提交 85c0b2ab 编写于 作者: D Dave Chinner 提交者: Felix Blyakher

xfs: factor out inode initialisation

Factor out code to initialize new inode clusters into a function of it's own.
This keeps xfs_ialloc_ag_alloc smaller and better structured and enables a
future inode cluster initialization transaction.  Also initialize the agno
variable earlier in xfs_ialloc_ag_alloc to avoid repeated byte swaps.

[hch:  The original patch is from Dave from his unpublished inode create
 transaction patch series, with some modifcations by me to apply stand-alone]
Signed-off-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>
上级 1da1daed
......@@ -152,6 +152,87 @@ xfs_inobt_get_rec(
return error;
}
/*
* Initialise a new set of inodes.
*/
STATIC void
xfs_ialloc_inode_init(
struct xfs_mount *mp,
struct xfs_trans *tp,
xfs_agnumber_t agno,
xfs_agblock_t agbno,
xfs_agblock_t length,
unsigned int gen)
{
struct xfs_buf *fbuf;
struct xfs_dinode *free;
int blks_per_cluster, nbufs, ninodes;
int version;
int i, j;
xfs_daddr_t d;
/*
* Loop over the new block(s), filling in the inodes.
* For small block sizes, manipulate the inodes in buffers
* which are multiples of the blocks size.
*/
if (mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(mp)) {
blks_per_cluster = 1;
nbufs = length;
ninodes = mp->m_sb.sb_inopblock;
} else {
blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) /
mp->m_sb.sb_blocksize;
nbufs = length / blks_per_cluster;
ninodes = blks_per_cluster * mp->m_sb.sb_inopblock;
}
/*
* Figure out what version number to use in the inodes we create.
* If the superblock version has caught up to the one that supports
* the new inode format, then use the new inode version. Otherwise
* use the old version so that old kernels will continue to be
* able to use the file system.
*/
if (xfs_sb_version_hasnlink(&mp->m_sb))
version = 2;
else
version = 1;
for (j = 0; j < nbufs; j++) {
/*
* Get the block.
*/
d = XFS_AGB_TO_DADDR(mp, agno, agbno + (j * blks_per_cluster));
fbuf = xfs_trans_get_buf(tp, mp->m_ddev_targp, d,
mp->m_bsize * blks_per_cluster,
XFS_BUF_LOCK);
ASSERT(fbuf);
ASSERT(!XFS_BUF_GETERROR(fbuf));
/*
* Initialize all inodes in this buffer and then log them.
*
* XXX: It would be much better if we had just one transaction
* to log a whole cluster of inodes instead of all the
* individual transactions causing a lot of log traffic.
*/
xfs_biozero(fbuf, 0, ninodes << mp->m_sb.sb_inodelog);
for (i = 0; i < ninodes; i++) {
int ioffset = i << mp->m_sb.sb_inodelog;
uint isize = sizeof(struct xfs_dinode);
free = xfs_make_iptr(mp, fbuf, i);
free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
free->di_version = version;
free->di_gen = cpu_to_be32(gen);
free->di_next_unlinked = cpu_to_be32(NULLAGINO);
xfs_trans_log_buf(tp, fbuf, ioffset, ioffset + isize - 1);
}
xfs_trans_inode_alloc_buf(tp, fbuf);
}
}
/*
* Allocate new inodes in the allocation group specified by agbp.
* Return 0 for success, else error code.
......@@ -164,24 +245,15 @@ xfs_ialloc_ag_alloc(
{
xfs_agi_t *agi; /* allocation group header */
xfs_alloc_arg_t args; /* allocation argument structure */
int blks_per_cluster; /* fs blocks per inode cluster */
xfs_btree_cur_t *cur; /* inode btree cursor */
xfs_daddr_t d; /* disk addr of buffer */
xfs_agnumber_t agno;
int error;
xfs_buf_t *fbuf; /* new free inodes' buffer */
xfs_dinode_t *free; /* new free inode structure */
int i; /* inode counter */
int j; /* block counter */
int nbufs; /* num bufs of new inodes */
int i;
xfs_agino_t newino; /* new first inode's number */
xfs_agino_t newlen; /* new number of inodes */
int ninodes; /* num inodes per buf */
xfs_agino_t thisino; /* current inode number, for loop */
int version; /* inode version number to use */
int isaligned = 0; /* inode allocation at stripe unit */
/* boundary */
unsigned int gen;
args.tp = tp;
args.mp = tp->t_mountp;
......@@ -202,12 +274,12 @@ xfs_ialloc_ag_alloc(
*/
agi = XFS_BUF_TO_AGI(agbp);
newino = be32_to_cpu(agi->agi_newino);
agno = be32_to_cpu(agi->agi_seqno);
args.agbno = XFS_AGINO_TO_AGBNO(args.mp, newino) +
XFS_IALLOC_BLOCKS(args.mp);
