[POWERPC] Fix FSL BookE machine check reporting

Reserved MCSR bits on FSL BookE parts may have spurious values
when mcheck occurs.  Mask these off when printing the MCSR to
avoid confusion.  Also, get rid of the MCSR_GL_CI bit defined
for e500 - this bit doesn't actually have any meaning.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/kernel/traps.c

@@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs)
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs)
 		printk("Data Cache Push Parity Error\n");
 	if (reason & MCSR_DCPERR)
 		printk("Data Cache Parity Error\n");
-	if (reason & MCSR_GL_CI)
-		printk("Guarded Load or Cache-Inhibited stwcx.\n");
 	if (reason & MCSR_BUS_IAERR)
 		printk("Bus - Instruction Address Error\n");
 	if (reason & MCSR_BUS_RAERR)

include/asm-powerpc/reg_booke.h

@@ -223,7 +223,6 @@
 #define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
 #define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
 #define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
-#define MCSR_GL_CI 	0x00010000UL /* Guarded Load or Cache-Inhibited stwcx. */
 #define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
 #define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
 #define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
@@ -232,6 +231,12 @@
 #define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
 #define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
 #define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
+
+/* e500 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
+			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
+			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
+			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
 #endif
 #ifdef CONFIG_E200
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
@@ -243,6 +248,11 @@
 #define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
 #define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
 					store or cache line push */
+
+/* e200 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
+			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
+			MCSR_BUS_WRERR)
 #endif
 
 /* Bit definitions for the DBSR. */