提交 84b790f8 编写于 作者: B Ben Widawsky 提交者: Daniel Vetter

drm/i915/bdw: Implement context switching (somewhat)

A context switch occurs by submitting a context descriptor to the
ExecList Submission Port. Given that we can now initialize a context,
it's possible to begin implementing the context switch by creating the
descriptor and submitting it to ELSP (actually two, since the ELSP
has two ports).

The context object must be mapped in the GGTT, which means it must exist
in the 0-4GB graphics VA range.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

v2: This code has changed quite a lot in various rebases. Of particular
importance is that now we use the globally unique Submission ID to send
to the hardware. Also, context pages are now pinned unconditionally to
GGTT, so there is no need to bind them.

v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context
ID we submit to the ELSP is globally unique and != 0 (Bspec requirements
of the software use-only bits of the Context ID in the Context Descriptor
Format) without the hassle of the previous submission Id construction.
Also, re-add the ELSP porting read (it was dropped somewhere during the
rebases).

v4:
- Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC
  says: "SW must set Force Wakeup bit to prevent GT from entering C6 while
  ELSP writes are in progress") as noted by Thomas Daniel
  (thomas.daniel@intel.com).
- Rename functions and use an execlists/intel_execlists_ namespace.
- The BUG_ON only checked that the LRCA was <32 bits, but it didn't make
  sure that it was properly aligned. Spotted by Alistair Mcaulay
  <alistair.mcaulay@intel.com>.

