ath9k: Add support for OCB mode

The patch adds support for "outside the context of a BSS"(OCB) mode
to ath9k driver and extends debugfs files by OCB ralated information.

This patch was tested on AR9380-AL1A cards.
Signed-off-by: NJan Kaisrlik <kaisrja1@fel.cvut.cz>
Cc: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -635,6 +635,7 @@ struct ath9k_vif_iter_data {
 	int nstations; /* number of station vifs */
 	int nwds;      /* number of WDS vifs */
 	int nadhocs;   /* number of adhoc vifs */
+	int nocbs;     /* number of OCB vifs */
 	struct ieee80211_vif *primary_sta;
 };
 

drivers/net/wireless/ath/ath9k/debug.c

@@ -741,8 +741,8 @@ static int read_file_misc(struct seq_file *file, void *data)
 			   i++, (int)(ctx->assigned), iter_data.naps,
 			   iter_data.nstations,
 			   iter_data.nmeshes, iter_data.nwds);
-		seq_printf(file, " ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n",
-			   iter_data.nadhocs, sc->cur_chan->nvifs,
+		seq_printf(file, " ADHOC: %i OCB: %i TOTAL: %hi BEACON-VIF: %hi\n",
+			   iter_data.nadhocs, iter_data.nocbs, sc->cur_chan->nvifs,
 			   sc->nbcnvifs);
 	}
 

drivers/net/wireless/ath/ath9k/htc_drv_init.c

@@ -740,7 +740,8 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_P2P_GO) |
 		BIT(NL80211_IFTYPE_P2P_CLIENT) |
-		BIT(NL80211_IFTYPE_MESH_POINT);
+		BIT(NL80211_IFTYPE_MESH_POINT) |
+		BIT(NL80211_IFTYPE_OCB);
 
 	hw->wiphy->iface_combinations = &if_comb;
 	hw->wiphy->n_iface_combinations = 1;

drivers/net/wireless/ath/ath9k/hw.c

@@ -1241,6 +1241,7 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode)
 			break;
 		}
 		/* fall through */
+	case NL80211_IFTYPE_OCB:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_AP:
 		set |= AR_STA_ID1_STA_AP;

drivers/net/wireless/ath/ath9k/init.c

@@ -855,7 +855,8 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 			BIT(NL80211_IFTYPE_STATION) |
 			BIT(NL80211_IFTYPE_ADHOC) |
 			BIT(NL80211_IFTYPE_MESH_POINT) |
-			BIT(NL80211_IFTYPE_WDS);
+			BIT(NL80211_IFTYPE_WDS) |
+			BIT(NL80211_IFTYPE_OCB);
 
 		if (ath9k_is_chanctx_enabled())
 			hw->wiphy->interface_modes |=

drivers/net/wireless/ath/ath9k/main.c

@@ -938,6 +938,9 @@ static void ath9k_vif_iter(struct ath9k_vif_iter_data *iter_data,
 		if (avp->assoc && !iter_data->primary_sta)
 			iter_data->primary_sta = vif;
 		break;
+	case NL80211_IFTYPE_OCB:
+		iter_data->nocbs++;
+		break;
 	case NL80211_IFTYPE_ADHOC:
 		iter_data->nadhocs++;
 		if (vif->bss_conf.enable_beacon)
@@ -1111,6 +1114,8 @@ void ath9k_calculate_summary_state(struct ath_softc *sc,
 
 		if (iter_data.nmeshes)
 			ah->opmode = NL80211_IFTYPE_MESH_POINT;
+		else if (iter_data.nocbs)
+			ah->opmode = NL80211_IFTYPE_OCB;
 		else if (iter_data.nwds)
 			ah->opmode = NL80211_IFTYPE_AP;
 		else if (iter_data.nadhocs)
@@ -1760,7 +1765,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 		ath9k_calculate_summary_state(sc, avp->chanctx);
 	}
 
-	if (changed & BSS_CHANGED_IBSS) {
+	if ((changed & BSS_CHANGED_IBSS) ||
+	      (changed & BSS_CHANGED_OCB)) {
 		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 		common->curaid = bss_conf->aid;
 		ath9k_hw_write_associd(sc->sc_ah);

drivers/net/wireless/ath/ath9k/recv.c

@@ -403,7 +403,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
 	    (sc->cur_chan->nvifs <= 1) &&
 	    !(sc->cur_chan->rxfilter & FIF_BCN_PRBRESP_PROMISC))
 		rfilt |= ATH9K_RX_FILTER_MYBEACON;
-	else
+	else if (sc->sc_ah->opmode != NL80211_IFTYPE_OCB)
 		rfilt |= ATH9K_RX_FILTER_BEACON;
 
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||