提交 87ee07f8 编写于 作者: P Petr Machata 提交者: David S. Miller

mlxsw: spectrum: PTP: Support ethtool get_ts_info

The get_ts_info callback is used for obtaining information about
timestamping capabilities of a network device. On Spectrum-1, implement
it to advertise the PHC and the capability to do HW timestamping, and
the supported RX and TX filters.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 87486427
......@@ -171,6 +171,8 @@ struct mlxsw_sp_ptp_ops {
struct hwtstamp_config *config);
int (*hwtstamp_set)(struct mlxsw_sp_port *mlxsw_sp_port,
struct hwtstamp_config *config);
int (*get_ts_info)(struct mlxsw_sp *mlxsw_sp,
struct ethtool_ts_info *info);
};
static int mlxsw_sp_component_query(struct mlxfw_dev *mlxfw_dev,
......@@ -3316,6 +3318,15 @@ static int mlxsw_sp_get_module_eeprom(struct net_device *netdev,
return err;
}
static int
mlxsw_sp_get_ts_info(struct net_device *netdev, struct ethtool_ts_info *info)
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(netdev);
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
return mlxsw_sp->ptp_ops->get_ts_info(mlxsw_sp, info);
}
static const struct ethtool_ops mlxsw_sp_port_ethtool_ops = {
.get_drvinfo = mlxsw_sp_port_get_drvinfo,
.get_link = ethtool_op_get_link,
......@@ -3329,6 +3340,7 @@ static const struct ethtool_ops mlxsw_sp_port_ethtool_ops = {
.set_link_ksettings = mlxsw_sp_port_set_link_ksettings,
.get_module_info = mlxsw_sp_get_module_info,
.get_module_eeprom = mlxsw_sp_get_module_eeprom,
.get_ts_info = mlxsw_sp_get_ts_info,
};
static int
......@@ -4547,6 +4559,7 @@ static const struct mlxsw_sp_ptp_ops mlxsw_sp1_ptp_ops = {
.transmitted = mlxsw_sp1_ptp_transmitted,
.hwtstamp_get = mlxsw_sp1_ptp_hwtstamp_get,
.hwtstamp_set = mlxsw_sp1_ptp_hwtstamp_set,
.get_ts_info = mlxsw_sp1_ptp_get_ts_info,
};
static const struct mlxsw_sp_ptp_ops mlxsw_sp2_ptp_ops = {
......@@ -4558,6 +4571,7 @@ static const struct mlxsw_sp_ptp_ops mlxsw_sp2_ptp_ops = {
.transmitted = mlxsw_sp2_ptp_transmitted,
.hwtstamp_get = mlxsw_sp2_ptp_hwtstamp_get,
.hwtstamp_set = mlxsw_sp2_ptp_hwtstamp_set,
.get_ts_info = mlxsw_sp2_ptp_get_ts_info,
};
static int mlxsw_sp_netdevice_event(struct notifier_block *unused,
......
......@@ -933,3 +933,21 @@ int mlxsw_sp1_ptp_hwtstamp_set(struct mlxsw_sp_port *mlxsw_sp_port,
return 0;
}
int mlxsw_sp1_ptp_get_ts_info(struct mlxsw_sp *mlxsw_sp,
struct ethtool_ts_info *info)
{
info->phc_index = ptp_clock_index(mlxsw_sp->clock->ptp);
info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
info->tx_types = BIT(HWTSTAMP_TX_OFF) |
BIT(HWTSTAMP_TX_ON);
info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
BIT(HWTSTAMP_FILTER_ALL);
return 0;
}
......@@ -18,6 +18,14 @@ enum {
MLXSW_SP_PTP_MESSAGE_TYPE_PDELAY_RESP,
};
static inline int mlxsw_sp_ptp_get_ts_info_noptp(struct ethtool_ts_info *info)
{
info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
SOF_TIMESTAMPING_SOFTWARE;
info->phc_index = -1;
return 0;
}
#if IS_REACHABLE(CONFIG_PTP_1588_CLOCK)
struct mlxsw_sp_ptp_clock *
......@@ -46,6 +54,9 @@ int mlxsw_sp1_ptp_hwtstamp_get(struct mlxsw_sp_port *mlxsw_sp_port,
int mlxsw_sp1_ptp_hwtstamp_set(struct mlxsw_sp_port *mlxsw_sp_port,
struct hwtstamp_config *config);
int mlxsw_sp1_ptp_get_ts_info(struct mlxsw_sp *mlxsw_sp,
struct ethtool_ts_info *info);
#else
static inline struct mlxsw_sp_ptp_clock *
......@@ -102,6 +113,12 @@ mlxsw_sp1_ptp_hwtstamp_set(struct mlxsw_sp_port *mlxsw_sp_port,
return -EOPNOTSUPP;
}
static inline int mlxsw_sp1_ptp_get_ts_info(struct mlxsw_sp *mlxsw_sp,
struct ethtool_ts_info *info)
{
return mlxsw_sp_ptp_get_ts_info_noptp(info);
}
#endif
static inline struct mlxsw_sp_ptp_clock *
......@@ -150,4 +167,10 @@ mlxsw_sp2_ptp_hwtstamp_set(struct mlxsw_sp_port *mlxsw_sp_port,
return -EOPNOTSUPP;
}
static inline int mlxsw_sp2_ptp_get_ts_info(struct mlxsw_sp *mlxsw_sp,
struct ethtool_ts_info *info)
{
return mlxsw_sp_ptp_get_ts_info_noptp(info);
}
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册