http://bcm-specs.sipsolutions.net/PowerControl
*/
......
......@@ -33,6 +33,15 @@
#include <linux/types.h>
/* Clock sources */
enum {
/* PCI clock */
BCM43xx_PCTL_CLKSRC_PCI,
/* Crystal slow clock oscillator */
BCM43xx_PCTL_CLKSRC_XTALOS,
/* Low power oscillator */
BCM43xx_PCTL_CLKSRC_LOPWROS,
};
struct bcm43xx_private;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册