v5:
- Improved source code comments as suggested by Chris Wilson.
- No need to abstract submit_ctx away, as pointed by Brad Volkin.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch. Sigh.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 48e29f55
......@@ -47,6 +47,7 @@
#define GEN8_LR_CONTEXT_ALIGN 4096
#define RING_ELSP(ring) ((ring)->mmio_base+0x230)
#define RING_EXECLIST_STATUS(ring) ((ring)->mmio_base+0x234)
#define RING_CONTEXT_CONTROL(ring) ((ring)->mmio_base+0x244)
#define CTX_LRI_HEADER_0 0x01
......@@ -78,6 +79,26 @@
#define CTX_R_PWR_CLK_STATE 0x42
#define CTX_GPGPU_CSR_BASE_ADDRESS 0x44
#define GEN8_CTX_VALID (1<<0)
#define GEN8_CTX_FORCE_PD_RESTORE (1<<1)
#define GEN8_CTX_FORCE_RESTORE (1<<2)
#define GEN8_CTX_L3LLC_COHERENT (1<<5)
#define GEN8_CTX_PRIVILEGE (1<<8)
enum {
ADVANCED_CONTEXT = 0,
LEGACY_CONTEXT,
ADVANCED_AD_CONTEXT,
LEGACY_64B_CONTEXT
};
#define GEN8_CTX_MODE_SHIFT 3
enum {
FAULT_AND_HANG = 0,
FAULT_AND_HALT, /* Debug only */
FAULT_AND_STREAM,
FAULT_AND_CONTINUE /* Unsupported */
};
#define GEN8_CTX_ID_SHIFT 32
int intel_sanitize_enable_execlists(struct drm_device *dev, int enable_execlists)
{
WARN_ON(i915.enable_ppgtt == -1);
......@@ -92,6 +113,93 @@ int intel_sanitize_enable_execlists(struct drm_device *dev, int enable_execlists
return 0;
}
u32 intel_execlists_ctx_id(struct drm_i915_gem_object *ctx_obj)
{
u32 lrca = i915_gem_obj_ggtt_offset(ctx_obj);
/* LRCA is required to be 4K aligned so the more significant 20 bits
* are globally unique */
return lrca >> 12;
}
static uint64_t execlists_ctx_descriptor(struct drm_i915_gem_object *ctx_obj)
{
uint64_t desc;
uint64_t lrca = i915_gem_obj_ggtt_offset(ctx_obj);
BUG_ON(lrca & 0xFFFFFFFF00000FFFULL);
desc = GEN8_CTX_VALID;
desc |= LEGACY_CONTEXT << GEN8_CTX_MODE_SHIFT;
desc |= GEN8_CTX_L3LLC_COHERENT;
desc |= GEN8_CTX_PRIVILEGE;
desc |= lrca;
desc |= (u64)intel_execlists_ctx_id(ctx_obj) << GEN8_CTX_ID_SHIFT;
/* TODO: WaDisableLiteRestore when we start using semaphore
* signalling between Command Streamers */
/* desc |= GEN8_CTX_FORCE_RESTORE; */
return desc;
}
static void execlists_elsp_write(struct intel_engine_cs *ring,
struct drm_i915_gem_object *ctx_obj0,
struct drm_i915_gem_object *ctx_obj1)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
uint64_t temp = 0;
uint32_t desc[4];
/* XXX: You must always write both descriptors in the order below. */
if (ctx_obj1)
temp = execlists_ctx_descriptor(ctx_obj1);
else
temp = 0;
desc[1] = (u32)(temp >> 32);
desc[0] = (u32)temp;
temp = execlists_ctx_descriptor(ctx_obj0);
desc[3] = (u32)(temp >> 32);
desc[2] = (u32)temp;
/* Set Force Wakeup bit to prevent GT from entering C6 while
* ELSP writes are in progress */
gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
I915_WRITE(RING_ELSP(ring), desc[1]);
I915_WRITE(RING_ELSP(ring), desc[0]);
I915_WRITE(RING_ELSP(ring), desc[3]);
/* The context is automatically loaded after the following */
I915_WRITE(RING_ELSP(ring), desc[2]);
/* ELSP is a wo register, so use another nearby reg for posting instead */
POSTING_READ(RING_EXECLIST_STATUS(ring));
gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
}
static int execlists_submit_context(struct intel_engine_cs *ring,
struct intel_context *to0, u32 tail0,
struct intel_context *to1, u32 tail1)
{
struct drm_i915_gem_object *ctx_obj0;
struct drm_i915_gem_object *ctx_obj1 = NULL;
ctx_obj0 = to0->engine[ring->id].state;
BUG_ON(!ctx_obj0);
BUG_ON(!i915_gem_obj_is_pinned(ctx_obj0));
if (to1) {
ctx_obj1 = to1->engine[ring->id].state;
BUG_ON(!ctx_obj1);
BUG_ON(!i915_gem_obj_is_pinned(ctx_obj1));
}
execlists_elsp_write(ring, ctx_obj0, ctx_obj1);
return 0;
}
static int logical_ring_invalidate_all_caches(struct intel_ringbuffer *ringbuf)
{
struct intel_engine_cs *ring = ringbuf->ring;
......@@ -270,12 +378,16 @@ int logical_ring_flush_all_caches(struct intel_ringbuffer *ringbuf)
void intel_logical_ring_advance_and_submit(struct intel_ringbuffer *ringbuf)
{
struct intel_engine_cs *ring = ringbuf->ring;
struct intel_context *ctx = ringbuf->FIXME_lrc_ctx;
intel_logical_ring_advance(ringbuf);
if (intel_ring_stopped(ringbuf->ring))
if (intel_ring_stopped(ring))
return;
/* TODO: how to submit a context to the ELSP is not here yet */
/* FIXME: too cheeky, we don't even check if the ELSP is ready */
execlists_submit_context(ring, ctx, ringbuf->tail, NULL, 0);
}
static int logical_ring_alloc_seqno(struct intel_engine_cs *ring,
......
......@@ -57,5 +57,6 @@ int intel_execlists_submission(struct drm_device *dev, struct drm_file *file,
struct list_head *vmas,
struct drm_i915_gem_object *batch_obj,
u64 exec_start, u32 flags);
u32 intel_execlists_ctx_id(struct drm_i915_gem_object *ctx_obj);
#endif /* _INTEL_LRC_H_ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册