[PATCH] USB ATM: bits and bobs

Makefile and Kconfig entries for the new drivers.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/atm/Kconfig

 #
-# USB ATM driver configuration
+# USB/ATM DSL configuration
 #
-comment "USB ATM/DSL drivers"
+
+menu "USB DSL modem support"
 	depends on USB
 
 config USB_ATM
-	tristate "Generic USB ATM/DSL core I/O support"
+	tristate "USB DSL modem support"
 	depends on USB && ATM
 	select CRC32
 	default n
 	help
-	  This provides a library which is used for packet I/O by USB DSL
-	  modems, such as the SpeedTouch driver below. 
+	  Say Y here if you want to connect a USB Digital Subscriber Line (DSL)
+	  modem to your computer's USB port.  You will then need to choose your
+	  modem from the list below.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called usb_atm.
+	  module will be called usbatm.
 
 config USB_SPEEDTOUCH
-	tristate "Alcatel Speedtouch USB support"
-	depends on USB && ATM
-	select USB_ATM
+	tristate "Speedtouch USB support"
+	depends on USB_ATM
+	select FW_LOADER
 	help
-	  Say Y here if you have an Alcatel SpeedTouch USB or SpeedTouch 330
+	  Say Y here if you have an SpeedTouch USB or SpeedTouch 330
 	  modem.  In order to use your modem you will need to install the 
 	  two parts of the firmware, extracted by the user space tools; see
 	  <http://www.linux-usb.org/SpeedTouch/> for details.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called speedtch.
+
+config USB_CXACRU
+	tristate "Conexant AccessRunner USB support"
+	depends on USB_ATM
+	select FW_LOADER
+	help
+	  Say Y here if you have an ADSL USB modem based on the Conexant
+	  AccessRunner chipset.  In order to use your modem you will need to
+	  install the firmware, extracted by the user space tools; see
+	  <http://accessrunner.sourceforge.net/> for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cxacru.
+
+config USB_XUSBATM
+	tristate "Other USB DSL modem support"
+	depends on USB_ATM
+	help
+	  Say Y here if you have a DSL USB modem not explicitly supported by
+	  another USB DSL drivers.  In order to use your modem you will need to
+	  pass the vendor ID, product ID, and endpoint numbers for transmission
+	  and reception as module parameters.  You may need to initialize the
+	  the modem using a user space utility (a firmware loader for example).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xusbatm.
+
+endmenu

drivers/usb/atm/Makefile

 #
-# Makefile for the rest of the USB drivers
-# (the ones that don't fit into any other categories)
+# Makefile for USB ATM/xDSL drivers
 #
 
-obj-$(CONFIG_USB_ATM)		+= usb_atm.o
+obj-$(CONFIG_USB_CXACRU)	+= cxacru.o
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= speedtch.o
+obj-$(CONFIG_USB_ATM)		+= usbatm.o
+obj-$(CONFIG_USB_XUSBATM)	+= xusbatm.o