提交 8626816e 编写于 作者: J Jia Hongtao 提交者: Kumar Gala

powerpc: add support for MPIC message register API

Some MPIC implementations contain one or more blocks of message registers
that are used to send messages between cores via IPIs.  A simple API has
been added to access (get/put, read, write, etc ...) these message registers.
The available message registers are initially discovered via nodes in the
device tree.  A separate commit contains a binding for the message register
nodes.
Signed-off-by: NMeador Inge <meador_inge@mentor.com>
Signed-off-by: NJia Hongtao <B38951@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 da3b6c05
/*
* Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2 of the
* License.
*
*/
#ifndef _ASM_MPIC_MSGR_H
#define _ASM_MPIC_MSGR_H
#include <linux/types.h>
#include <linux/spinlock.h>
struct mpic_msgr {
u32 __iomem *base;
u32 __iomem *mer;
int irq;
unsigned char in_use;
raw_spinlock_t lock;
int num;
};
/* Get a message register
*
* @reg_num: the MPIC message register to get
*
* A pointer to the message register is returned. If
* the message register asked for is already in use, then
* EBUSY is returned. If the number given is not associated
* with an actual message register, then ENODEV is returned.
* Successfully getting the register marks it as in use.
*/
extern struct mpic_msgr *mpic_msgr_get(unsigned int reg_num);
/* Relinquish a message register
*
* @msgr: the message register to return
*
* Disables the given message register and marks it as free.
* After this call has completed successully the message
* register is available to be acquired by a call to
* mpic_msgr_get.
*/
extern void mpic_msgr_put(struct mpic_msgr *msgr);
/* Enable a message register
*
* @msgr: the message register to enable
*
* The given message register is enabled for sending
* messages.
*/
extern void mpic_msgr_enable(struct mpic_msgr *msgr);
/* Disable a message register
*
* @msgr: the message register to disable
*
* The given message register is disabled for sending
* messages.
*/
extern void mpic_msgr_disable(struct mpic_msgr *msgr);
/* Write a message to a message register
*
* @msgr: the message register to write to
* @message: the message to write
*
* The given 32-bit message is written to the given message
* register. Writing to an enabled message registers fires
* an interrupt.
*/
static inline void mpic_msgr_write(struct mpic_msgr *msgr, u32 message)
{
out_be32(msgr->base, message);
}
/* Read a message from a message register
*
* @msgr: the message register to read from
*
* Returns the 32-bit value currently in the given message register.
* Upon reading the register any interrupts for that register are
* cleared.
*/
static inline u32 mpic_msgr_read(struct mpic_msgr *msgr)
{
return in_be32(msgr->base);
}
/* Clear a message register
*
* @msgr: the message register to clear
*
* Clears any interrupts associated with the given message register.
*/
static inline void mpic_msgr_clear(struct mpic_msgr *msgr)
{
(void) mpic_msgr_read(msgr);
}
/* Set the destination CPU for the message register
*
* @msgr: the message register whose destination is to be set
* @cpu_num: the Linux CPU number to bind the message register to
*
* Note that the CPU number given is the CPU number used by the kernel
* and *not* the actual hardware CPU number.
*/
static inline void mpic_msgr_set_destination(struct mpic_msgr *msgr,
u32 cpu_num)
{
out_be32(msgr->base, 1 << get_hard_smp_processor_id(cpu_num));
}
/* Get the IRQ number for the message register
* @msgr: the message register whose IRQ is to be returned
*
* Returns the IRQ number associated with the given message register.
* NO_IRQ is returned if this message register is not capable of
* receiving interrupts. What message register can and cannot receive
* interrupts is specified in the device tree for the system.
*/
static inline int mpic_msgr_get_irq(struct mpic_msgr *msgr)
{
return msgr->irq;
}
#endif
......@@ -86,6 +86,14 @@ config MPIC_WEIRD
bool
default n
config MPIC_MSGR
bool "MPIC message register support"
depends on MPIC
default n
help
Enables support for the MPIC message registers. These
registers are used for inter-processor communication.
config PPC_I8259
bool
default n
......