if (likely(newino != NULLAGINO &&
(args.agbno < be32_to_cpu(agi->agi_length)))) {
args.fsbno = XFS_AGB_TO_FSB(args.mp,
be32_to_cpu(agi->agi_seqno), args.agbno);
args.fsbno = XFS_AGB_TO_FSB(args.mp, agno, args.agbno);
args.type = XFS_ALLOCTYPE_THIS_BNO;
args.mod = args.total = args.wasdel = args.isfl =
args.userdata = args.minalignslop = 0;
......@@ -258,8 +330,7 @@ xfs_ialloc_ag_alloc(
* For now, just allocate blocks up front.
*/
args.agbno = be32_to_cpu(agi->agi_root);
args.fsbno = XFS_AGB_TO_FSB(args.mp,
be32_to_cpu(agi->agi_seqno), args.agbno);
args.fsbno = XFS_AGB_TO_FSB(args.mp, agno, args.agbno);
/*
* Allocate a fixed-size extent of inodes.
*/
......@@ -282,8 +353,7 @@ xfs_ialloc_ag_alloc(
if (isaligned && args.fsbno == NULLFSBLOCK) {
args.type = XFS_ALLOCTYPE_NEAR_BNO;
args.agbno = be32_to_cpu(agi->agi_root);
args.fsbno = XFS_AGB_TO_FSB(args.mp,
be32_to_cpu(agi->agi_seqno), args.agbno);
args.fsbno = XFS_AGB_TO_FSB(args.mp, agno, args.agbno);
args.alignment = xfs_ialloc_cluster_alignment(&args);
if ((error = xfs_alloc_vextent(&args)))
return error;
......@@ -294,85 +364,30 @@ xfs_ialloc_ag_alloc(
return 0;
}
ASSERT(args.len == args.minlen);
/*
* Convert the results.
*/
newino = XFS_OFFBNO_TO_AGINO(args.mp, args.agbno, 0);
/*
* Loop over the new block(s), filling in the inodes.
* For small block sizes, manipulate the inodes in buffers
* which are multiples of the blocks size.
*/
if (args.mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(args.mp)) {
blks_per_cluster = 1;
nbufs = (int)args.len;
ninodes = args.mp->m_sb.sb_inopblock;
} else {
blks_per_cluster = XFS_INODE_CLUSTER_SIZE(args.mp) /
args.mp->m_sb.sb_blocksize;
nbufs = (int)args.len / blks_per_cluster;
ninodes = blks_per_cluster * args.mp->m_sb.sb_inopblock;
}
/*
* Figure out what version number to use in the inodes we create.
* If the superblock version has caught up to the one that supports
* the new inode format, then use the new inode version. Otherwise
* use the old version so that old kernels will continue to be
* able to use the file system.
*/
if (xfs_sb_version_hasnlink(&args.mp->m_sb))
version = 2;
else
version = 1;
/*
* Stamp and write the inode buffers.
*
* Seed the new inode cluster with a random generation number. This
* prevents short-term reuse of generation numbers if a chunk is
* freed and then immediately reallocated. We use random numbers
* rather than a linear progression to prevent the next generation
* number from being easily guessable.
*/
gen = random32();
for (j = 0; j < nbufs; j++) {
/*
* Get the block.
*/
d = XFS_AGB_TO_DADDR(args.mp, be32_to_cpu(agi->agi_seqno),
args.agbno + (j * blks_per_cluster));
fbuf = xfs_trans_get_buf(tp, args.mp->m_ddev_targp, d,
args.mp->m_bsize * blks_per_cluster,
XFS_BUF_LOCK);
ASSERT(fbuf);
ASSERT(!XFS_BUF_GETERROR(fbuf));
xfs_ialloc_inode_init(args.mp, tp, agno, args.agbno, args.len,
random32());
/*
* Initialize all inodes in this buffer and then log them.
*
* XXX: It would be much better if we had just one transaction to
* log a whole cluster of inodes instead of all the individual
* transactions causing a lot of log traffic.
*/
xfs_biozero(fbuf, 0, ninodes << args.mp->m_sb.sb_inodelog);
for (i = 0; i < ninodes; i++) {
int ioffset = i << args.mp->m_sb.sb_inodelog;
uint isize = sizeof(struct xfs_dinode);
free = xfs_make_iptr(args.mp, fbuf, i);
free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
free->di_version = version;
free->di_gen = cpu_to_be32(gen);
free->di_next_unlinked = cpu_to_be32(NULLAGINO);
xfs_trans_log_buf(tp, fbuf, ioffset, ioffset + isize - 1);
}
xfs_trans_inode_alloc_buf(tp, fbuf);
}
/*
* Convert the results.
*/
newino = XFS_OFFBNO_TO_AGINO(args.mp, args.agbno, 0);
be32_add_cpu(&agi->agi_count, newlen);
be32_add_cpu(&agi->agi_freecount, newlen);
agno = be32_to_cpu(agi->agi_seqno);
down_read(&args.mp->m_peraglock);
args.mp->m_perag[agno].pagi_freecount += newlen;
up_read(&args.mp->m_peraglock);
agi->agi_newino = cpu_to_be32(newino);
/*
* Insert records describing the new inode chunk into the btree.
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册