......@@ -4,6 +4,8 @@ ccflags-$(CONFIG_PPC64) := -mno-minimal-toc
mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
mpic-msgr-obj-$(CONFIG_MPIC_MSGR) += mpic_msgr.o
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) $(mpic-msgr-obj-y)
obj-$(CONFIG_PPC_EPAPR_HV_PIC) += ehv_pic.o
fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o
obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o
......
/*
* Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
*
* Some ideas based on un-pushed work done by Vivek Mahajan, Jason Jin, and
* Mingkai Hu from Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2 of the
* License.
*
*/
#include <linux/list.h>
#include <linux/of_platform.h>
#include <linux/errno.h>
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
#include <asm/mpic_msgr.h>
#define MPIC_MSGR_REGISTERS_PER_BLOCK 4
#define MPIC_MSGR_STRIDE 0x10
#define MPIC_MSGR_MER_OFFSET 0x100
#define MSGR_INUSE 0
#define MSGR_FREE 1
static struct mpic_msgr **mpic_msgrs;
static unsigned int mpic_msgr_count;
static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value)
{
out_be32(msgr->mer, value);
}
static inline u32 _mpic_msgr_mer_read(struct mpic_msgr *msgr)
{
return in_be32(msgr->mer);
}
static inline void _mpic_msgr_disable(struct mpic_msgr *msgr)
{
u32 mer = _mpic_msgr_mer_read(msgr);
_mpic_msgr_mer_write(msgr, mer & ~(1 << msgr->num));
}
struct mpic_msgr *mpic_msgr_get(unsigned int reg_num)
{
unsigned long flags;
struct mpic_msgr *msgr;
/* Assume busy until proven otherwise. */
msgr = ERR_PTR(-EBUSY);
if (reg_num >= mpic_msgr_count)
return ERR_PTR(-ENODEV);
raw_spin_lock_irqsave(&msgr->lock, flags);
if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) {
msgr = mpic_msgrs[reg_num];
msgr->in_use = MSGR_INUSE;
}
raw_spin_unlock_irqrestore(&msgr->lock, flags);
return msgr;
}
EXPORT_SYMBOL_GPL(mpic_msgr_get);
void mpic_msgr_put(struct mpic_msgr *msgr)
{
unsigned long flags;
raw_spin_lock_irqsave(&msgr->lock, flags);
msgr->in_use = MSGR_FREE;
_mpic_msgr_disable(msgr);
raw_spin_unlock_irqrestore(&msgr->lock, flags);
}
EXPORT_SYMBOL_GPL(mpic_msgr_put);
void mpic_msgr_enable(struct mpic_msgr *msgr)
{
unsigned long flags;
u32 mer;
raw_spin_lock_irqsave(&msgr->lock, flags);
mer = _mpic_msgr_mer_read(msgr);
_mpic_msgr_mer_write(msgr, mer | (1 << msgr->num));
raw_spin_unlock_irqrestore(&msgr->lock, flags);
}
EXPORT_SYMBOL_GPL(mpic_msgr_enable);
void mpic_msgr_disable(struct mpic_msgr *msgr)
{
unsigned long flags;
raw_spin_lock_irqsave(&msgr->lock, flags);
_mpic_msgr_disable(msgr);
raw_spin_unlock_irqrestore(&msgr->lock, flags);
}
EXPORT_SYMBOL_GPL(mpic_msgr_disable);
/* The following three functions are used to compute the order and number of
* the message register blocks. They are clearly very inefficent. However,
* they are called *only* a few times during device initialization.
*/
static unsigned int mpic_msgr_number_of_blocks(void)
{
unsigned int count;
struct device_node *aliases;
count = 0;
aliases = of_find_node_by_name(NULL, "aliases");
if (aliases) {
char buf[32];
for (;;) {
snprintf(buf, sizeof(buf), "mpic-msgr-block%d", count);
if (!of_find_property(aliases, buf, NULL))
break;
count += 1;
}
}
return count;
}
static unsigned int mpic_msgr_number_of_registers(void)
{
return mpic_msgr_number_of_blocks() * MPIC_MSGR_REGISTERS_PER_BLOCK;
}
static int mpic_msgr_block_number(struct device_node *node)
{
struct device_node *aliases;
unsigned int index, number_of_blocks;
char buf[64];
number_of_blocks = mpic_msgr_number_of_blocks();
aliases = of_find_node_by_name(NULL, "aliases");
if (!aliases)
return -1;
for (index = 0; index < number_of_blocks; ++index) {
struct property *prop;
snprintf(buf, sizeof(buf), "mpic-msgr-block%d", index);
prop = of_find_property(aliases, buf, NULL);
if (node == of_find_node_by_path(prop->value))
break;
}
return index == number_of_blocks ? -1 : index;
}
/* The probe function for a single message register block.
*/
static __devinit int mpic_msgr_probe(struct platform_device *dev)
{
void __iomem *msgr_block_addr;
int block_number;
struct resource rsrc;
unsigned int i;
unsigned int irq_index;
struct device_node *np = dev->dev.of_node;
unsigned int receive_mask;
const unsigned int *prop;
if (!np) {
dev_err(&dev->dev, "Device OF-Node is NULL");
return -EFAULT;
}
/* Allocate the message register array upon the first device
* registered.
*/
if (!mpic_msgrs) {
mpic_msgr_count = mpic_msgr_number_of_registers();
dev_info(&dev->dev, "Found %d message registers\n",
mpic_msgr_count);
mpic_msgrs = kzalloc(sizeof(struct mpic_msgr) * mpic_msgr_count,
GFP_KERNEL);
if (!mpic_msgrs) {
dev_err(&dev->dev,
"No memory for message register blocks\n");
return -ENOMEM;
}
}
dev_info(&dev->dev, "Of-device full name %s\n", np->full_name);
/* IO map the message register block. */
of_address_to_resource(np, 0, &rsrc);
msgr_block_addr = ioremap(rsrc.start, rsrc.end - rsrc.start);
if (!msgr_block_addr) {
dev_err(&dev->dev, "Failed to iomap MPIC message registers");
return -EFAULT;
}
/* Ensure the block has a defined order. */
block_number = mpic_msgr_block_number(np);
if (block_number < 0) {
dev_err(&dev->dev,
"Failed to find message register block alias\n");
return -ENODEV;
}
dev_info(&dev->dev, "Setting up message register block %d\n",
block_number);
/* Grab the receive mask which specifies what registers can receive
* interrupts.
*/
prop = of_get_property(np, "mpic-msgr-receive-mask", NULL);
receive_mask = (prop) ? *prop : 0xF;
/* Build up the appropriate message register data structures. */
for (i = 0, irq_index = 0; i < MPIC_MSGR_REGISTERS_PER_BLOCK; ++i) {
struct mpic_msgr *msgr;
unsigned int reg_number;
msgr = kzalloc(sizeof(struct mpic_msgr), GFP_KERNEL);
if (!msgr) {
dev_err(&dev->dev, "No memory for message register\n");
return -ENOMEM;
}
reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE;
msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET;
msgr->in_use = MSGR_FREE;
msgr->num = i;
raw_spin_lock_init(&msgr->lock);
if (receive_mask & (1 << i)) {
struct resource irq;
if (of_irq_to_resource(np, irq_index, &irq) == NO_IRQ) {
dev_err(&dev->dev,
"Missing interrupt specifier");
kfree(msgr);
return -EFAULT;
}
msgr->irq = irq.start;
irq_index += 1;
} else {
msgr->irq = NO_IRQ;
}
mpic_msgrs[reg_number] = msgr;
mpic_msgr_disable(msgr);
dev_info(&dev->dev, "Register %d initialized: irq %d\n",
reg_number, msgr->irq);
}
return 0;
}
static const struct of_device_id mpic_msgr_ids[] = {
{
.compatible = "fsl,mpic-v3.1-msgr",
.data = NULL,
},
{}
};
static struct platform_driver mpic_msgr_driver = {
.driver = {
.name = "mpic-msgr",
.owner = THIS_MODULE,
.of_match_table = mpic_msgr_ids,
},
.probe = mpic_msgr_probe,
};
static __init int mpic_msgr_init(void)
{
return platform_driver_register(&mpic_msgr_driver);
}
subsys_initcall(mpic_msgr_init);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册